From: Victor Gallardo Date: Tue, 9 Sep 2008 22:13:29 +0000 (-0700) Subject: ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=9ebbb54f7a25055010fa6668eba40c72a4c4f985;p=u-boot.git ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands and glacier. Signed-off-by: Victor Gallardo --- diff --git a/README b/README index b5e40862b9..44b450c6e2 100644 --- a/README +++ b/README @@ -1392,6 +1392,12 @@ The following options need to be configured: If defined, then this indicates the I2C bus number for the DTT. If not defined, then U-Boot assumes that DTT is on I2C bus 0. + CFG_I2C_DTT_ADDR: + + If defined, specifies the I2C address of the DTT device. + If not defined, then U-Boot uses predefined value for + specified DTT device. + CONFIG_FSL_I2C Define this option if you want to use Freescale's I2C driver in diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 8051cb228c..67a18f68d6 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -38,7 +38,11 @@ /* * Device code */ +#if defined(CFG_I2C_DTT_ADDR) +#define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR +#else #define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */ +#endif #define DTT_READ_TEMP 0x0 #define DTT_CONFIG 0x1 #define DTT_TEMP_HYST 0x2