From: Nishanth Menon <nm@ti.com>
Date: Fri, 25 Aug 2023 18:03:04 +0000 (-0500)
Subject: board: ti: am62x: Add am62x_beagleplay_* defconfigs and env file
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=a200f428b5b2183c1bf9c7519569aa61faa990d7;p=u-boot.git

board: ti: am62x: Add am62x_beagleplay_* defconfigs and env file

Add defconfig fragments for am625 based beagleplay and corresponding
customized environment file for beagleplay.

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/board/ti/am62x/beagleplay.env b/board/ti/am62x/beagleplay.env
new file mode 100644
index 0000000000..4f0a94a811
--- /dev/null
+++ b/board/ti/am62x/beagleplay.env
@@ -0,0 +1,19 @@
+#include <env/ti/ti_common.env>
+#include <env/ti/default_findfdt.env>
+#include <env/ti/mmc.env>
+
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+set_led_state_fail_load= led led-0 off; led led-1 on;
+	led led-2 off; led led-3 on; led led-4 off
+set_led_state_start_load=led led-0 on; led led-1 off;
+	led led-2 on; led led-3 off; led led-4 on
+boot=mmc
+mmcdev=1
+bootpart=1:1
+bootdir=/boot
+boot_targets=mmc1 mmc0 usb pxe
+bootmeths=script extlinux efi pxe
+rd_spec=-
diff --git a/board/ti/am62x/beagleplay_a53.config b/board/ti/am62x/beagleplay_a53.config
new file mode 100644
index 0000000000..f0380416cc
--- /dev/null
+++ b/board/ti/am62x/beagleplay_a53.config
@@ -0,0 +1,55 @@
+# Defconfig fragment to apply on top of am62x_evm_a53_defconfig
+
+CONFIG_DEFAULT_DEVICE_TREE="k3-am625-beagleplay"
+CONFIG_OF_LIST="k3-am625-beagleplay"
+CONFIG_SPL_OF_LIST="k3-am625-beagleplay"
+CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load"
+CONFIG_EXT4_WRITE=y
+CONFIG_LZO=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
+CONFIG_AUTOBOOT_DELAY_STR="d"
+CONFIG_AUTOBOOT_STOP_STR=" "
+# Use the Beagleplay env file
+CONFIG_ENV_SOURCE_FILE="beagleplay"
+# Do not use emmc boot - we will use FS only
+CONFIG_SUPPORT_EMMC_BOOT=n
+CONFIG_MMC_IO_VOLTAGE=y
+# CONFIG_SPL_MMC_IO_VOLTAGE is not set
+CONFIG_MMC_UHS_SUPPORT=y
+# CONFIG_SPL_MMC_UHS_SUPPORT is not set
+CONFIG_MMC_HS200_SUPPORT=y
+# CONFIG_SPL_MMC_HS200_SUPPORT is not set
+# Enable GPIO control
+CONFIG_DM_GPIO=y
+CONFIG_SPL_GPIO=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPIO_READ=y
+# Enable LEDs
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_SPL_LED=y
+CONFIG_SPL_LED_GPIO=y
+# Enable I2C bus
+CONFIG_SPL_I2C=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_CMD_I2C=y
+# Regulator
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_DM_REGULATOR_TPS65219=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_TPS65219=y
+CONFIG_CMD_PMIC=y
+# Uses Realtek phy rather than TI phy
+CONFIG_PHY_TI_DP83867=n
+CONFIG_PHY_REALTEK=y
+# No SPI flash on Beagleplay
+CONFIG_SPI=n
+CONFIG_SPI_FLASH=n
+CONFIG_SPL_DM_SPI_FLASH=n
+CONFIG_SPL_SPI_FLASH_SUPPORT=n
diff --git a/board/ti/am62x/beagleplay_r5.config b/board/ti/am62x/beagleplay_r5.config
new file mode 100644
index 0000000000..4ee0375a2a
--- /dev/null
+++ b/board/ti/am62x/beagleplay_r5.config
@@ -0,0 +1,15 @@
+# Defconfig fragment to apply on top of:
+# am62x_evm_r5_defconfig
+#
+CONFIG_DEFAULT_DEVICE_TREE="k3-am625-r5-beagleplay"
+CONFIG_OF_LIST="k3-am625-r5-beagleplay"
+CONFIG_SPL_OF_LIST="k3-am625-r5-beagleplay"
+# Do spl board init
+CONFIG_SPL_BOARD_INIT=y
+# Do not use emmc boot - we will use FS only
+CONFIG_SUPPORT_EMMC_BOOT=n
+# No SPI flash on Beagleplay
+CONFIG_SPI=n
+CONFIG_SPI_FLASH=n
+CONFIG_SPL_DM_SPI_FLASH=n
+CONFIG_SPL_SPI_FLASH_SUPPORT=n