From: Tim Harvey <tharvey@gateworks.com>
Date: Sat, 9 May 2015 01:28:39 +0000 (-0700)
Subject: imx: ventana: add gpio setup to SPL
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=c4b44d76998b9abdca09093d044a39e4c773052f;p=u-boot.git

imx: ventana: add gpio setup to SPL

If the SPL is to be used for Falcon mode then we need to make sure it
configures basic GPIO (iomux, padconf, and default output levels).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 82078a0c5e..cde04cfacc 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -510,6 +510,9 @@ void board_init_f(ulong dummy)
 	/* read/validate EEPROM info to determine board model and SDRAM cfg */
 	board_model = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
 
+	/* configure model-specific gpio */
+	setup_iomux_gpio(board_model, &ventana_info);
+
 	/* provide some some default: 32bit 128MB */
 	if (GW_UNKNOWN == board_model) {
 		ventana_info.sdram_width = 2;