From: Alain Volmat Date: Mon, 12 Sep 2022 08:41:59 +0000 (+0200) Subject: i2c: stm32: remove unused stop parameter in start & reload handling X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=bcc7509265928895128c3a3b96087b9005ea6961;p=u-boot.git i2c: stm32: remove unused stop parameter in start & reload handling Functions stm32_i2c_message_start and stm32_i2c_handle_reload both get a stop boolean indicating if the transfer should end with a STOP or not. However no specific handling is needed in those functions hence remove the parameter. Signed-off-by: Alain Volmat Reviewed-by: Patrick Delaunay Reviewed-by: Heiko Schocher Reviewed-by: Patrice Chotard --- diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c index e3b4991eb8..8d680eea9b 100644 --- a/drivers/i2c/stm32f7_i2c.c +++ b/drivers/i2c/stm32f7_i2c.c @@ -282,7 +282,7 @@ static int stm32_i2c_check_device_busy(struct stm32_i2c_priv *i2c_priv) } static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv, - struct i2c_msg *msg, bool stop) + struct i2c_msg *msg) { struct stm32_i2c_regs *regs = i2c_priv->regs; u32 cr2 = readl(®s->cr2); @@ -325,7 +325,7 @@ static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv, */ static void stm32_i2c_handle_reload(struct stm32_i2c_priv *i2c_priv, - struct i2c_msg *msg, bool stop) + struct i2c_msg *msg) { struct stm32_i2c_regs *regs = i2c_priv->regs; u32 cr2 = readl(®s->cr2); @@ -431,7 +431,7 @@ static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv, /* Add errors */ mask |= STM32_I2C_ISR_ERRORS; - stm32_i2c_message_start(i2c_priv, msg, stop); + stm32_i2c_message_start(i2c_priv, msg); while (msg->len) { /* @@ -469,7 +469,7 @@ static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv, mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE : STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF; - stm32_i2c_handle_reload(i2c_priv, msg, stop); + stm32_i2c_handle_reload(i2c_priv, msg); } else if (!bytes_to_rw) { /* Wait until TC flag is set */ mask = STM32_I2C_ISR_TC;