From: Hector Martin Date: Sun, 29 Oct 2023 06:37:41 +0000 (+0900) Subject: usb: xhci: Recover from halted bulk endpoints X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=9d88bd4dcf1628bf129163eb5a25c48068423601;p=u-boot.git usb: xhci: Recover from halted bulk endpoints There is currently no codepath to recover from this case. In principle we could require that the upper layer do this explicitly, but let's just do it in xHCI when the next bulk transfer is started, since that reasonably implies whatever caused the problem has been dealt with. Signed-off-by: Hector Martin Reviewed-by: Marek Vasut --- diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e02a6e300c..db8b8f2002 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -671,6 +671,14 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe, ep_ctx = xhci_get_ep_ctx(ctrl, virt_dev->out_ctx, ep_index); + /* + * If the endpoint was halted due to a prior error, resume it before + * the next transfer. It is the responsibility of the upper layer to + * have dealt with whatever caused the error. + */ + if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == EP_STATE_HALTED) + reset_ep(udev, ep_index); + ring = virt_dev->eps[ep_index].ring; /* * How much data is (potentially) left before the 64KB boundary?