From: Felix Brack Date: Fri, 22 Sep 2017 12:27:28 +0000 (+0200) Subject: doc: Fix statements on case sensitivity for regulator prefix X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=bd2259e3c40c097c47e1dfc58a03b1df66b44840;p=u-boot.git doc: Fix statements on case sensitivity for regulator prefix The regulator bindings state that regulator prefixes are allowd to be in upper or lower case. However pmic_bind_children from pmic_uclass uses strncmp to compare DT node name against prefix. This comparison is case sensitive hence the regulator driver prefix case matters. Signed-off-by: Felix Brack --- diff --git a/doc/device-tree-bindings/regulator/regulator.txt b/doc/device-tree-bindings/regulator/regulator.txt index 2cf4b9de8b..918711eb4d 100644 --- a/doc/device-tree-bindings/regulator/regulator.txt +++ b/doc/device-tree-bindings/regulator/regulator.txt @@ -10,10 +10,10 @@ pmic: drivers/power/pmic/max77686.c regulator: drivers/power/regulator/max77686.c For the node name e.g.: "prefix[:alpha:]num { ... }": -- the driver prefix should be: "prefix" or "PREFIX" - case insensitive +- the driver prefix should be: "prefix" - case sensitive - the node name's "num" is set as "dev->driver_data" on bind -Example the prefix "ldo" will pass for: "ldo1", "ldo@1", "LDO1", "LDOREG@1"... +Example the prefix "ldo" will pass for: "ldo1", "ldo@1", "ldoreg@1, ... Optional properties: - regulator-name: a string, required by the regulator uclass