From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Date: Mon, 28 Aug 2023 21:38:02 +0000 (+0200)
Subject: board: toradex: verdin-imx8mp: enable usb device and fastboot support
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=9bd2e70b3122c3584e2378eb5dfa1fe199d03a42;p=u-boot.git

board: toradex: verdin-imx8mp: enable usb device and fastboot support

Enable USB device and fastboot support which may be used to load the
Toradex Easy Installer FIT image.

While at it also enable USB mass storage aka UMS support.

Note that the i.MX 8M Plus recovery mode support is based on the USB
boot stage of the BOOTROM and does NOT require USB SDP SPL aka serial
downloader support.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
---

diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
index bb20a2227f..eec1d964b9 100644
--- a/configs/verdin-imx8mp_defconfig
+++ b/configs/verdin-imx8mp_defconfig
@@ -79,6 +79,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_READ=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -108,6 +109,12 @@ CONFIG_BOOTCOUNT_ENV=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_FSL_CAAM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x40000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_GPIO_HOG=y
 CONFIG_SPL_GPIO_HOG=y
 CONFIG_MXC_GPIO=y
@@ -138,6 +145,7 @@ CONFIG_DWC_ETH_QOS_IMX=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_PHY=y
 CONFIG_PHY_IMX8MQ_USB=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
@@ -160,14 +168,20 @@ CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_TMU=y
 CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_MXC_USB_OTG_HACTIVE=y
+# CONFIG_USB_EHCI_MX7 is not set
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_IMX_WATCHDOG=y
 CONFIG_HEXDUMP=y