From: Vinitha Pillai-B57223 Date: Tue, 9 Jan 2018 17:33:42 +0000 (+0530) Subject: armv8: ls1012ardb: Add distro secure boot support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=c883f351e61f425f72d110375eaa80d5ecb5ee64;p=u-boot.git armv8: ls1012ardb: Add distro secure boot support Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to qspi boot in case of secure boot. Signed-off-by: Sumit Garg Signed-off-by: Vinitha Pillai Reviewed-by: York Sun --- diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig index b6930be338..0bec6b265f 100644 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -2,7 +2,9 @@ CONFIG_ARM=y CONFIG_TARGET_LS1012ARDB=y CONFIG_SECURE_BOOT=y CONFIG_FSL_LS_PPA=y +CONFIG_QSPI_AHB_INIT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb" +CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -12,7 +14,7 @@ CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_HUSH_PARSER=y +# CONFIG_DISPLAY_BOARDINFO is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y @@ -20,16 +22,12 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +# CONFIG_BLK is not set +CONFIG_DM_MMC=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y @@ -42,6 +40,7 @@ CONFIG_SYS_NS16550=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 438b5a6338..97ed9092e0 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -63,16 +63,20 @@ "initrd_high=0xffffffffffffffff\0" \ "fdt_addr=0x00f00000\0" \ "kernel_addr=0x01000000\0" \ + "kernelheader_addr=0x800000\0" \ "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ "kernel_addr_r=0x81000000\0" \ "fdt_addr_r=0x90000000\0" \ "load_addr=0xa0000000\0" \ "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ "console=ttyS0,115200\0" \ BOOTENV \ "boot_scripts=ls1012ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls1012ardb_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ @@ -90,15 +94,27 @@ "run scan_dev_for_scripts; " \ "done;" \ "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ - "$kernel_addr $kernel_size && bootm $load_addr#$board\0" + "$kernel_addr $kernel_size; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" #undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ + "env exists secureboot && esbc_halt;" #include