From: Albert ARIBAUD Date: Mon, 13 Jan 2014 20:06:16 +0000 (+0100) Subject: mini2440: remove board support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=af5b9b1f789d600cf0d996f1a5e80eb8b38f4264;p=u-boot.git mini2440: remove board support Signed-off-by: Albert ARIBAUD Acked-by: Minkyu Kang --- diff --git a/board/friendlyarm/mini2440/Makefile b/board/friendlyarm/mini2440/Makefile deleted file mode 100644 index f3671071b5..0000000000 --- a/board/friendlyarm/mini2440/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2012 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mini2440.o diff --git a/board/friendlyarm/mini2440/mini2440.c b/board/friendlyarm/mini2440/mini2440.c deleted file mode 100644 index 59ed0548e7..0000000000 --- a/board/friendlyarm/mini2440/mini2440.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, - * - * (C) Copyright 2009 - * Michel Pollet - * - * (C) Copyright 2012 - * Gabriel Huau - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include "mini2440.h" - -DECLARE_GLOBAL_DATA_PTR; - -static inline void pll_delay(unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b" : "=r" (loops) : "0" (loops)); -} - -int board_early_init_f(void) -{ - struct s3c24x0_clock_power * const clk_power = - s3c24x0_get_base_clock_power(); - - /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */ - clk_power->clkdivn = CLKDIVN_VAL; - - /* configure UPLL */ - clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); - /* some delay between MPLL and UPLL */ - pll_delay(100); - - /* configure MPLL */ - clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); - - /* some delay between MPLL and UPLL */ - pll_delay(10000); - - return 0; -} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - - /* IOMUX Port H : UART Configuration */ - gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 | - IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2; - - gpio_direction_output(GPH8, 0); - gpio_direction_output(GPH9, 0); - gpio_direction_output(GPH10, 0); - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR; - - return 0; -} - -int dram_init(void) -{ - struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl(); - - /* - * Configuring bus width and timing - * Initialize clocks for each bank 0..5 - * Bank 3 and 4 are used for DM9000 - */ - writel(BANK_CONF, &memctl->bwscon); - writel(B0_CONF, &memctl->bankcon[0]); - writel(B1_CONF, &memctl->bankcon[1]); - writel(B2_CONF, &memctl->bankcon[2]); - writel(B3_CONF, &memctl->bankcon[3]); - writel(B4_CONF, &memctl->bankcon[4]); - writel(B5_CONF, &memctl->bankcon[5]); - - /* Bank 6 and 7 are used for DRAM */ - writel(SDRAM_64MB, &memctl->bankcon[6]); - writel(SDRAM_64MB, &memctl->bankcon[7]); - - writel(MEM_TIMING, &memctl->refresh); - writel(BANKSIZE_CONF, &memctl->banksize); - writel(B6_MRSR, &memctl->mrsrb6); - writel(B7_MRSR, &memctl->mrsrb7); - - gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ -#ifdef CONFIG_DRIVER_DM9000 - return dm9000_initialize(bis); -#else - return 0; -#endif -} diff --git a/board/friendlyarm/mini2440/mini2440.h b/board/friendlyarm/mini2440/mini2440.h deleted file mode 100644 index db386eac01..0000000000 --- a/board/friendlyarm/mini2440/mini2440.h +++ /dev/null @@ -1,144 +0,0 @@ -#ifndef __MINI2440_BOARD_CONF_H__ -#define __MINI2440_BOARD_CONF_H__ - -/* PLL Parameters */ -#define CLKDIVN_VAL 7 -#define M_MDIV 0x7f -#define M_PDIV 0x2 -#define M_SDIV 0x1 - -#define U_M_MDIV 0x38 -#define U_M_PDIV 0x2 -#define U_M_SDIV 0x2 - -/* BWSCON */ -#define DW8 0x0 -#define DW16 0x1 -#define DW32 0x2 -#define WAIT (0x1<<2) -#define UBLB (0x1<<3) - -#define B1_BWSCON (DW32) -#define B2_BWSCON (DW16) -#define B3_BWSCON (DW16 + WAIT + UBLB) -#define B4_BWSCON (DW16 + WAIT + UBLB) -#define B5_BWSCON (DW16) -#define B6_BWSCON (DW32) -#define B7_BWSCON (DW32) - -/* - * Bank Configuration - */ -#define B0_Tacs 0x0 /* 0clk */ -#define B0_Tcos 0x0 /* 0clk */ -#define B0_Tacc 0x7 /* 14clk */ -#define B0_Tcoh 0x0 /* 0clk */ -#define B0_Tah 0x0 /* 0clk */ -#define B0_Tacp 0x0 /* 0clk */ -#define B0_PMC 0x0 /* normal */ - -#define B1_Tacs 0x0 -#define B1_Tcos 0x0 -#define B1_Tacc 0x7 -#define B1_Tcoh 0x0 -#define B1_Tah 0x0 -#define B1_Tacp 0x0 -#define B1_PMC 0x0 - -#define B2_Tacs 0x0 -#define B2_Tcos 0x0 -#define B2_Tacc 0x7 -#define B2_Tcoh 0x0 -#define B2_Tah 0x0 -#define B2_Tacp 0x0 -#define B2_PMC 0x0 - -#define B3_Tacs 0x0 -#define B3_Tcos 0x3 /* 4clk */ -#define B3_Tacc 0x7 -#define B3_Tcoh 0x1 /* 1clk */ -#define B3_Tah 0x3 /* 4clk */ -#define B3_Tacp 0x0 -#define B3_PMC 0x0 - -#define B4_Tacs 0x0 -#define B4_Tcos 0x3 -#define B4_Tacc 0x7 -#define B4_Tcoh 0x1 -#define B4_Tah 0x3 -#define B4_Tacp 0x0 -#define B4_PMC 0x0 - -#define B5_Tacs 0x0 -#define B5_Tcos 0x0 -#define B5_Tacc 0x7 -#define B5_Tcoh 0x0 -#define B5_Tah 0x0 -#define B5_Tacp 0x0 -#define B5_PMC 0x0 - -/* - * SDRAM Configuration - */ -#define SDRAM_MT 0x3 /* SDRAM */ -#define SDRAM_Trcd 0x0 /* 2clk */ -#define SDRAM_SCAN_9 0x1 /* 9bit */ -#define SDRAM_SCAN_10 0x2 /* 10bit */ - -#define SDRAM_64MB ((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9)) - -/* - * Refresh Parameter - */ -#define REFEN 0x1 /* Refresh enable */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -#define Trp 0x1 /* 3clk */ -#define Trc 0x3 /* 7clk */ -#define Tchr 0x0 /* unused */ -#define REFCNT 1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */ - -/* - * MRSR Parameter - */ -#define BL 0x0 -#define BT 0x0 -#define CL 0x3 /* 3 clocks */ -#define TM 0x0 -#define WBL 0x0 - -/* - * BankSize Parameter - */ -#define BK76MAP 0x2 /* 128MB/128MB */ -#define SCLK_EN 0x1 /* SCLK active */ -#define SCKE_EN 0x1 /* SDRAM power down mode enable */ -#define BURST_EN 0x1 /* Burst enable */ - -/* - * Register values - */ -#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \ - (B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \ - (B7_BWSCON<<28))) - -#define B0_CONF ((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \ - (B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC)) -#define B1_CONF ((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \ - (B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC)) -#define B2_CONF ((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \ - (B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC)) -#define B3_CONF ((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \ - (B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC)) -#define B4_CONF ((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \ - (B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC)) -#define B5_CONF ((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \ - (B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC)) - -#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \ - (Trc<<18) + (Tchr<<16) + REFCNT - -#define BANKSIZE_CONF (BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7) -#define B6_MRSR (CL<<4) -#define B7_MRSR (CL<<4) - -#endif diff --git a/boards.cfg b/boards.cfg index d177f8227c..af739347e7 100644 --- a/boards.cfg +++ b/boards.cfg @@ -69,7 +69,6 @@ Active arm arm920t imx - - Active arm arm920t imx - - scb9328 - Torsten Koschorrek Active arm arm920t ks8695 - - cm4008 - Greg Ungerer Active arm arm920t ks8695 - - cm41xx - - -Active arm arm920t s3c24x0 friendlyarm mini2440 mini2440 - Gabriel Huau Active arm arm920t s3c24x0 mpl vcma9 VCMA9 - David Müller Active arm arm920t s3c24x0 samsung - smdk2410 - David Müller Active arm arm926ejs - armltd integrator integratorap_cm926ejs integratorap:CM926EJ_S Linus Walleij diff --git a/doc/README.mini2440 b/doc/README.mini2440 deleted file mode 100644 index 311ca52862..0000000000 --- a/doc/README.mini2440 +++ /dev/null @@ -1,28 +0,0 @@ -U-Boot for FriendlyARM Mini2440 (s3c2440) - -This file contains information for the port of U-Boot to FriendlyARM -mini2440 - -All information about the board can be found on : -http://www.friendlyarm.net/products/mini2440 - -To build u-boot : ./MAKEALL mini2440 - -Overview : --------- -FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 -ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9 -systems. It's a low cost board. - -Boot Methods : ------------- -Mini2440 can boot from NOR or NAND. - -Build : ------ -./MAKEALL mini2440 - -or - -make mini2440_config -make diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 604de0c8a7..be3e97eebd 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,8 +11,9 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -omap730p2 arm arm926ejs - 2013-11-11 -pn62 powerpc mpc824x - 2013-11-11 Wolfgang Grandegger +mini2440 arm arm920t - 2014-01-13 Gabriel Huau +omap730p2 arm arm926ejs 79c5c08d 2013-11-11 +pn62 powerpc mpc824x 649acfe1 2013-11-11 Wolfgang Grandegger pdnb3 arm ixp 304db0b 2013-09-24 Stefan Roese scpu arm ixp 304db0b 2013-09-24 Stefan Roese omap1510inn arm arm925t 0610a16 2013-09-23 Kshitij Gupta