From: Samuel Holland Date: Fri, 15 Jul 2022 04:09:19 +0000 (-0500) Subject: sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=a35628ec33a12032b82cc7be58f8b41c7ab0a4b2;p=u-boot.git sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig This option is used only by the phy-sun4i-usb driver, which does not inherently depend on the ARM architecture. Signed-off-by: Samuel Holland Reviewed-by: Jagan Teki Signed-off-by: Andre Przywara --- diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index f4925aaa89..5712576184 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -679,15 +679,6 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. -config INITIAL_USB_SCAN_DELAY - int "delay initial usb scan by x ms to allow builtin devices to init" - default 0 - ---help--- - Some boards have on board usb devices which need longer than the - USB spec's 1 second to connect from board powerup. Set this config - option to a non 0 value to add an extra delay before the first usb - bus scan. - config USB0_VBUS_PIN string "Vbus enable pin for usb0 (otg)" default "" diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig index d3ff82f73a..f8f1e99c4f 100644 --- a/drivers/phy/allwinner/Kconfig +++ b/drivers/phy/allwinner/Kconfig @@ -13,6 +13,16 @@ config PHY_SUN4I_USB This driver controls the entire USB PHY block, both the USB OTG parts, as well as the 2 regular USB 2 host PHYs. +config INITIAL_USB_SCAN_DELAY + int "Delay initial USB scan by x ms to allow builtin devices to init" + depends on PHY_SUN4I_USB + default 0 + help + Some boards have on board usb devices which need longer than + the USB spec's 1 second to connect from board powerup. Set + this option to a nonzero value to add an extra delay before + the first USB bus scan. + config PHY_SUN50I_USB3 bool "Allwinner sun50i USB3 PHY driver" depends on ARCH_SUNXI