From: Heinrich Schuchardt Date: Tue, 31 Oct 2023 12:55:52 +0000 (+0200) Subject: rng: Provide a RNG based on the RISC-V Zkr ISA extension X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=ceec977ba1a994df423cd8558f72d6582e63da08;p=u-boot.git rng: Provide a RNG based on the RISC-V Zkr ISA extension The Zkr ISA extension (ratified Nov 2021) introduced the seed CSR. It provides an interface to a physical entropy source. A RNG driver based on the seed CSR is provided. It depends on mseccfg.sseed being set in the SBI firmware. Signed-off-by: Heinrich Schuchardt Reviewed-by: Leo Yu-Chi Liang --- diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig index 994cc35b27..4f6e367169 100644 --- a/drivers/rng/Kconfig +++ b/drivers/rng/Kconfig @@ -48,6 +48,14 @@ config RNG_OPTEE accessible to normal world but reserved and used by the OP-TEE to avoid the weakness of a software PRNG. +config RNG_RISCV_ZKR + bool "RISC-V Zkr random number generator" + depends on RISCV_SMODE + help + This driver provides a Random Number Generator based on the + Zkr RISC-V ISA extension which provides an interface to an + NIST SP 800-90B or BSI AIS-31 compliant physical entropy source. + config RNG_STM32 bool "Enable random number generator for STM32" depends on ARCH_STM32 || ARCH_STM32MP diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile index 47b323e61e..a5d3ca4130 100644 --- a/drivers/rng/Makefile +++ b/drivers/rng/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_RNG_MSM) += msm_rng.o obj-$(CONFIG_RNG_NPCM) += npcm_rng.o obj-$(CONFIG_RNG_OPTEE) += optee_rng.o obj-$(CONFIG_RNG_STM32) += stm32_rng.o +obj-$(CONFIG_RNG_RISCV_ZKR) += riscv_zkr_rng.o obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o obj-$(CONFIG_RNG_IPROC200) += iproc_rng200.o obj-$(CONFIG_RNG_SMCCC_TRNG) += smccc_trng.o diff --git a/drivers/rng/riscv_zkr_rng.c b/drivers/rng/riscv_zkr_rng.c new file mode 100644 index 0000000000..8c9e111e2e --- /dev/null +++ b/drivers/rng/riscv_zkr_rng.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * The RISC-V Zkr extension provides CSR seed which provides access to a + * random number generator. + */ + +#define LOG_CATEGORY UCLASS_RNG + +#include +#include +#include +#include + +#define DRIVER_NAME "riscv_zkr" + +enum opst { + /** @BIST: built in self test running */ + BIST = 0b00, + /** @WAIT: sufficient amount of entropy is not yet available */ + WAIT = 0b01, + /** @ES16: 16bits of entropy available */ + ES16 = 0b10, + /** @DEAD: unrecoverable self-test error */ + DEAD = 0b11, +}; + +static unsigned long read_seed(void) +{ + unsigned long ret; + + __asm__ __volatile__("csrrw %0, seed, x0" : "=r" (ret) : : "memory"); + + return ret; +} + +static int riscv_zkr_read(struct udevice *dev, void *data, size_t len) +{ + u8 *ptr = data; + + while (len) { + u32 val; + + val = read_seed(); + + switch (val >> 30) { + case BIST: + continue; + case WAIT: + continue; + case ES16: + *ptr++ = val & 0xff; + if (--len) { + *ptr++ = val >> 8; + --len; + } + break; + case DEAD: + return -ENODEV; + } + } + + return 0; +} + +/** + * riscv_zkr_probe() - check if the seed register is available + * + * If the SBI software has not set mseccfg.sseed=1 or the Zkr + * extension is not available this probe function will result + * in an exception. Currently we cannot recover from this. + * + * @dev: RNG device + * Return: 0 if successfully probed + */ +static int riscv_zkr_probe(struct udevice *dev) +{ + struct resume_data resume; + int ret; + u32 val; + + /* Check if reading seed leads to interrupt */ + set_resume(&resume); + ret = setjmp(resume.jump); + if (ret) + log_debug("Exception %ld reading seed CSR\n", resume.code); + else + val = read_seed(); + set_resume(NULL); + if (ret) + return -ENODEV; + + do { + val = read_seed(); + val >>= 30; + } while (val == BIST || val == WAIT); + + if (val == DEAD) + return -ENODEV; + + return 0; +} + +static const struct dm_rng_ops riscv_zkr_ops = { + .read = riscv_zkr_read, +}; + +U_BOOT_DRIVER(riscv_zkr) = { + .name = DRIVER_NAME, + .id = UCLASS_RNG, + .ops = &riscv_zkr_ops, + .probe = riscv_zkr_probe, +}; + +U_BOOT_DRVINFO(cpu_riscv_zkr) = { + .name = DRIVER_NAME, +};