From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 10 Sep 2019 09:48:52 +0000 (+0200)
Subject: arm64: zynqmp: Enable SPI support in SPL for zcu104
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=cbe3101018a13d7cdb52e96a08577a83f2a0dbc0;p=u-boot.git

arm64: zynqmp: Enable SPI support in SPL for zcu104

It is enabling this mode but full boot is not validated yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig
index 1c9a6d6f1e..2f269009df 100644
--- a/configs/xilinx_zynqmp_zcu104_revC_defconfig
+++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig
@@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xff000000
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_ZYNQMP_USB=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -16,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_CMD_MEMTEST=y