From: Stephen Warren Date: Mon, 31 Oct 2011 06:51:36 +0000 (+0000) Subject: tegra2: Modify MMC driver to handle power and cd GPIOs X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=9877841f6bba3723f5d21cc58eb99f3417e90725;p=u-boot.git tegra2: Modify MMC driver to handle power and cd GPIOs Pass the GPIO numbers for power and card detect to tegra2_mmc_init(), and modify that function to perform all required GPIO initialization. This removes the need for board files to perform these operations. Move board_mmc_getcd() into tegra2_mmc.c now that the driver knows which GPIOs to use. Update affected call-sites in seaboard.c and harmony.c. Note that this change should make all SD ports work on Harmony, since the required GPIO setup is now being performed. v4: Fix prototype of tegra2_mmc_init() in board.h to match driver change. Remove prototype of gpio_config_mmc() from board.h Signed-off-by: Stephen Warren Cc: Andy Fleming Tested-by: Simon Glass Acked-by: Simon Glass Acked-by: Andy Fleming Signed-off-by: Tom Warren --- diff --git a/board/nvidia/common/board.h b/board/nvidia/common/board.h index 344e70283e..35acbca82b 100644 --- a/board/nvidia/common/board.h +++ b/board/nvidia/common/board.h @@ -26,7 +26,6 @@ void tegra2_start(void); void gpio_config_uart(void); -void gpio_config_mmc(void); -int tegra2_mmc_init(int dev_index, int bus_width); +int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); #endif /* BOARD_H */ diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index f2c3867251..3cbe820c95 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -25,6 +25,7 @@ #include #include #include +#include #ifdef CONFIG_TEGRA2_MMC #include #endif @@ -72,15 +73,6 @@ static void pin_mux_mmc(void) pinmux_tristate_disable(PINGRP_ATC); } -/* - * Routine: gpio_config_mmc - * Description: Set GPIOs for SD card - */ -void gpio_config_mmc(void) -{ - /* Not implemented for now */ -} - /* this is a weak define that we are overriding */ int board_mmc_init(bd_t *bd) { @@ -88,29 +80,16 @@ int board_mmc_init(bd_t *bd) /* Enable muxes, etc. for SDMMC controllers */ pin_mux_mmc(); - gpio_config_mmc(); debug("board_mmc_init: init SD slot J26\n"); /* init dev 0, SD slot J26, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra2_mmc_init(0, 4); + tegra2_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); debug("board_mmc_init: init SD slot J5\n"); /* init dev 2, SD slot J5, with 4-bit bus */ - tegra2_mmc_init(2, 4); + tegra2_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); return 0; } - -/* this is a weak define that we are overriding */ -int board_mmc_getcd(u8 *cd, struct mmc *mmc) -{ - debug("board_mmc_getcd called\n"); - /* - * Hard-code CD presence for now. Need to add GPIO inputs - * for Harmony - */ - *cd = 1; - return 0; -} #endif diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 22a0e69f06..356d616ab1 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -87,19 +87,6 @@ static void pin_mux_mmc(void) pinmux_tristate_disable(PINGRP_ATC); } -/* - * Routine: gpio_config_mmc - * Description: Set GPIOs for SDMMC3 SDIO slot. - */ -void gpio_config_mmc(void) -{ - /* Set EN_VDDIO_SD (GPIO I6) */ - gpio_direction_output(GPIO_PI6, 1); - - /* Config pin as GPI for Card Detect (GPIO I5) */ - gpio_direction_input(GPIO_PI5); -} - /* this is a weak define that we are overriding */ int board_mmc_init(bd_t *bd) { @@ -107,31 +94,15 @@ int board_mmc_init(bd_t *bd) /* Enable muxes, etc. for SDMMC controllers */ pin_mux_mmc(); - gpio_config_mmc(); debug("board_mmc_init: init eMMC\n"); /* init dev 0, eMMC chip, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra2_mmc_init(0, 4); + tegra2_mmc_init(0, 4, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 1, SD slot, with 4-bit bus */ - tegra2_mmc_init(1, 4); - - return 0; -} - -/* this is a weak define that we are overriding */ -int board_mmc_getcd(u8 *cd, struct mmc *mmc) -{ - debug("board_mmc_getcd called\n"); - *cd = 1; /* Assume card is inserted, or eMMC */ - - if (IS_SD(mmc)) { - /* Seaboard SDMMC3 = SDIO3_CD = GPIO_PI5 */ - if (gpio_get_value(GPIO_PI5)) - *cd = 0; - } + tegra2_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); return 0; } diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c index ccf48bbb17..035a8687df 100644 --- a/drivers/mmc/tegra2_mmc.c +++ b/drivers/mmc/tegra2_mmc.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include @@ -473,20 +474,37 @@ static int mmc_core_init(struct mmc *mmc) return 0; } -static int tegra2_mmc_initialize(int dev_index, int bus_width) +int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) { struct mmc_host *host; + char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */ struct mmc *mmc; - debug(" mmc_initialize called\n"); + debug(" tegra2_mmc_init: index %d, bus width %d " + "pwr_gpio %d cd_gpio %d\n", + dev_index, bus_width, pwr_gpio, cd_gpio); host = &mmc_host[dev_index]; host->clock = 0; + host->pwr_gpio = pwr_gpio; + host->cd_gpio = cd_gpio; tegra2_get_setup(host, dev_index); clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000); + if (host->pwr_gpio >= 0) { + sprintf(gpusage, "SD/MMC%d PWR", dev_index); + gpio_request(host->pwr_gpio, gpusage); + gpio_direction_output(host->pwr_gpio, 1); + } + + if (host->cd_gpio >= 0) { + sprintf(gpusage, "SD/MMC%d CD", dev_index); + gpio_request(host->cd_gpio, gpusage); + gpio_direction_input(host->cd_gpio); + } + mmc = &mmc_dev[dev_index]; sprintf(mmc->name, "Tegra2 SD/MMC"); @@ -518,9 +536,21 @@ static int tegra2_mmc_initialize(int dev_index, int bus_width) return 0; } -int tegra2_mmc_init(int dev_index, int bus_width) +/* this is a weak define that we are overriding */ +int board_mmc_getcd(u8 *cd, struct mmc *mmc) { - debug(" tegra2_mmc_init: index %d, bus width %d\n", - dev_index, bus_width); - return tegra2_mmc_initialize(dev_index, bus_width); + struct mmc_host *host = (struct mmc_host *)mmc->priv; + + debug("board_mmc_getcd called\n"); + + *cd = 1; /* Assume card is inserted, or eMMC */ + + if (IS_SD(mmc)) { + if (host->cd_gpio >= 0) { + if (gpio_get_value(host->cd_gpio)) + *cd = 0; + } + } + + return 0; } diff --git a/drivers/mmc/tegra2_mmc.h b/drivers/mmc/tegra2_mmc.h index 671583c422..b2f6c5baad 100644 --- a/drivers/mmc/tegra2_mmc.h +++ b/drivers/mmc/tegra2_mmc.h @@ -123,9 +123,11 @@ struct mmc_host { unsigned int clock; /* Current clock (MHz) */ unsigned int base; /* Base address, SDMMC1/2/3/4 */ enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ + int pwr_gpio; /* Power GPIO */ + int cd_gpio; /* Change Detect GPIO */ }; -int tegra2_mmc_init(int dev_index, int bus_width); +int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); #endif /* __ASSEMBLY__ */ #endif /* __TEGRA2_MMC_H_ */