From: Hung-Te Lin Date: Mon, 29 Oct 2012 05:23:53 +0000 (+0000) Subject: ahci: support scsi writing in AHCI driver X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=b7a21b70d0d3f94d7ab3ed84fbf68d2e2b7488bf;p=u-boot.git ahci: support scsi writing in AHCI driver The "scsi write" command requires support from underlying driver. This CL enables SCSI_WRITE10 in AHCI driver. Tested in U-Boot console, try to i/o with sector #64: scsi read 1000 40 1 md.b 1000 200 # check if things are not 0xcc mw.b 1000 cc 200 # try to fill with 0xcc scsi write 1000 40 1 mw.b 1000 0 200 # fill with zero md.b 1000 200 # should be all 0 scsi read 1000 40 1 md.b 1000 200 # should be all 0xcc Signed-off-by: Hung-Te Lin Signed-off-by: Simon Glass --- diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 22363211b3..5092352758 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -43,12 +43,13 @@ hd_driveid_t *ataid[AHCI_MAX_PORTS]; #define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0) /* - * Some controllers limit number of blocks they can read at once. Contemporary - * SSD devices work much faster if the read size is aligned to a power of 2. - * Let's set default to 128 and allowing to be overwritten if needed. + * Some controllers limit number of blocks they can read/write at once. + * Contemporary SSD devices work much faster if the read/write size is aligned + * to a power of 2. Let's set default to 128 and allowing to be overwritten if + * needed. */ -#ifndef MAX_SATA_BLOCKS_READ -#define MAX_SATA_BLOCKS_READ 0x80 +#ifndef MAX_SATA_BLOCKS_READ_WRITE +#define MAX_SATA_BLOCKS_READ_WRITE 0x80 #endif static inline u32 ahci_port_base(u32 base, u32 port) @@ -464,8 +465,8 @@ static int ahci_port_start(u8 port) } -static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, - int buf_len) +static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf, + int buf_len, u8 is_write) { struct ahci_ioports *pp = &(probe_ent->port[port]); @@ -474,7 +475,7 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, u32 port_status; int sg_count; - debug("Enter get_ahci_device_data: for port %d\n", port); + debug("Enter %s: for port %d\n", __func__, port); if (port > probe_ent->n_ports) { printf("Invaild port number %d\n", port); @@ -490,7 +491,7 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len); sg_count = ahci_fill_sg(port, buf, buf_len); - opts = (fis_len >> 2) | (sg_count << 16); + opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6); ahci_fill_cmd_slot(pp, opts); writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); @@ -499,8 +500,7 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, printf("timeout exit!\n"); return -1; } - debug("get_ahci_device_data: %d byte transferred.\n", - pp->cmd_slot->status); + debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status); return 0; } @@ -570,8 +570,8 @@ static int ata_scsiop_inquiry(ccb *pccb) if (!(tmpid = malloc(sizeof(hd_driveid_t)))) return -ENOMEM; - if (get_ahci_device_data(port, (u8 *) & fis, 20, - tmpid, sizeof(hd_driveid_t))) { + if (ahci_device_data_io(port, (u8 *) &fis, 20, tmpid, + sizeof(hd_driveid_t), 0)) { debug("scsi_ahci: SCSI inquiry command failure.\n"); return -EIO; } @@ -590,9 +590,9 @@ static int ata_scsiop_inquiry(ccb *pccb) /* - * SCSI READ10 command operation. + * SCSI READ10/WRITE10 command operation. */ -static int ata_scsiop_read10(ccb * pccb) +static int ata_scsiop_read_write(ccb *pccb, u8 is_write) { u32 lba = 0; u16 blocks = 0; @@ -616,20 +616,21 @@ static int ata_scsiop_read10(ccb * pccb) */ blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); - debug("scsi_ahci: read %d blocks starting from lba 0x%x\n", - (unsigned)lba, blocks); + debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n", + is_write ? "write" : "read", (unsigned)lba, blocks); /* Preset the FIS */ memset(fis, 0, 20); fis[0] = 0x27; /* Host to device FIS. */ fis[1] = 1 << 7; /* Command FIS. */ - fis[2] = ATA_CMD_RD_DMA; /* Command byte. */ + /* Command byte (read/write). */ + fis[2] = is_write ? ATA_CMD_WR_DMA : ATA_CMD_RD_DMA; while (blocks) { u16 now_blocks; /* number of blocks per iteration */ u32 transfer_size; /* number of bytes per iteration */ - now_blocks = min(MAX_SATA_BLOCKS_READ, blocks); + now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks); transfer_size = ATA_BLOCKSIZE * now_blocks; if (transfer_size > user_buffer_size) { @@ -647,10 +648,12 @@ static int ata_scsiop_read10(ccb * pccb) fis[12] = (now_blocks >> 0) & 0xff; fis[13] = (now_blocks >> 8) & 0xff; - /* Read from ahci */ - if (get_ahci_device_data(pccb->target, (u8 *) &fis, sizeof(fis), - user_buffer, user_buffer_size)) { - debug("scsi_ahci: SCSI READ10 command failure.\n"); + /* Read/Write from ahci */ + if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis), + user_buffer, user_buffer_size, + is_write)) { + debug("scsi_ahci: SCSI %s10 command failure.\n", + is_write ? "WRITE" : "READ"); return -EIO; } user_buffer += transfer_size; @@ -703,7 +706,10 @@ int scsi_exec(ccb *pccb) switch (pccb->cmd[0]) { case SCSI_READ10: - ret = ata_scsiop_read10(pccb); + ret = ata_scsiop_read_write(pccb, 0); + break; + case SCSI_WRITE10: + ret = ata_scsiop_read_write(pccb, 1); break; case SCSI_RD_CAPAC: ret = ata_scsiop_read_capacity10(pccb);