From: Simon Glass Date: Tue, 26 Sep 2023 14:14:17 +0000 (-0600) Subject: spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDR X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=9cbdc3a0fca805bb1fd9ccf85114c504860814b9;p=u-boot.git spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDR Rename this so that SPL is first, as per U-Boot convention. Also add PAYLOAD_ since this is where in memory the parameters for the payload have been stored. Signed-off-by: Simon Glass --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon index b3c6693a42..2bbe4e2d12 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon @@ -30,7 +30,7 @@ to understand the device tree in FIT image should be the one actually used, or leave it absent to favor the stored sectors. It is easier to deploy the FIT image with embedded static device tree to multiple boards. -Macro CONFIG_SYS_SPL_ARGS_ADDR serves two purposes. One is the pointer to load +Macro CONFIG_SPL_PAYLOAD_ARGS_ADDR serves two purposes. One is the pointer to load the stored sectors to. Normally this is the static device tree. The second purpose is the memory location of signature header for secure boot. After the FIT image is loaded into memory, it is validated against the signature header diff --git a/common/spl/Kconfig b/common/spl/Kconfig index b9d96fbe13..4632359794 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1063,7 +1063,7 @@ config SPL_OS_BOOT Enable booting directly to an OS from SPL. for more info read doc/README.falcon -config SYS_SPL_ARGS_ADDR +config SPL_PAYLOAD_ARGS_ADDR hex "Address in memory to load 'args' file for Falcon Mode to" depends on SPL_OS_BOOT default 0x88000000 if ARCH_OMAP2PLUS diff --git a/common/spl/spl.c b/common/spl/spl.c index 5c0cf9a2e0..0f45336551 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -814,8 +814,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2) } memset(&spl_image, '\0', sizeof(spl_image)); -#ifdef CONFIG_SYS_SPL_ARGS_ADDR - spl_image.arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; +#ifdef CONFIG_SPL_PAYLOAD_ARGS_ADDR + spl_image.arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; #endif spl_image.boot_device = BOOT_DEVICE_NONE; board_boot_order(spl_boot_list); @@ -873,8 +873,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2) #if CONFIG_IS_ENABLED(OS_BOOT) case IH_OS_LINUX: debug("Jumping to Linux\n"); -#if defined(CONFIG_SYS_SPL_ARGS_ADDR) - spl_fixup_fdt((void *)CONFIG_SYS_SPL_ARGS_ADDR); +#if defined(CONFIG_SPL_PAYLOAD_ARGS_ADDR) + spl_fixup_fdt((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); #endif spl_board_prepare_for_linux(); jump_to_image_linux(&spl_image); diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c index 2bf3434439..902564a607 100644 --- a/common/spl/spl_ext.c +++ b/common/spl/spl_ext.c @@ -97,7 +97,7 @@ int spl_load_image_ext_os(struct spl_image_info *spl_image, puts("spl: ext4fs_open failed\n"); goto defaults; } - err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen); + err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen); if (err < 0) { printf("spl: error reading image %s, err - %d, falling back to default\n", file, err); @@ -127,7 +127,7 @@ defaults: if (err < 0) puts("spl: ext4fs_open failed\n"); - err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen); + err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen); if (err < 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: error reading image %s, err - %d\n", diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c index f8a5b80a3b..c6e2526ade 100644 --- a/common/spl/spl_fat.c +++ b/common/spl/spl_fat.c @@ -128,7 +128,7 @@ int spl_load_image_fat_os(struct spl_image_info *spl_image, #if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT) file = env_get("falcon_args_file"); if (file) { - err = file_fat_read(file, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); + err = file_fat_read(file, (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0); if (err <= 0) { printf("spl: error reading image %s, err - %d, falling back to default\n", file, err); @@ -153,7 +153,7 @@ defaults: #endif err = file_fat_read(CONFIG_SPL_FS_LOAD_ARGS_NAME, - (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0); if (err <= 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: error reading image %s, err - %d\n", diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 20f687e138..0ab85d2168 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -235,7 +235,7 @@ static int mmc_load_image_raw_os(struct spl_image_info *spl_image, count = blk_dread(mmc_get_blk_desc(mmc), CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS, - (void *) CONFIG_SYS_SPL_ARGS_ADDR); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); if (count != CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("mmc_load_image_raw_os: mmc block read error\n"); diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c index dc45204fc0..6cc34004f4 100644 --- a/common/spl/spl_nand.c +++ b/common/spl/spl_nand.c @@ -159,11 +159,11 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, CONFIG_CMD_SPL_WRITE_SIZE, (void *)CONFIG_TEXT_BASE); /* copy to destintion */ - for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR, - src = (int *)CONFIG_TEXT_BASE; - src < (int *)(CONFIG_TEXT_BASE + - CONFIG_CMD_SPL_WRITE_SIZE); - src++, dst++) { + for (dst = (int *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, + src = (int *)CONFIG_TEXT_BASE; + src < (int *)(CONFIG_TEXT_BASE + + CONFIG_CMD_SPL_WRITE_SIZE); + src++, dst++) { writel(readl(src), dst); } diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c index 5b65b96a77..79d4f1d7aa 100644 --- a/common/spl/spl_nor.c +++ b/common/spl/spl_nor.c @@ -54,8 +54,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, CONFIG_SYS_OS_BASE, (void *)header); -#if defined CONFIG_SYS_SPL_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS - memcpy((void *)CONFIG_SYS_SPL_ARGS_ADDR, +#if defined CONFIG_SPL_PAYLOAD_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS + memcpy((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, (void *)CONFIG_CMD_SPL_NOR_OFS, CONFIG_CMD_SPL_WRITE_SIZE); #endif @@ -74,8 +74,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, (void *)(CONFIG_SYS_OS_BASE + sizeof(struct legacy_img_hdr)), spl_image->size); -#ifdef CONFIG_SYS_SPL_ARGS_ADDR - spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; +#ifdef CONFIG_SPL_PAYLOAD_ARGS_ADDR + spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; #endif return 0; diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index 2aff025f76..d69069a75b 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -47,7 +47,7 @@ static int spi_load_image_os(struct spl_image_info *spl_image, /* Read device tree. */ spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS, CFG_SYS_SPI_ARGS_SIZE, - (void *)CONFIG_SYS_SPL_ARGS_ADDR); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); return 0; } diff --git a/common/spl/spl_ubi.c b/common/spl/spl_ubi.c index bcac25cd02..d7ab9efd11 100644 --- a/common/spl/spl_ubi.c +++ b/common/spl/spl_ubi.c @@ -50,7 +50,7 @@ int spl_ubi_load_image(struct spl_image_info *spl_image, volumes[0].vol_id = CONFIG_SPL_UBI_LOAD_KERNEL_ID; volumes[0].load_addr = (void *)CONFIG_SYS_LOAD_ADDR; volumes[1].vol_id = CONFIG_SPL_UBI_LOAD_ARGS_ID; - volumes[1].load_addr = (void *)CONFIG_SYS_SPL_ARGS_ADDR; + volumes[1].load_addr = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; ret = ubispl_load_volumes(&info, volumes, 2); if (!ret) { diff --git a/common/spl/spl_xip.c b/common/spl/spl_xip.c index 77c23ba059..959915ffa6 100644 --- a/common/spl/spl_xip.c +++ b/common/spl/spl_xip.c @@ -14,7 +14,7 @@ static int spl_xip(struct spl_image_info *spl_image, { #if CONFIG_IS_ENABLED(OS_BOOT) if (!spl_start_uboot()) { - spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; + spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; spl_image->name = "Linux"; spl_image->os = IH_OS_LINUX; spl_image->load_addr = CONFIG_SYS_LOAD_ADDR; diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 06a3ec785d..0a83ac9378 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -32,7 +32,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x2a0000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 1431e54dc9..ef16da176a 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -28,7 +28,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80000100 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80000100 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x500 diff --git a/configs/display5_defconfig b/configs/display5_defconfig index 496fd4adba..24f22f0b03 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -45,7 +45,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SAVEENV=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index fbec341d89..19b1898373 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -40,7 +40,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index cf70dd9d35..08afc7fb9c 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -49,7 +49,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 453662cbf9..3f0cb19d15 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -50,7 +50,7 @@ CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x1200000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig index a6dce15c3a..993bbe29c6 100644 --- a/configs/igep00x0_defconfig +++ b/configs/igep00x0_defconfig @@ -43,7 +43,7 @@ CONFIG_SPL_UBI_LOAD_KERNEL_ID=3 CONFIG_SPL_UBI_LOAD_ARGS_ID=4 CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index cef7352ad8..c1b0487f7e 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -51,7 +51,7 @@ CONFIG_SPL_DMA=y CONFIG_SPL_MMC_TINY=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x44000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x44000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x400 diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig index 933a9d83f3..35ded27c83 100644 --- a/configs/imx6dl_mamoj_defconfig +++ b/configs/imx6dl_mamoj_defconfig @@ -20,7 +20,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 8be0cf7cc5..5ee1f5d255 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -35,7 +35,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x500000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index 2089df3286..46be3b69c8 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -35,7 +35,7 @@ CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 9d1d3bcc31..c71e87efab 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -38,7 +38,7 @@ CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index a33a5d7568..83d5e19382 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -32,7 +32,7 @@ CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index 78f1185ec6..84bd1b1d0f 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -61,7 +61,7 @@ CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x90000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x90000000 CONFIG_SYS_OS_BASE=0x40980000 CONFIG_SPL_WATCHDOG=y CONFIG_SPL_TARGET="spl/u-boot-spl.pbl" diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 88a72b3929..5e8fbd01bf 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -29,7 +29,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_OS_BASE=0x8180000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig index 4a4b79ae10..539b0cfa4f 100644 --- a/configs/omap35_logic_defconfig +++ b/configs/omap35_logic_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index 3893a83ce9..f14ce3d23d 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -37,7 +37,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index e31d5aac45..7d3d602c9d 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -35,7 +35,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index 2a9f20478e..0141a425e0 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -37,7 +37,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index f8bc8c6396..6ab405d7f9 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -35,7 +35,7 @@ CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_FS_LOAD_ARGS_NAME="imx6dl-riotboard.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig index 6f2f5ec360..3864e21a18 100644 --- a/configs/stm32746g-eval_spl_defconfig +++ b/configs/stm32746g-eval_spl_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_SYS_PBSIZE=1050 diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig index 1b8b5a17b7..b2a786121c 100644 --- a/configs/stm32f746-disco_spl_defconfig +++ b/configs/stm32f746-disco_spl_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_SYS_PBSIZE=1050 diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig index 9b926b2218..3462203221 100644 --- a/configs/stm32f769-disco_spl_defconfig +++ b/configs/stm32f769-disco_spl_defconfig @@ -35,7 +35,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x81c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_SYS_PBSIZE=1050 diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 7bcb319100..78cbaa7a0b 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -32,7 +32,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=2071 CONFIG_SYS_BOOTM_LEN=0x3c00000 diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index 9bca6fe2ee..0ae901a723 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -32,7 +32,7 @@ CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0xffe5000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0xffe5000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x8800 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x8000 diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index 16c127b740..817fb4142d 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -43,7 +43,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_SYS_MAXARGS=32 diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 51e0d254f4..b284494092 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -43,7 +43,7 @@ CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub" CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x8000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x8000000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y diff --git a/doc/develop/falcon.rst b/doc/develop/falcon.rst index a569d1a295..2f25fc8532 100644 --- a/doc/develop/falcon.rst +++ b/doc/develop/falcon.rst @@ -63,7 +63,7 @@ CONFIG_CMD_SPL Enable the "spl export" command. The command "spl export" is then available in U-Boot mode. -CONFIG_SYS_SPL_ARGS_ADDR +CONFIG_SPL_PAYLOAD_ARGS_ADDR Address in RAM where the parameters must be copied by SPL. In most cases, it is + 0x100.