From: Fabio Estevam <festevam@gmail.com>
Date: Fri, 19 Jul 2024 20:33:10 +0000 (-0300)
Subject: udoo-neo: Do not print devicetree model
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=b06a0b4781a87f61ccd4dc70cc9deab40c9ee456;p=u-boot.git

udoo-neo: Do not print devicetree model

The udoo_neo_defconfig target supports several board variants.
All of these variants use the imx6sx-udoo-neo-basic devicetree in U-Boot.

Currently, the devicetree model as well as the board variant name
are shown:

...
Model: UDOO Neo Basic
Board: UDOO Neo FULL
...

Printing the devicetree model that is used internally by U-Boot
may confuse users.

Unselect the CONFIG_DISPLAY_BOARDINFO option and move the board printing
inside board_init() so that only the real board name that is detected
in run-time is printed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---

diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c
index 1a0aaecc33..4cf214bf17 100644
--- a/board/udoo/neo/neo.c
+++ b/board/udoo/neo/neo.c
@@ -136,8 +136,25 @@ static int setup_fec(void)
 	return enable_fec_anatop_clock(0, ENET_25MHZ);
 }
 
+static char *board_string(int type)
+{
+	switch (type) {
+	case UDOO_NEO_TYPE_BASIC:
+		return "BASIC";
+	case UDOO_NEO_TYPE_BASIC_KS:
+		return "BASICKS";
+	case UDOO_NEO_TYPE_FULL:
+		return "FULL";
+	case UDOO_NEO_TYPE_EXTENDED:
+		return "EXTENDED";
+	}
+	return "UNDEFINED";
+}
+
 int board_init(void)
 {
+	int *board_type = (int *)OCRAM_START;
+
 	/* Address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
@@ -149,6 +166,8 @@ int board_init(void)
 	gpio_request(IMX_GPIO_NR(4, 16), "ncp692");
 	gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
 
+	printf("Board: UDOO Neo %s\n", board_string(*board_type));
+
 	setup_fec();
 
 	return 0;
@@ -179,30 +198,6 @@ int board_mmc_init(struct bd_info *bis)
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
 
-static char *board_string(int type)
-{
-	switch (type) {
-	case UDOO_NEO_TYPE_BASIC:
-		return "BASIC";
-	case UDOO_NEO_TYPE_BASIC_KS:
-		return "BASICKS";
-	case UDOO_NEO_TYPE_FULL:
-		return "FULL";
-	case UDOO_NEO_TYPE_EXTENDED:
-		return "EXTENDED";
-	}
-	return "UNDEFINED";
-}
-
-/* Override the default implementation, DT model is not accurate */
-int checkboard(void)
-{
-	int *board_type = (int *)OCRAM_START;
-
-	printf("Board: UDOO Neo %s\n", board_string(*board_type));
-	return 0;
-}
-
 int board_late_init(void)
 {
 	int *board_type = (int *)OCRAM_START;
diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index 97e3b37983..826d5a1150 100644
--- a/configs/udoo_neo_defconfig
+++ b/configs/udoo_neo_defconfig
@@ -25,6 +25,7 @@ CONFIG_BOARD_SIZE_LIMIT=523264
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
 CONFIG_SYS_PBSIZE=532
+# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_EXT4=y