From: Michal Simek Date: Wed, 4 May 2016 13:14:11 +0000 (+0200) Subject: spl: Setup default value for OF_LIST X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=c409bd015c295ba088af75b117d1dd6ebd8080ba;p=u-boot.git spl: Setup default value for OF_LIST OF_LIST can't remain empty that's why setup it up to default DTB. If it is empty u-boot.img is created without FDT partition: For example: ./tools/mkimage -f auto -A arm -T firmware -C none -O u-boot -a 0x8000000 -e 0 -n "U-Boot 2016.05-rc3 ..." -E -b -d u-boot-nodtb.bin u-boot.img Can't set 'timestamp' property for '' node (FDT_ERR_NOSPACE) FIT description: Firmware image with one or more FDT blobs Created: Wed May 4 15:02:52 2016 Image 0 (firmware@1) Description: U-Boot 2016.05-rc3-00080-gff2e12ae22a8-dirty for zynqmp board Created: Wed May 4 15:02:52 2016 Type: Firmware Compression: uncompressed Data Size: unavailable Architecture: ARM Load Address: 0x08000000 Default Configuration: 'conf@1' Configuration 0 (conf@1) Description: unavailable Kernel: unavailable And then image like this doesn't contain description and link to FDT and can't boot. Signed-off-by: Michal Simek Reviewed-by: Tom Rini --- diff --git a/dts/Kconfig b/dts/Kconfig index d585009353..c56c1299c0 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -62,6 +62,7 @@ config DEFAULT_DEVICE_TREE config OF_LIST string "List of device tree files to include for DT control" depends on SPL_LOAD_FIT + default DEFAULT_DEVICE_TREE help This option specifies a list of device tree files to use for DT control. These will be packaged into a FIT. At run-time, SPL will