From: Stefan Roese Date: Sat, 25 Apr 2015 04:29:52 +0000 (+0200) Subject: arm: mvebu: Change network init code to allow a more flexible setup X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=cae9008f69ab07b6faf75ebd0167ef06b8ebaf99;p=u-boot.git arm: mvebu: Change network init code to allow a more flexible setup With the introduction of the Armada 38x support, its necessary to change the mvneta ethernet driver init call from always 4 times to a configurable value. Lets make this init call more flexible by moving the actually used devices to the config header. Additionally this patch takes care of the slightly different base addresses for the ethernet controllers on A38x. Signed-off-by: Stefan Roese Tested-by: Kevin Smith Tested-by: Dirk Eibach Acked-by: Joe Hershberger --- diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index eca5e2176c..8058fadb22 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -216,10 +216,22 @@ int arch_misc_init(void) #ifdef CONFIG_MVNETA int cpu_eth_init(bd_t *bis) { - mvneta_initialize(bis, MVEBU_EGIGA0_BASE, 0, CONFIG_PHY_BASE_ADDR + 0); - mvneta_initialize(bis, MVEBU_EGIGA1_BASE, 1, CONFIG_PHY_BASE_ADDR + 1); - mvneta_initialize(bis, MVEBU_EGIGA2_BASE, 2, CONFIG_PHY_BASE_ADDR + 2); - mvneta_initialize(bis, MVEBU_EGIGA3_BASE, 3, CONFIG_PHY_BASE_ADDR + 3); + u32 enet_base[] = { MVEBU_EGIGA0_BASE, MVEBU_EGIGA1_BASE, + MVEBU_EGIGA2_BASE, MVEBU_EGIGA3_BASE }; + u8 phy_addr[] = CONFIG_PHY_ADDR; + int i; + + /* + * Only Armada XP supports all 4 ethernet interfaces. A38x has + * slightly different base addresses for its 2-3 interfaces. + */ + if (mvebu_soc_family() != MVEBU_SOC_AXP) { + enet_base[1] = MVEBU_EGIGA2_BASE; + enet_base[2] = MVEBU_EGIGA3_BASE; + } + + for (i = 0; i < ARRAY_SIZE(phy_addr); i++) + mvneta_initialize(bis, enet_base[i], i, phy_addr[i]); return 0; } diff --git a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c b/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c index b3dae8910d..00ca878873 100644 --- a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c +++ b/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c @@ -86,7 +86,8 @@ int checkboard(void) /* Configure and enable MV88E1545 PHY */ void reset_phy(void) { - u16 devadr = CONFIG_PHY_BASE_ADDR; + u8 phy_addr[] = CONFIG_PHY_ADDR; + u16 devadr = phy_addr[0]; char *name = "neta0"; u16 reg; diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 897f473f0c..77d34080fd 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -53,7 +53,7 @@ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define CONFIG_PHY_BASE_ADDR 0x10 +#define CONFIG_PHY_ADDR { 0x10, 0x11, 0x12, 0x13 } #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ #define CONFIG_RESET_PHY_R diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index a0ff067d1d..d8811a47cd 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -53,7 +53,7 @@ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define CONFIG_PHY_BASE_ADDR 0x0 +#define CONFIG_PHY_ADDR { 0x0, 0x1, 0x2, 0x3 } #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ #define CONFIG_RESET_PHY_R