From: Adam Ford Date: Fri, 28 Dec 2018 14:55:41 +0000 (-0600) Subject: ARM: DTS: imx6q-logicpd: Update DTS/DTSI files X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=b64b5ad11505b79fc9212fa04124addd34792f65;p=u-boot.git ARM: DTS: imx6q-logicpd: Update DTS/DTSI files The i.MX6 SOM and development kits have undergone significant updates and changes over the past few months. This re-sync's the U-Boot with Logic PD's BSP. Signed-off-by: Adam Ford --- diff --git a/arch/arm/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/dts/imx6-logicpd-baseboard.dtsi new file mode 100644 index 0000000000..303c09334b --- /dev/null +++ b/arch/arm/dts/imx6-logicpd-baseboard.dtsi @@ -0,0 +1,596 @@ +/* + * Copyright 2018 Logic PD, Inc. + * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + keyboard { + compatible = "gpio-keys"; + + btn0 { + gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>; + label = "btn0"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + btn1 { + gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>; + label = "btn1"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + btn2 { + gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>; + label = "btn2"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + btn3 { + gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>; + label = "btn3"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + }; + + leds { + compatible = "gpio-leds"; + + gen_led0 { + label = "led0"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led0>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + + gen_led1 { + label = "led1"; + gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>; + }; + + gen_led2 { + label = "led2"; + gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + gen_led3 { + label = "led3"; + gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + reg_usb_otg_vbus: regulator-otg-vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usbh1vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_3v3: regulator-3v3@2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_3v3>; + compatible = "regulator-fixed"; + regulator-name = "reg_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet: regulator-ethernet@3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_pwr>; + compatible = "regulator-fixed"; + regulator-name = "ethernet-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&sw4_reg>; + }; + + reg_audio: regulator-audio@4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_audio>; + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_hdmi: regulator-hdmi@5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_hdmi>; + compatible = "regulator-fixed"; + regulator-name = "hdmi-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + }; + + reg_uart3: regulator-uart3@6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_uart3>; + compatible = "regulator-fixed"; + regulator-name = "uart3-supply"; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_1v8: regulator-1v8@7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_1v8>; + compatible = "regulator-fixed"; + regulator-name = "1v8-supply"; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_pcie: regulator@8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + mipi_pwr: regulator@9 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_pwr>; + regulator-name = "mipi_pwr_en"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + phy-supply = <®_enet>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c3 { + ov5640: camera@10 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x10>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <&mipi_pwr>; + AVDD-supply = <&mipi_pwr>; + DVDD-supply = <&mipi_pwr>; + reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + + pcf8575: gpio@20 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf8574>; + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + lines-initial-states = <0x0710>; + wakeup-source; + }; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + status = "okay"; + vpcie-supply = <®_pcie>; + /* fsl,max-link-speed = <2>; */ +}; + +&ssi2 { + status = "okay"; +}; + +&iomuxc { + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_i2c1: i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_enet_pwr: enet_pwr { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + >; + }; + + pinctrl_mipi_pwr: pwr_mipi { + fsl,pins = ; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b1 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b1 + >; + }; + + pinctrl_reg_hdmi: reg_hdmi { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0xd17059 + MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17069 + >; + }; + + pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* ENET_INT */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1b0b0 /* ETHR_nRST */ + >; + }; + + pinctrl_reg_audio: audio-reg { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_pcie: pcie { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_pcf8574: pcf8575-pins { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* R_LCD_DCLK */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 /* R_LCD_HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 /* R_LCD_VSYNC */ + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 /* R_LCD_MDISP */ + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_uart3: uart3reg { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + >; + }; + + pinctrl_reg_3v3: reg-3v3 { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 + >; + }; + + pinctrl_reg_1v8: reg-1v8 { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + + pinctrl_led0: led0 { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/dts/imx6qdl-logicpd.dtsi b/arch/arm/dts/imx6-logicpd-som.dtsi similarity index 52% rename from arch/arm/dts/imx6qdl-logicpd.dtsi rename to arch/arm/dts/imx6-logicpd-som.dtsi index db1a63dcde..3fc50babf0 100644 --- a/arch/arm/dts/imx6qdl-logicpd.dtsi +++ b/arch/arm/dts/imx6-logicpd-som.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2016 Logic PD + * Copyright 2018 Logic PD * This file is adapted from imx6qdl-sabresd.dtsi. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. @@ -14,7 +14,6 @@ #include #include -#include "imx6q.dtsi" / { chosen { @@ -24,6 +23,16 @@ memory { reg = <0x10000000 0x80000000>; }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1837"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; /* Reroute power feeding the CPU to come from the external PMIC */ @@ -44,6 +53,13 @@ <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; + nand-on-flash-bbt; +}; + &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -78,7 +94,7 @@ regulator-max-microvolt = <3300000>; regulator-name = "gen_3v3"; regulator-boot-on; - regulator-always-on; + /* regulator-always-on; */ }; sw3a_reg: sw3a { @@ -98,12 +114,11 @@ }; sw4_reg: sw4 { - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "gen_rgmii"; }; - swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; @@ -161,9 +176,33 @@ regulator-max-microvolt = <2500000>; regulator-always-on; }; + + coin_reg: coin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; }; }; + temp_sense0: tmp102@4a { + compatible = "ti,tmp102"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + temp_sense1: tmp102@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + mfg_eeprom: at24@51 { compatible = "atmel,24c64"; pagesize = <32>; @@ -184,91 +223,46 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0 MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0 - MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0 - MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0 - MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0 - MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0 - MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0 - MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x1b0b0 - MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x80000000 - MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x80000000 - MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x80000000 - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x80000000 - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x80000000 - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000 - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000 - MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x80000000 - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 - MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x80000000 - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x80000000 - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x80000000 - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x80000000 - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 - MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x80000000 - MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x80000000 - MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x80000000 - MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x80000000 - MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x80000000 - MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x80000000 - MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x80000000 - MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x80000000 - MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x80000000 - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 - MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x80000000 - MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x80000000 - MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x80000000 - MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 - MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 - MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 - MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x80000000 - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 - MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x80000000 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 - MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 - MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x80000000 - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x80000000 - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 - MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000 - MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x80000000 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 - MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x80000000 - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 - MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x80000000 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000 - MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x80000000 - MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x80000000 - MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x80000000 - MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x80000000 - MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x80000000 - MX6QDL_PAD_RGMII_RD1__GPIO6_IO27 0x80000000 - MX6QDL_PAD_RGMII_RD2__GPIO6_IO28 0x80000000 - MX6QDL_PAD_RGMII_RD3__GPIO6_IO29 0x80000000 - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x80000000 - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 + MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 >; }; @@ -288,6 +282,7 @@ pinctrl_uart2: uart2grp { fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 @@ -297,30 +292,39 @@ pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WL_IRQ */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1f0b0 /* WLAN_EN */ - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1f0b0 /* BT_EN */ + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */ + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Temp Sense Alert */ >; }; }; +&snvs_poweroff { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -331,31 +335,39 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; + uart-has-rtscts; + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; }; &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + non-removable; keep-power-in-suspend; enable-sdio-wakeup; status = "okay"; + vmmc-supply = <&sw2_reg>; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; non-removable; + cap-power-off-card; keep-power-in-suspend; - enable-sdio-wakeup; - vmmc-supply = <&sw2_reg>; + wakeup-source; + vmmc-supply = <®_wl18xx_vmmc>; status = "okay"; #address-cells = <1>; #size-cells = <0>; - wlcore: wlcore@0 { + wlcore: wlcore@2 { compatible = "ti,wl1837"; reg = <2>; interrupt-parent = <&gpio7>; - interrupts = <1 GPIO_ACTIVE_HIGH>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/dts/imx6q-logicpd.dts b/arch/arm/dts/imx6q-logicpd.dts index d1e7a389d0..dcea784477 100644 --- a/arch/arm/dts/imx6q-logicpd.dts +++ b/arch/arm/dts/imx6q-logicpd.dts @@ -1,5 +1,5 @@ /* - * Copyright 2017 Logic PD, Inc. + * Copyright 2018 Logic PD, Inc. * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms @@ -42,149 +42,137 @@ */ /dts-v1/; - -#include "imx6qdl-logicpd.dtsi" +#include "imx6q.dtsi" +#include "imx6-logicpd-som.dtsi" +#include "imx6-logicpd-baseboard.dtsi" / { - model = "Logic PD i.MX6QDL SOM"; + model = "Logic PD i.MX6QD SOM-M3 (HDMI)"; compatible = "fsl,imx6q"; - reg_usb_otg_vbus: regulator-otg-vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - enable-active-high; + backlight: backlight_lvds { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 20000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_lcd>; }; - reg_usb_h1_vbus: regulator-usbh1vbus@1 { + reg_lcd: regulator-lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reg>; compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-name = "lcd_panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + vin-supply = <®_3v3>; + startup-delay-us = <500000>; }; - reg_3v3: regulator-3v3@2 { + lcd_reset: lcd_reset { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reset>; compatible = "regulator-fixed"; - regulator-name = "reg_3v3"; + regulator-name = "nLCD_RESET"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_lcd>; + }; + + panel-lvds0 { + compatible = "ampire,am800480b3tmqw"; + backlight = <&backlight>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; }; }; -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; +&hdmi { + ddc-i2c-bus = <&i2c3>; status = "okay"; }; -&usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; +&i2c1 { + ili_touch: ilitouch@26 { + compatible = "ili,ili2117a"; + reg = <0x26>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; + ili2117a,poll-period = <10>; + ili2117a,max-touch = <2>; + }; }; -&usbh2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh2>; - phy_type = "hsic"; - disable-over-current; - status = "okay"; +®_hdmi { + regulator-always-on; }; -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; +&ldb { status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rmii"; - phy-speed = <10>; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; +}; + +&pwm3 { status = "okay"; }; &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - no-1-8-v; - keep-power-in-suspend; - status = "okay"; }; &iomuxc { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 - MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* nINT */ - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 /* Ethernet Reset */ - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x130b0 - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x130b0 - MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x130b0 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 - >; - }; - pinctrl_uart3: uart3grp { + pinctrl_lcd_reg: lcdreg { fsl,pins = < - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ >; }; - pinctrl_usbh1: usbh1grp { + pinctrl_lcd_reset: lcdreset { fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* USB_H1_PWR_EN */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */ >; }; - pinctrl_usbh2: usbh2grp { + pinctrl_touchscreen: touchscreengrp { fsl,pins = < - MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x17030 - MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x13030 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 /* USB_OTG_PWR_EN */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */ >; }; }; + diff --git a/board/logicpd/imx6/MAINTAINERS b/board/logicpd/imx6/MAINTAINERS index 5db7d2cadd..20ec5918e4 100644 --- a/board/logicpd/imx6/MAINTAINERS +++ b/board/logicpd/imx6/MAINTAINERS @@ -4,3 +4,6 @@ S: Maintained F: board/logicpd/imx6/ F: include/configs/imx6_logic.h F: configs/imx6q_logic_defconfig +F: arch/arm/dts/imx6-logicpd-baseboard.dtsi +F: arch/arm/dts/imx6-logicpd-som.dtsi +F: arch/arm/dts/imx6q-logicpd.dts