From: Neha Malcom Francis Date: Wed, 15 Nov 2023 10:10:23 +0000 (+0530) Subject: arm: dts: k3-binman: Add support for FIT templates X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=b153bad0f14168d5fcc02ba6bf1a2cd98daba9b5;p=u-boot.git arm: dts: k3-binman: Add support for FIT templates Add templates for FIT images used extensively across K3 boards with most of the code common. This includes the FIT portions of: - tispl.bin - u-boot.img - sysfw.itb (in case of legacy boot flow) Signed-off-by: Neha Malcom Francis Reviewed-by: Simon Glass --- diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi index 3ab771ff44..c7513e1a5d 100644 --- a/arch/arm/dts/k3-binman.dtsi +++ b/arch/arm/dts/k3-binman.dtsi @@ -113,4 +113,331 @@ }; }; +&binman { + itb_template: template-5 { + fit { + description = "SYSFW and Config fragments"; + #address-cells = <1>; + images { + sysfw.bin { + description = "sysfw"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "sysfw.bin"; + }; + }; + board-cfg.bin { + description = "board-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&board_cfg>; + keyfile = "custMpk.pem"; + }; + board_cfg: board-cfg { + filename = "board-cfg.bin"; + type = "blob-ext"; + }; + + }; + pm-cfg.bin { + description = "pm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&pm_cfg>; + keyfile = "custMpk.pem"; + }; + pm_cfg: pm-cfg { + filename = "pm-cfg.bin"; + type = "blob-ext"; + }; + }; + rm-cfg.bin { + description = "rm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&rm_cfg>; + keyfile = "custMpk.pem"; + }; + rm_cfg: rm-cfg { + filename = "rm-cfg.bin"; + type = "blob-ext"; + }; + }; + sec-cfg.bin { + description = "sec-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + ti-secure { + content = <&sec_cfg>; + keyfile = "custMpk.pem"; + }; + sec_cfg: sec-cfg { + filename = "sec-cfg.bin"; + type = "blob-ext"; + }; + }; + }; + }; + }; + + itb_unsigned_template: template-6 { + fit { + description = "SYSFW and Config fragments"; + #address-cells = <1>; + images { + sysfw.bin { + description = "sysfw"; + type = "firmware"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "sysfw.bin_fs"; + }; + }; + board-cfg.bin { + description = "board-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + board-cfg { + filename = "board-cfg.bin"; + type = "blob-ext"; + }; + + }; + pm-cfg.bin { + description = "pm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + pm-cfg { + filename = "pm-cfg.bin"; + type = "blob-ext"; + }; + }; + rm-cfg.bin { + description = "rm-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + rm-cfg { + filename = "rm-cfg.bin"; + type = "blob-ext"; + }; + }; + sec-cfg.bin { + description = "sec-cfg"; + type = "firmware"; + arch = "arm"; + compression = "none"; + sec-cfg { + filename = "sec-cfg.bin"; + type = "blob-ext"; + }; + }; + }; + }; + }; +}; + +#else + +&binman { + ti_spl_template: template-1 { + filename = "tispl.bin"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = ; + entry = ; + ti-secure { + content = <&atf>; + keyfile = "custMpk.pem"; + }; + atf: atf-bl31 { + }; + }; + + tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + ti-secure { + content = <&tee>; + keyfile = "custMpk.pem"; + }; + tee: tee-os { + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = ; + entry = ; + ti-secure { + content = <&u_boot_spl_nodtb>; + keyfile = "custMpk.pem"; + + }; + u_boot_spl_nodtb: blob-ext { + filename = "spl/u-boot-spl-nodtb.bin"; + }; + }; + + }; + }; + }; + ti_spl_unsigned_template: template-2 { + filename = "tispl.bin_unsigned"; + pad-byte = <0xff>; + + fit { + description = "Configuration to load ATF and SPL"; + #address-cells = <1>; + + images { + + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = ; + entry = ; + atf-bl31 { + filename = "bl31.bin"; + }; + }; + + tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + tee-os { + filename = "tee-raw.bin"; + }; + }; + + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + }; + + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = ; + entry = ; + blob-ext { + filename = "spl/u-boot-spl-nodtb.bin"; + }; + }; + }; + }; + }; + u_boot_template: template-3 { + filename = "u-boot.img"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = ; + ti-secure { + content = <&u_boot_nodtb>; + keyfile = "custMpk.pem"; + }; + u_boot_nodtb: u-boot-nodtb { + }; + hash { + algo = "crc32"; + }; + }; + }; + }; + }; + u_boot_unsigned_template: template-4 { + filename = "u-boot.img_unsigned"; + pad-byte = <0xff>; + + fit { + description = "FIT image with multiple configurations"; + + images { + uboot { + type = "firmware"; + os = "u-boot"; + arch = "arm"; + compression = "none"; + load = ; + blob { + filename = "u-boot-nodtb.bin"; + }; + hash { + algo = "crc32"; + }; + }; + }; + }; + }; + +}; + #endif