From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 17 May 2020 16:24:19 +0000 (+0200)
Subject: net: pcnet: Wrap devbusfn into private data
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=ab6ecbdc3c25761756538129c26d1396dd5b02a9;p=u-boot.git

net: pcnet: Wrap devbusfn into private data

Instead of using eth_device priv for this PCI devbusfn, free it
so it could be used for driver private data, and wrap devbusfn
into those driver private data.

Note that using the name dev for the variable is a trick left for
later, when DM support is in place, so dm_pci_virt_to_mem() can be
used with minimal ifdeffery.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
index d8249f0a1c..f7f1b8fc21 100644
--- a/drivers/net/pcnet.c
+++ b/drivers/net/pcnet.c
@@ -82,6 +82,7 @@ struct pcnet_priv {
 	/* Receive Buffer space */
 	unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
 	struct pcnet_uncached_priv *uc;
+	pci_dev_t dev;
 	int cur_rx;
 	int cur_tx;
 };
@@ -141,13 +142,11 @@ static int pcnet_check(struct eth_device *dev)
 	return readw(base + PCNET_RAP) == 88;
 }
 
-static inline pci_addr_t pcnet_virt_to_mem(const struct eth_device *dev,
-						void *addr)
+static inline pci_addr_t pcnet_virt_to_mem(struct pcnet_priv *lp, void *addr)
 {
-	pci_dev_t devbusfn = (pci_dev_t)(unsigned long)dev->priv;
 	void *virt_addr = addr;
 
-	return pci_virt_to_mem(devbusfn, virt_addr);
+	return pci_virt_to_mem(lp->dev, virt_addr);
 }
 
 static struct pci_device_id supported[] = {
@@ -258,7 +257,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
 	 */
 	lp->cur_rx = 0;
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		addr = pcnet_virt_to_mem(dev, lp->rx_buf[i]);
+		addr = pcnet_virt_to_mem(lp, lp->rx_buf[i]);
 		uc->rx_ring[i].base = cpu_to_le32(addr);
 		uc->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
 		uc->rx_ring[i].status = cpu_to_le16(0x8000);
@@ -290,9 +289,9 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
 
 	uc->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
 					       RX_RING_LEN_BITS);
-	addr = pcnet_virt_to_mem(dev, uc->rx_ring);
+	addr = pcnet_virt_to_mem(lp, uc->rx_ring);
 	uc->init_block.rx_ring = cpu_to_le32(addr);
-	addr = pcnet_virt_to_mem(dev, uc->tx_ring);
+	addr = pcnet_virt_to_mem(lp, uc->tx_ring);
 	uc->init_block.tx_ring = cpu_to_le32(addr);
 
 	PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
@@ -303,7 +302,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
 	 * Tell the controller where the Init Block is located.
 	 */
 	barrier();
-	addr = pcnet_virt_to_mem(dev, &lp->uc->init_block);
+	addr = pcnet_virt_to_mem(lp, &lp->uc->init_block);
 	pcnet_write_csr(dev, 1, addr & 0xffff);
 	pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
 
@@ -361,7 +360,7 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
 	 * Setup Tx ring. Caution: the write order is important here,
 	 * set the status with the "ownership" bits last.
 	 */
-	addr = pcnet_virt_to_mem(dev, packet);
+	addr = pcnet_virt_to_mem(lp, packet);
 	writew(-pkt_len, &entry->length);
 	writel(0, &entry->misc);
 	writel(addr, &entry->base);
@@ -492,7 +491,7 @@ int pcnet_initialize(bd_t *bis)
 					   (unsigned long)lp + sizeof(*lp));
 		}
 
-		dev->priv = (void *)(unsigned long)devbusfn;
+		lp->dev = devbusfn;
 		sprintf(dev->name, "pcnet#%d", dev_nr);
 
 		/*