From: Masahiro Yamada Date: Fri, 13 Oct 2017 10:21:51 +0000 (+0900) Subject: gpio: uniphier: rework single device node model X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=c5fb1c25249a68725cf76e98ccce316bdb8bbf61;p=u-boot.git gpio: uniphier: rework single device node model First, I implemented this driver as per-bank model, but it was a design mistake. - There are 31 banks in the maximum case. It is painful to add so many nodes to DT. - The IRQ control registers are shared between banks. Per-bank design is a problem for Linux. The counterpart for Linux turned around to the single node model. Rework based on the driver for Linux. Signed-off-by: Masahiro Yamada --- diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c index c11e95355b..107c3fcb10 100644 --- a/drivers/gpio/gpio-uniphier.c +++ b/drivers/gpio/gpio-uniphier.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2016 Socionext Inc. + * Copyright (C) 2016-2017 Socionext Inc. * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ @@ -11,73 +11,123 @@ #include #include #include +#include #include -#define UNIPHIER_GPIO_PORTS_PER_BANK 8 +#define UNIPHIER_GPIO_LINES_PER_BANK 8 -#define UNIPHIER_GPIO_REG_DATA 0 /* data */ -#define UNIPHIER_GPIO_REG_DIR 4 /* direction (1:in, 0:out) */ +#define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */ +#define UNIPHIER_GPIO_PORT_DIR 0x4 /* direction (1:in, 0:out) */ +#define UNIPHIER_GPIO_IRQ_EN 0x90 /* irq enable */ struct uniphier_gpio_priv { - void __iomem *base; - char bank_name[16]; + void __iomem *regs; }; -static void uniphier_gpio_offset_write(struct udevice *dev, unsigned offset, - unsigned reg, int value) +static unsigned int uniphier_gpio_bank_to_reg(unsigned int bank) +{ + unsigned int reg; + + reg = (bank + 1) * 8; + + /* + * Unfortunately, the GPIO port registers are not contiguous because + * offset 0x90-0x9f is used for IRQ. Add 0x10 when crossing the region. + */ + if (reg >= UNIPHIER_GPIO_IRQ_EN) + reg += 0x10; + + return reg; +} + +static void uniphier_gpio_get_bank_and_mask(unsigned int offset, + unsigned int *bank, u32 *mask) +{ + *bank = offset / UNIPHIER_GPIO_LINES_PER_BANK; + *mask = BIT(offset % UNIPHIER_GPIO_LINES_PER_BANK); +} + +static void uniphier_gpio_reg_update(struct uniphier_gpio_priv *priv, + unsigned int reg, u32 mask, u32 val) { - struct uniphier_gpio_priv *priv = dev_get_priv(dev); u32 tmp; - tmp = readl(priv->base + reg); - if (value) - tmp |= BIT(offset); - else - tmp &= ~BIT(offset); - writel(tmp, priv->base + reg); + tmp = readl(priv->regs + reg); + tmp &= ~mask; + tmp |= mask & val; + writel(tmp, priv->regs + reg); } -static int uniphier_gpio_offset_read(struct udevice *dev, unsigned offset, - unsigned reg) +static void uniphier_gpio_bank_write(struct udevice *dev, unsigned int bank, + unsigned int reg, u32 mask, u32 val) { struct uniphier_gpio_priv *priv = dev_get_priv(dev); - return !!(readl(priv->base + reg) & BIT(offset)); + if (!mask) + return; + + uniphier_gpio_reg_update(priv, uniphier_gpio_bank_to_reg(bank) + reg, + mask, val); } -static int uniphier_gpio_direction_input(struct udevice *dev, unsigned offset) +static void uniphier_gpio_offset_write(struct udevice *dev, unsigned int offset, + unsigned int reg, int val) { - uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_REG_DIR, 1); + unsigned int bank; + u32 mask; - return 0; + uniphier_gpio_get_bank_and_mask(offset, &bank, &mask); + + uniphier_gpio_bank_write(dev, bank, reg, mask, val ? mask : 0); } -static int uniphier_gpio_direction_output(struct udevice *dev, unsigned offset, - int value) +static int uniphier_gpio_offset_read(struct udevice *dev, + unsigned int offset, unsigned int reg) { - uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_REG_DATA, value); - uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_REG_DIR, 0); + struct uniphier_gpio_priv *priv = dev_get_priv(dev); + unsigned int bank, reg_offset; + u32 mask; - return 0; + uniphier_gpio_get_bank_and_mask(offset, &bank, &mask); + reg_offset = uniphier_gpio_bank_to_reg(bank) + reg; + + return !!(readl(priv->regs + reg_offset) & mask); } -static int uniphier_gpio_get_value(struct udevice *dev, unsigned offset) +static int uniphier_gpio_get_function(struct udevice *dev, unsigned int offset) { - return uniphier_gpio_offset_read(dev, offset, UNIPHIER_GPIO_REG_DATA); + return uniphier_gpio_offset_read(dev, offset, UNIPHIER_GPIO_PORT_DIR) ? + GPIOF_INPUT : GPIOF_OUTPUT; } -static int uniphier_gpio_set_value(struct udevice *dev, unsigned offset, - int value) +static int uniphier_gpio_direction_input(struct udevice *dev, + unsigned int offset) { - uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_REG_DATA, value); + uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_PORT_DIR, 1); return 0; } -static int uniphier_gpio_get_function(struct udevice *dev, unsigned offset) +static int uniphier_gpio_direction_output(struct udevice *dev, + unsigned int offset, int value) { - return uniphier_gpio_offset_read(dev, offset, UNIPHIER_GPIO_REG_DIR) ? - GPIOF_INPUT : GPIOF_OUTPUT; + uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_PORT_DATA, value); + uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_PORT_DIR, 0); + + return 0; +} + +static int uniphier_gpio_get_value(struct udevice *dev, unsigned int offset) +{ + return uniphier_gpio_offset_read(dev, offset, UNIPHIER_GPIO_PORT_DATA); +} + +static int uniphier_gpio_set_value(struct udevice *dev, + unsigned int offset, int value) +{ + uniphier_gpio_offset_write(dev, offset, UNIPHIER_GPIO_PORT_DATA, value); + + return 0; } static const struct dm_gpio_ops uniphier_gpio_ops = { @@ -93,40 +143,28 @@ static int uniphier_gpio_probe(struct udevice *dev) struct uniphier_gpio_priv *priv = dev_get_priv(dev); struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); fdt_addr_t addr; - unsigned int tmp; addr = devfdt_get_addr(dev); if (addr == FDT_ADDR_T_NONE) return -EINVAL; - priv->base = devm_ioremap(dev, addr, SZ_8); - if (!priv->base) + priv->regs = devm_ioremap(dev, addr, SZ_512); + if (!priv->regs) return -ENOMEM; - uc_priv->gpio_count = UNIPHIER_GPIO_PORTS_PER_BANK; - - tmp = (addr & 0xfff); - - /* Unfortunately, there is a register hole at offset 0x90-0x9f. */ - if (tmp > 0x90) - tmp -= 0x10; - - snprintf(priv->bank_name, sizeof(priv->bank_name) - 1, - "port%d-", (tmp - 8) / 8); - - uc_priv->bank_name = priv->bank_name; + uc_priv->gpio_count = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), + "ngpios", 0); return 0; } -/* .data = the number of GPIO banks */ static const struct udevice_id uniphier_gpio_match[] = { { .compatible = "socionext,uniphier-gpio" }, { /* sentinel */ } }; U_BOOT_DRIVER(uniphier_gpio) = { - .name = "uniphier_gpio", + .name = "uniphier-gpio", .id = UCLASS_GPIO, .of_match = uniphier_gpio_match, .probe = uniphier_gpio_probe,