From: Thomas Chou Date: Thu, 22 Oct 2015 07:29:11 +0000 (+0800) Subject: net: convert altera_tse to driver model and phylib X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=96fa1e4385bb1b63c58c48d10b552605f47a6f7f;p=u-boot.git net: convert altera_tse to driver model and phylib Convert altera_tse to driver model and phylib. Signed-off-by: Thomas Chou Reviewed-by: Marek Vasut Reviewed-by: Simon Glass --- diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig index ea07b567f5..fbc27ea17f 100644 --- a/configs/nios2-generic_defconfig +++ b/configs/nios2-generic_defconfig @@ -18,6 +18,8 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_ALTERA_PIO=y CONFIG_MISC=y CONFIG_ALTERA_SYSID=y +CONFIG_DM_ETH=y +CONFIG_ALTERA_TSE=y CONFIG_ALTERA_JTAG_UART=y CONFIG_ALTERA_JTAG_UART_BYPASS=y CONFIG_TIMER=y diff --git a/doc/device-tree-bindings/net/altera_tse.txt b/doc/device-tree-bindings/net/altera_tse.txt new file mode 100644 index 0000000000..cb190df65f --- /dev/null +++ b/doc/device-tree-bindings/net/altera_tse.txt @@ -0,0 +1,112 @@ +* Altera Triple-Speed Ethernet MAC driver (TSE) + +Required properties: +- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should + be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE. +- reg: Address and length of the register set for the device. It contains + the information of registers in the same order as described by reg-names +- reg-names: Should contain the reg names + "control_port": MAC configuration space region + "tx_csr": xDMA Tx dispatcher control and status space region + "tx_desc": MSGDMA Tx dispatcher descriptor space region + "rx_csr" : xDMA Rx dispatcher control and status space region + "rx_desc": MSGDMA Rx dispatcher descriptor space region + "rx_resp": MSGDMA Rx dispatcher response space region + "s1": SGDMA descriptor memory +- interrupts: Should contain the TSE interrupts and it's mode. +- interrupt-names: Should contain the interrupt names + "rx_irq": xDMA Rx dispatcher interrupt + "tx_irq": xDMA Tx dispatcher interrupt +- rx-fifo-depth: MAC receive FIFO buffer depth in bytes +- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes +- phy-mode: See ethernet.txt in the same directory. +- phy-handle: See ethernet.txt in the same directory. +- phy-addr: See ethernet.txt in the same directory. A configuration should + include phy-handle or phy-addr. +- altr,has-supplementary-unicast: + If present, TSE supports additional unicast addresses. + Otherwise additional unicast addresses are not supported. +- altr,has-hash-multicast-filter: + If present, TSE supports a hash based multicast filter. + Otherwise, hash-based multicast filtering is not supported. + +- mdio device tree subnode: When the TSE has a phy connected to its local + mdio, there must be device tree subnode with the following + required properties: + + - compatible: Must be "altr,tse-mdio". + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. + + For each phy on the mdio bus, there must be a node with the following + fields: + + - reg: phy id used to communicate to phy. + - device_type: Must be "ethernet-phy". + +Optional properties: +- local-mac-address: See ethernet.txt in the same directory. +- max-frame-size: See ethernet.txt in the same directory. + +Example: + + tse_sub_0_eth_tse_0: ethernet@0x1,00000000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0x00000001 0x00000000 0x00000400>, + <0x00000001 0x00000460 0x00000020>, + <0x00000001 0x00000480 0x00000020>, + <0x00000001 0x000004A0 0x00000008>, + <0x00000001 0x00000400 0x00000020>, + <0x00000001 0x00000420 0x00000020>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 41 4>, <0 40 4>; + interrupt-names = "rx_irq", "tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + address-bits = <48>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-mode = "gmii"; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + phy-handle = <&phy0>; + mdio { + compatible = "altr,tse-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0x0>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + }; + }; + + tse_sub_1_eth_tse_0: ethernet@0x1,00001000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0x00000001 0x00001000 0x00000400>, + <0x00000001 0x00001460 0x00000020>, + <0x00000001 0x00001480 0x00000020>, + <0x00000001 0x000014A0 0x00000008>, + <0x00000001 0x00001400 0x00000020>, + <0x00000001 0x00001420 0x00000020>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 43 4>, <0 42 4>; + interrupt-names = "rx_irq", "tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + address-bits = <48>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-mode = "gmii"; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + phy-handle = <&phy1>; + }; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index bbec6a60e0..a03a95d0fb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -25,6 +25,15 @@ menuconfig NETDEVICES if NETDEVICES +config ALTERA_TSE + bool "Altera Triple-Speed Ethernet MAC support" + depends on DM_ETH + select PHYLIB + help + This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. + Please find details on the "Triple-Speed Ethernet MegaCore Function + Resource Center" of Altera. + config E1000 bool "Intel PRO/1000 Gigabit Ethernet support" help diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c index ad3bd1e212..319983c482 100644 --- a/drivers/net/altera_tse.c +++ b/drivers/net/altera_tse.c @@ -8,91 +8,44 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include #include -#include +#include +#include +#include +#include +#include #include -#include #include #include -#include +#include #include "altera_tse.h" -/* sgdma debug - print descriptor */ -static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc) -{ - debug("SGDMA DEBUG :\n"); - debug("desc->source : 0x%x \n", (unsigned int)desc->source); - debug("desc->destination : 0x%x \n", (unsigned int)desc->destination); - debug("desc->next : 0x%x \n", (unsigned int)desc->next); - debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad); - debug("desc->destination_pad : 0x%x \n", - (unsigned int)desc->destination_pad); - debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad); - debug("desc->bytes_to_transfer : 0x%x \n", - (unsigned int)desc->bytes_to_transfer); - debug("desc->actual_bytes_transferred : 0x%x \n", - (unsigned int)desc->actual_bytes_transferred); - debug("desc->descriptor_status : 0x%x \n", - (unsigned int)desc->descriptor_status); - debug("desc->descriptor_control : 0x%x \n", - (unsigned int)desc->descriptor_control); -} +DECLARE_GLOBAL_DATA_PTR; -/* This is a generic routine that the SGDMA mode-specific routines - * call to populate a descriptor. - * arg1 :pointer to first SGDMA descriptor. - * arg2 :pointer to next SGDMA descriptor. - * arg3 :Address to where data to be written. - * arg4 :Address from where data to be read. - * arg5 :no of byte to transaction. - * arg6 :variable indicating to generate start of packet or not - * arg7 :read fixed - * arg8 :write fixed - * arg9 :read burst - * arg10 :write burst - * arg11 :atlantic_channel number - */ -static void alt_sgdma_construct_descriptor_burst( - volatile struct alt_sgdma_descriptor *desc, - volatile struct alt_sgdma_descriptor *next, - unsigned int *read_addr, - unsigned int *write_addr, +static inline void alt_sgdma_construct_descriptor( + struct alt_sgdma_descriptor *desc, + struct alt_sgdma_descriptor *next, + void *read_addr, + void *write_addr, unsigned short length_or_eop, int generate_eop, int read_fixed, - int write_fixed_or_sop, - int read_burst, - int write_burst, - unsigned char atlantic_channel) + int write_fixed_or_sop) { + unsigned char val; + /* * Mark the "next" descriptor as "not" owned by hardware. This prevents - * The SGDMA controller from continuing to process the chain. This is - * done as a single IO write to bypass cache, without flushing - * the entire descriptor, since only the 8-bit descriptor status must - * be flushed. + * The SGDMA controller from continuing to process the chain. */ - if (!next) - debug("Next descriptor not defined!!\n"); - - next->descriptor_control = (next->descriptor_control & - ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK); - - desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF); - desc->destination = - (unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF); - desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF); - desc->source_pad = 0x0; - desc->destination_pad = 0x0; - desc->next_pad = 0x0; - desc->bytes_to_transfer = length_or_eop; - desc->actual_bytes_transferred = 0; - desc->descriptor_status = 0x0; + next->descriptor_control = next->descriptor_control & + ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK; - /* SGDMA burst not currently supported */ - desc->read_burst = 0; - desc->write_burst = 0; + memset(desc, 0, sizeof(struct alt_sgdma_descriptor)); + desc->source = virt_to_phys(read_addr); + desc->destination = virt_to_phys(write_addr); + desc->next = virt_to_phys(next); + desc->bytes_to_transfer = length_or_eop; /* * Set the descriptor control block as follows: @@ -108,108 +61,49 @@ static void alt_sgdma_construct_descriptor_burst( * pointing at this descriptor, it will not run (via the "owned by * hardware" bit) until all other descriptor has been set up. */ - - desc->descriptor_control = - ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) | - (generate_eop ? - ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) | - (read_fixed ? - ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) | - (write_fixed_or_sop ? - ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) | - (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0) - ); + val = ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK; + if (generate_eop) + val |= ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK; + if (read_fixed) + val |= ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK; + if (write_fixed_or_sop) + val |= ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK; + desc->descriptor_control = val; } -static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev, - volatile struct alt_sgdma_descriptor *desc) +static int alt_sgdma_wait_transfer(struct alt_sgdma_registers *regs) { - unsigned int status; - int counter = 0; - - /* Wait for any pending transfers to complete */ - alt_sgdma_print_desc(desc); - status = dev->status; + int status; + ulong ctime; - counter = 0; - while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { - if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) + /* Wait for the descriptor (chain) to complete */ + ctime = get_timer(0); + while (1) { + status = readl(®s->status); + if (!(status & ALT_SGDMA_STATUS_BUSY_MSK)) + break; + if (get_timer(ctime) > ALT_TSE_SGDMA_BUSY_TIMEOUT) { + status = -ETIMEDOUT; + debug("sgdma timeout\n"); break; + } } - if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) - debug("Timeout waiting sgdma in do sync!\n"); - - /* - * Clear any (previous) status register information - * that might occlude our error checking later. - */ - dev->status = 0xFF; - - /* Point the controller at the descriptor */ - dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; - debug("next desc in sgdma 0x%x\n", - (unsigned int)dev->next_descriptor_pointer); - - /* - * Set up SGDMA controller to: - * - Disable interrupt generation - * - Run once a valid descriptor is written to controller - * - Stop on an error with any particular descriptor - */ - dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | - ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); - - /* Wait for the descriptor (chain) to complete */ - status = dev->status; - debug("wait for sgdma...."); - while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) - ; - debug("done\n"); - /* Clear Run */ - dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK)); - - /* Get & clear status register contents */ - status = dev->status; - dev->status = 0xFF; + writel(0, ®s->control); + /* Clear status */ + writel(0xff, ®s->status); - /* we really should check if the transfer completes properly */ - debug("tx sgdma status = 0x%x", status); - return 0; + return status; } -static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev, - volatile struct alt_sgdma_descriptor *desc) +static int alt_sgdma_start_transfer(struct alt_sgdma_registers *regs, + struct alt_sgdma_descriptor *desc) { - int counter = 0; - - /* Wait for any pending transfers to complete */ - alt_sgdma_print_desc(desc); - - counter = 0; - while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { - if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) - break; - } - - if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) - debug("Timeout waiting sgdma in do async!\n"); - - /* - * Clear the RUN bit in the control register. This is needed - * to restart the SGDMA engine later on. - */ - dev->control = 0; - - /* - * Clear any (previous) status register information - * that might occlude our error checking later. - */ - dev->status = 0xFF; + unsigned int val; /* Point the controller at the descriptor */ - dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; + writel(virt_to_phys(desc), ®s->next_descriptor_pointer); /* * Set up SGDMA controller to: @@ -217,26 +111,31 @@ static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev, * - Run once a valid descriptor is written to controller * - Stop on an error with any particular descriptor */ - dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | - ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); + val = ALT_SGDMA_CONTROL_RUN_MSK | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK; + writel(val, ®s->control); - /* we really should check if the transfer completes properly */ return 0; } -/* u-boot interface */ -static int tse_adjust_link(struct altera_tse_priv *priv) +static void tse_adjust_link(struct altera_tse_priv *priv, + struct phy_device *phydev) { + struct alt_tse_mac *mac_dev = priv->mac_dev; unsigned int refvar; - refvar = priv->mac_dev->command_config.image; + if (!phydev->link) { + debug("%s: No link.\n", phydev->dev->name); + return; + } + + refvar = readl(&mac_dev->command_config); - if (!(priv->duplexity)) + if (phydev->duplex) refvar |= ALTERA_TSE_CMD_HD_ENA_MSK; else refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK; - switch (priv->speed) { + switch (phydev->speed) { case 1000: refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK; refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK; @@ -250,721 +149,383 @@ static int tse_adjust_link(struct altera_tse_priv *priv) refvar |= ALTERA_TSE_CMD_ENA_10_MSK; break; } - priv->mac_dev->command_config.image = refvar; - - return 0; + writel(refvar, &mac_dev->command_config); } -static int tse_eth_send(struct eth_device *dev, void *packet, int length) +static int altera_tse_send(struct udevice *dev, void *packet, int length) { - struct altera_tse_priv *priv = dev->priv; - volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; - volatile struct alt_sgdma_descriptor *tx_desc = - (volatile struct alt_sgdma_descriptor *)priv->tx_desc; - - volatile struct alt_sgdma_descriptor *tx_desc_cur = - (volatile struct alt_sgdma_descriptor *)&tx_desc[0]; - - flush_dcache_range((unsigned long)packet, - (unsigned long)packet + length); - alt_sgdma_construct_descriptor_burst( - (volatile struct alt_sgdma_descriptor *)&tx_desc[0], - (volatile struct alt_sgdma_descriptor *)&tx_desc[1], - (unsigned int *)packet, /* read addr */ - (unsigned int *)0, + struct altera_tse_priv *priv = dev_get_priv(dev); + struct alt_sgdma_descriptor *tx_desc = priv->tx_desc; + unsigned long tx_buf = (unsigned long)packet; + + flush_dcache_range(tx_buf, tx_buf + length); + alt_sgdma_construct_descriptor( + tx_desc, + tx_desc + 1, + packet, /* read addr */ + NULL, /* write addr */ length, /* length or EOP ,will change for each tx */ - 0x1, /* gen eop */ - 0x0, /* read fixed */ - 0x1, /* write fixed or sop */ - 0x0, /* read burst */ - 0x0, /* write burst */ - 0x0 /* channel */ + 1, /* gen eop */ + 0, /* read fixed */ + 1 /* write fixed or sop */ ); - debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length); /* send the packet */ - debug("sending packet\n"); - alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur); - debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred); - return tx_desc_cur->actual_bytes_transferred; + alt_sgdma_start_transfer(priv->sgdma_tx, tx_desc); + alt_sgdma_wait_transfer(priv->sgdma_tx); + debug("sent %d bytes\n", tx_desc->actual_bytes_transferred); + + return tx_desc->actual_bytes_transferred; } -static int tse_eth_rx(struct eth_device *dev) +static int altera_tse_recv(struct udevice *dev, int flags, uchar **packetp) { - int packet_length = 0; - struct altera_tse_priv *priv = dev->priv; - volatile struct alt_sgdma_descriptor *rx_desc = - (volatile struct alt_sgdma_descriptor *)priv->rx_desc; - volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0]; + struct altera_tse_priv *priv = dev_get_priv(dev); + struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; + int packet_length; - if (rx_desc_cur->descriptor_status & + if (rx_desc->descriptor_status & ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) { - debug("got packet\n"); packet_length = rx_desc->actual_bytes_transferred; - net_process_received_packet(net_rx_packets[0], packet_length); - - /* start descriptor again */ - flush_dcache_range((unsigned long)(net_rx_packets[0]), - (unsigned long)(net_rx_packets[0] + - PKTSIZE_ALIGN)); - alt_sgdma_construct_descriptor_burst( - (volatile struct alt_sgdma_descriptor *)&rx_desc[0], - (volatile struct alt_sgdma_descriptor *)&rx_desc[1], - (unsigned int)0x0, /* read addr */ - (unsigned int *)net_rx_packets[0], - 0x0, /* length or EOP */ - 0x0, /* gen eop */ - 0x0, /* read fixed */ - 0x0, /* write fixed or sop */ - 0x0, /* read burst */ - 0x0, /* write burst */ - 0x0 /* channel */ - ); - - /* setup the sgdma */ - alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]); + debug("recv %d bytes\n", packet_length); + *packetp = priv->rx_buf; return packet_length; } - return -1; + return -EAGAIN; } -static void tse_eth_halt(struct eth_device *dev) +static int altera_tse_free_pkt(struct udevice *dev, uchar *packet, + int length) { - /* don't do anything! */ - /* this gets called after each uboot */ - /* network command. don't need to reset the thing all of the time */ + struct altera_tse_priv *priv = dev_get_priv(dev); + struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; + unsigned long rx_buf = (unsigned long)priv->rx_buf; + + alt_sgdma_wait_transfer(priv->sgdma_rx); + invalidate_dcache_range(rx_buf, rx_buf + PKTSIZE_ALIGN); + alt_sgdma_construct_descriptor( + rx_desc, + rx_desc + 1, + NULL, /* read addr */ + priv->rx_buf, /* write addr */ + 0, /* length or EOP */ + 0, /* gen eop */ + 0, /* read fixed */ + 0 /* write fixed or sop */ + ); + + /* setup the sgdma */ + alt_sgdma_start_transfer(priv->sgdma_rx, rx_desc); + debug("recv setup\n"); + + return 0; } -static void tse_eth_reset(struct eth_device *dev) +static void altera_tse_stop(struct udevice *dev) { - /* stop sgdmas, disable tse receive */ - struct altera_tse_priv *priv = dev->priv; - volatile struct alt_tse_mac *mac_dev = priv->mac_dev; - volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx; - volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; - int counter; - volatile struct alt_sgdma_descriptor *rx_desc = - (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0]; + struct altera_tse_priv *priv = dev_get_priv(dev); + struct alt_tse_mac *mac_dev = priv->mac_dev; + struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx; + struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; + struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; + unsigned int status; + int ret; + ulong ctime; /* clear rx desc & wait for sgdma to complete */ rx_desc->descriptor_control = 0; - rx_sgdma->control = 0; - counter = 0; - while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { - if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) - break; - } - - if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { - debug("Timeout waiting for rx sgdma!\n"); - rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; - rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; - } - - counter = 0; - tx_sgdma->control = 0; - while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { - if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) - break; - } + writel(0, &rx_sgdma->control); + ret = alt_sgdma_wait_transfer(rx_sgdma); + if (ret == -ETIMEDOUT) + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, + &rx_sgdma->control); + + writel(0, &tx_sgdma->control); + ret = alt_sgdma_wait_transfer(tx_sgdma); + if (ret == -ETIMEDOUT) + writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK, + &tx_sgdma->control); - if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { - debug("Timeout waiting for tx sgdma!\n"); - tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; - tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; - } /* reset the mac */ - mac_dev->command_config.bits.transmit_enable = 1; - mac_dev->command_config.bits.receive_enable = 1; - mac_dev->command_config.bits.software_reset = 1; - - counter = 0; - while (mac_dev->command_config.bits.software_reset) { - if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR) + writel(ALTERA_TSE_CMD_SW_RESET_MSK, &mac_dev->command_config); + ctime = get_timer(0); + while (1) { + status = readl(&mac_dev->command_config); + if (!(status & ALTERA_TSE_CMD_SW_RESET_MSK)) break; + if (get_timer(ctime) > ALT_TSE_SW_RESET_TIMEOUT) { + debug("Reset mac timeout\n"); + break; + } } - - if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR) - debug("TSEMAC SW reset bit never cleared!\n"); } -static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum) +static int tse_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) { - volatile struct alt_tse_mac *mac_dev; - unsigned int *mdio_regs; - unsigned int data; - u16 value; - - mac_dev = priv->mac_dev; + struct altera_tse_priv *priv = bus->priv; + struct alt_tse_mac *mac_dev = priv->mac_dev; + unsigned int value; /* set mdio address */ - mac_dev->mdio_phy1_addr = priv->phyaddr; - mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; - + writel(addr, &mac_dev->mdio_phy1_addr); /* get the data */ - data = mdio_regs[regnum]; + value = readl(&mac_dev->mdio_phy1[reg]); - value = data & 0xffff; - - return value; + return value & 0xffff; } -static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum, - unsigned int value) +static int tse_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, + u16 val) { - volatile struct alt_tse_mac *mac_dev; - unsigned int *mdio_regs; - unsigned int data; - - mac_dev = priv->mac_dev; + struct altera_tse_priv *priv = bus->priv; + struct alt_tse_mac *mac_dev = priv->mac_dev; /* set mdio address */ - mac_dev->mdio_phy1_addr = priv->phyaddr; - mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; - - /* get the data */ - data = (unsigned int)value; - - mdio_regs[regnum] = data; - - return 0; -} - -/* MDIO access to phy */ -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) -static int altera_tse_miiphy_write(const char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - struct eth_device *dev; - struct altera_tse_priv *priv; - dev = eth_get_dev_by_name(devname); - priv = dev->priv; - - tse_mdio_write(priv, (uint) reg, (uint) value); - - return 0; -} - -static int altera_tse_miiphy_read(const char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - struct eth_device *dev; - struct altera_tse_priv *priv; - volatile struct alt_tse_mac *mac_dev; - unsigned int *mdio_regs; - - dev = eth_get_dev_by_name(devname); - priv = dev->priv; - - mac_dev = priv->mac_dev; - mac_dev->mdio_phy1_addr = (int)addr; - mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; - - *value = 0xffff & mdio_regs[reg]; - - return 0; - -} -#endif - -/* - * Also copied from tsec.c - */ -/* Parse the status register for link, and then do - * auto-negotiation - */ -static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv) -{ - /* - * Wait if the link is up, and autonegotiation is in progress - * (ie - we're capable and it's not done) - */ - mii_reg = tse_mdio_read(priv, MIIM_STATUS); - - if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE) - && !(mii_reg & BMSR_ANEGCOMPLETE)) { - int i = 0; - - puts("Waiting for PHY auto negotiation to complete"); - while (!(mii_reg & BMSR_ANEGCOMPLETE)) { - /* - * Timeout reached ? - */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts(" TIMEOUT !\n"); - priv->link = 0; - return 0; - } - - if ((i++ % 1000) == 0) - putc('.'); - udelay(1000); /* 1 ms */ - mii_reg = tse_mdio_read(priv, MIIM_STATUS); - } - puts(" done\n"); - priv->link = 1; - udelay(500000); /* another 500 ms (results in faster booting) */ - } else { - if (mii_reg & MIIM_STATUS_LINK) { - debug("Link is up\n"); - priv->link = 1; - } else { - debug("Link is down\n"); - priv->link = 0; - } - } + writel(addr, &mac_dev->mdio_phy1_addr); + /* set the data */ + writel(val, &mac_dev->mdio_phy1[reg]); return 0; } -/* Parse the 88E1011's status register for speed and duplex - * information - */ -static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv) +static int tse_mdio_init(const char *name, struct altera_tse_priv *priv) { - uint speed; - - mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); - - if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && - !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { - int i = 0; - - puts("Waiting for PHY realtime link"); - while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { - /* Timeout reached ? */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts(" TIMEOUT !\n"); - priv->link = 0; - break; - } - - if ((i++ == 1000) == 0) { - i = 0; - puts("."); - } - udelay(1000); /* 1 ms */ - mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); - } - puts(" done\n"); - udelay(500000); /* another 500 ms (results in faster booting) */ - } else { - if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) - priv->link = 1; - else - priv->link = 0; - } - - if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) - priv->duplexity = 1; - else - priv->duplexity = 0; - - speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED); + struct mii_dev *bus = mdio_alloc(); - switch (speed) { - case MIIM_88E1011_PHYSTAT_GBIT: - priv->speed = 1000; - debug("PHY Speed is 1000Mbit\n"); - break; - case MIIM_88E1011_PHYSTAT_100: - debug("PHY Speed is 100Mbit\n"); - priv->speed = 100; - break; - default: - debug("PHY Speed is 10Mbit\n"); - priv->speed = 10; + if (!bus) { + printf("Failed to allocate MDIO bus\n"); + return -ENOMEM; } - return 0; -} - -static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv) -{ - uint mii_data = tse_mdio_read(priv, mii_reg); - mii_data &= 0xfff0; - if ((priv->flags >= 1) && (priv->flags <= 4)) - mii_data |= 0xb; - else if (priv->flags == 5) - mii_data |= 0x4; - - return mii_data; -} + bus->read = tse_mdio_read; + bus->write = tse_mdio_write; + snprintf(bus->name, sizeof(bus->name), name); -static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv) -{ - uint mii_data = tse_mdio_read(priv, mii_reg); - mii_data &= ~0x82; - if ((priv->flags >= 1) && (priv->flags <= 4)) - mii_data |= 0x82; + bus->priv = (void *)priv; - return mii_data; + return mdio_register(bus); } -/* - * Returns which value to write to the control register. - * For 10/100, the value is slightly different - */ -static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv) -{ - return MIIM_CONTROL_INIT; -} - -/* - * PHY & MDIO code - * Need to add SGMII stuff - * - */ - -static struct phy_info phy_info_M88E1111S = { - 0x01410cc, - "Marvell 88E1111S", - 4, - (struct phy_cmd[]){ /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_88E1111_PHY_EXT_SR, 0x848f, - &mii_m88e1111s_setmode_sr}, - /* Delay RGMII TX and RX */ - {MIIM_88E1111_PHY_EXT_CR, 0x0cd2, - &mii_m88e1111s_setmode_cr}, - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]){ /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_88E1011_PHY_STATUS, miim_read, - &mii_parse_88E1011_psr}, - {miim_end,} - }, - (struct phy_cmd[]){ /* shutdown */ - {miim_end,} - }, -}; - -/* a generic flavor. */ -static struct phy_info phy_info_generic = { - 0, - "Unknown/Generic PHY", - 32, - (struct phy_cmd[]){ /* config */ - {MII_BMCR, BMCR_RESET, NULL}, - {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL}, - {miim_end,} - }, - (struct phy_cmd[]){ /* startup */ - {MII_BMSR, miim_read, NULL}, - {MII_BMSR, miim_read, &mii_parse_sr}, - {miim_end,} - }, - (struct phy_cmd[]){ /* shutdown */ - {miim_end,} - } -}; - -static struct phy_info *phy_info[] = { - &phy_info_M88E1111S, - NULL -}; - - /* Grab the identifier of the device's PHY, and search through - * all of the known PHYs to see if one matches. If so, return - * it, if not, return NULL - */ -static struct phy_info *get_phy_info(struct eth_device *dev) +static int tse_phy_init(struct altera_tse_priv *priv, void *dev) { - struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; - uint phy_reg, phy_ID; - int i; - struct phy_info *theInfo = NULL; - - /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = tse_mdio_read(priv, MIIM_PHYIR1); - phy_ID = (phy_reg & 0xffff) << 16; - - /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = tse_mdio_read(priv, MIIM_PHYIR2); - phy_ID |= (phy_reg & 0xffff); - - /* loop through all the known PHY types, and find one that */ - /* matches the ID we read from the PHY. */ - for (i = 0; phy_info[i]; i++) { - if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) { - theInfo = phy_info[i]; - break; - } - } - - if (theInfo == NULL) { - theInfo = &phy_info_generic; - debug("%s: No support for PHY id %x; assuming generic\n", - dev->name, phy_ID); - } else - debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID); + struct phy_device *phydev; + unsigned int mask = 0xffffffff; - return theInfo; -} - -/* Execute the given series of commands on the given device's - * PHY, running functions as necessary - */ -static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd) -{ - int i; - uint result; + if (priv->phyaddr) + mask = 1 << priv->phyaddr; - for (i = 0; cmd->mii_reg != miim_end; i++) { - if (cmd->mii_data == miim_read) { - result = tse_mdio_read(priv, cmd->mii_reg); + phydev = phy_find_by_mask(priv->bus, mask, priv->interface); + if (!phydev) + return -ENODEV; - if (cmd->funct != NULL) - (*(cmd->funct)) (result, priv); + phy_connect_dev(phydev, dev); - } else { - if (cmd->funct != NULL) - result = (*(cmd->funct)) (cmd->mii_reg, priv); - else - result = cmd->mii_data; + phydev->supported &= PHY_GBIT_FEATURES; + phydev->advertising = phydev->supported; - tse_mdio_write(priv, cmd->mii_reg, result); + priv->phydev = phydev; + phy_config(phydev); - } - cmd++; - } + return 0; } -/* Phy init code */ -static int init_phy(struct eth_device *dev) +static int altera_tse_write_hwaddr(struct udevice *dev) { - struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; - struct phy_info *curphy; - - /* Get the cmd structure corresponding to the attached - * PHY */ - curphy = get_phy_info(dev); - - if (curphy == NULL) { - priv->phyinfo = NULL; - debug("%s: No PHY found\n", dev->name); - - return 0; - } else - debug("%s found\n", curphy->name); - priv->phyinfo = curphy; - - phy_run_commands(priv, priv->phyinfo->config); + struct altera_tse_priv *priv = dev_get_priv(dev); + struct alt_tse_mac *mac_dev = priv->mac_dev; + struct eth_pdata *pdata = dev_get_platdata(dev); + u8 *hwaddr = pdata->enetaddr; + unsigned int mac_lo, mac_hi; + + mac_lo = (hwaddr[3] << 24) | (hwaddr[2] << 16) | + (hwaddr[1] << 8) | hwaddr[0]; + mac_hi = (hwaddr[5] << 8) | hwaddr[4]; + debug("Set MAC address to 0x%04x%08x\n", mac_hi, mac_lo); + + writel(mac_lo, &mac_dev->mac_addr_0); + writel(mac_hi, &mac_dev->mac_addr_1); + writel(mac_lo, &mac_dev->supp_mac_addr_0_0); + writel(mac_hi, &mac_dev->supp_mac_addr_0_1); + writel(mac_lo, &mac_dev->supp_mac_addr_1_0); + writel(mac_hi, &mac_dev->supp_mac_addr_1_1); + writel(mac_lo, &mac_dev->supp_mac_addr_2_0); + writel(mac_hi, &mac_dev->supp_mac_addr_2_1); + writel(mac_lo, &mac_dev->supp_mac_addr_3_0); + writel(mac_hi, &mac_dev->supp_mac_addr_3_1); - return 1; -} - -static int tse_set_mac_address(struct eth_device *dev) -{ - struct altera_tse_priv *priv = dev->priv; - volatile struct alt_tse_mac *mac_dev = priv->mac_dev; - - debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n", - dev->enetaddr[5], dev->enetaddr[4], - dev->enetaddr[3], dev->enetaddr[2], - dev->enetaddr[1], dev->enetaddr[0]); - mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 | - (dev->enetaddr[2]) << 16 | - (dev->enetaddr[1]) << 8 | (dev->enetaddr[0])); - - mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 | - (dev->enetaddr[4])) & 0xFFFF); - - /* Set the MAC address */ - mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0; - mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1; - - /* Set the MAC address */ - mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0; - mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1; - - /* Set the MAC address */ - mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0; - mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1; - - /* Set the MAC address */ - mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0; - mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1; return 0; } -static int tse_eth_init(struct eth_device *dev, bd_t * bd) +static int altera_tse_start(struct udevice *dev) { - int dat; - struct altera_tse_priv *priv = dev->priv; - volatile struct alt_tse_mac *mac_dev = priv->mac_dev; - volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc; - volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; - volatile struct alt_sgdma_descriptor *rx_desc_cur = - (volatile struct alt_sgdma_descriptor *)&rx_desc[0]; - - /* stop controller */ - debug("Reseting TSE & SGDMAs\n"); - tse_eth_reset(dev); - - /* start the phy */ - debug("Configuring PHY\n"); - phy_run_commands(priv, priv->phyinfo->startup); + struct altera_tse_priv *priv = dev_get_priv(dev); + struct alt_tse_mac *mac_dev = priv->mac_dev; + unsigned int val; + int ret; /* need to create sgdma */ - debug("Configuring tx desc\n"); - alt_sgdma_construct_descriptor_burst( - (volatile struct alt_sgdma_descriptor *)&tx_desc[0], - (volatile struct alt_sgdma_descriptor *)&tx_desc[1], - (unsigned int *)NULL, /* read addr */ - (unsigned int *)0, - 0, /* length or EOP ,will change for each tx */ - 0x1, /* gen eop */ - 0x0, /* read fixed */ - 0x1, /* write fixed or sop */ - 0x0, /* read burst */ - 0x0, /* write burst */ - 0x0 /* channel */ - ); debug("Configuring rx desc\n"); - flush_dcache_range((unsigned long)(net_rx_packets[0]), - (unsigned long)(net_rx_packets[0]) + PKTSIZE_ALIGN); - alt_sgdma_construct_descriptor_burst( - (volatile struct alt_sgdma_descriptor *)&rx_desc[0], - (volatile struct alt_sgdma_descriptor *)&rx_desc[1], - (unsigned int)0x0, /* read addr */ - (unsigned int *)net_rx_packets[0], - 0x0, /* length or EOP */ - 0x0, /* gen eop */ - 0x0, /* read fixed */ - 0x0, /* write fixed or sop */ - 0x0, /* read burst */ - 0x0, /* write burst */ - 0x0 /* channel */ - ); - /* start rx async transfer */ - debug("Starting rx sgdma\n"); - alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur); - + altera_tse_free_pkt(dev, priv->rx_buf, PKTSIZE_ALIGN); /* start TSE */ debug("Configuring TSE Mac\n"); /* Initialize MAC registers */ - mac_dev->max_frame_length = PKTSIZE_ALIGN; - mac_dev->rx_almost_empty_threshold = 8; - mac_dev->rx_almost_full_threshold = 8; - mac_dev->tx_almost_empty_threshold = 8; - mac_dev->tx_almost_full_threshold = 3; - mac_dev->tx_sel_empty_threshold = - CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; - mac_dev->tx_sel_full_threshold = 0; - mac_dev->rx_sel_empty_threshold = - CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; - mac_dev->rx_sel_full_threshold = 0; + writel(PKTSIZE_ALIGN, &mac_dev->max_frame_length); + writel(priv->rx_fifo_depth - 16, &mac_dev->rx_sel_empty_threshold); + writel(0, &mac_dev->rx_sel_full_threshold); + writel(priv->tx_fifo_depth - 16, &mac_dev->tx_sel_empty_threshold); + writel(0, &mac_dev->tx_sel_full_threshold); + writel(8, &mac_dev->rx_almost_empty_threshold); + writel(8, &mac_dev->rx_almost_full_threshold); + writel(8, &mac_dev->tx_almost_empty_threshold); + writel(3, &mac_dev->tx_almost_full_threshold); /* NO Shift */ - mac_dev->rx_cmd_stat.bits.rx_shift16 = 0; - mac_dev->tx_cmd_stat.bits.tx_shift16 = 0; + writel(0, &mac_dev->rx_cmd_stat); + writel(0, &mac_dev->tx_cmd_stat); /* enable MAC */ - dat = 0; - dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK; + val = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK; + writel(val, &mac_dev->command_config); + + /* Start up the PHY */ + ret = phy_startup(priv->phydev); + if (ret) { + debug("Could not initialize PHY %s\n", + priv->phydev->dev->name); + return ret; + } - mac_dev->command_config.image = dat; + tse_adjust_link(priv, priv->phydev); - /* configure the TSE core */ - /* -- output clocks, */ - /* -- and later config stuff for SGMII */ - if (priv->link) { - debug("Adjusting TSE to link speed\n"); - tse_adjust_link(priv); - } + if (!priv->phydev->link) + return -EIO; - return priv->link ? 0 : -1; + return 0; } -/* TSE init code */ -int altera_tse_initialize(u8 dev_num, int mac_base, - int sgdma_rx_base, int sgdma_tx_base, - u32 sgdma_desc_base, u32 sgdma_desc_size) +static int altera_tse_probe(struct udevice *dev) { - struct altera_tse_priv *priv; - struct eth_device *dev; - struct alt_sgdma_descriptor *rx_desc; - struct alt_sgdma_descriptor *tx_desc; - unsigned long dma_handle; - - dev = (struct eth_device *)malloc(sizeof *dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + struct altera_tse_priv *priv = dev_get_priv(dev); + const void *blob = gd->fdt_blob; + int node = dev->of_offset; + const char *list, *end; + const fdt32_t *cell; + void *base, *desc_mem = NULL; + unsigned long addr, size; + int len, idx; + int ret; - if (NULL == dev) - return 0; + /* + * decode regs, assume address-cells and size-cells are both one. + * there are multiple reg tuples, and they need to match with + * reg-names. + */ + list = fdt_getprop(blob, node, "reg-names", &len); + if (!list) + return -ENOENT; + end = list + len; + cell = fdt_getprop(blob, node, "reg", &len); + if (!cell) + return -ENOENT; + idx = 0; + while (list < end) { + addr = fdt_translate_address((void *)blob, + node, cell + idx); + size = fdt_addr_to_cpu(cell[idx + 1]); + base = ioremap(addr, size); + len = strlen(list); + if (strcmp(list, "control_port") == 0) + priv->mac_dev = base; + else if (strcmp(list, "rx_csr") == 0) + priv->sgdma_rx = base; + else if (strcmp(list, "tx_csr") == 0) + priv->sgdma_tx = base; + else if (strcmp(list, "s1") == 0) + desc_mem = base; + idx += 2; + list += (len + 1); + } + /* decode fifo depth */ + priv->rx_fifo_depth = fdtdec_get_int(blob, node, + "rx-fifo-depth", 0); + priv->tx_fifo_depth = fdtdec_get_int(blob, node, + "tx-fifo-depth", 0); + /* decode phy */ + addr = fdtdec_get_int(blob, node, + "phy-handle", 0); + addr = fdt_node_offset_by_phandle(blob, addr); + priv->phyaddr = fdtdec_get_int(blob, addr, + "reg", 0); + /* init desc */ + len = sizeof(struct alt_sgdma_descriptor) * 4; + if (!desc_mem) { + desc_mem = dma_alloc_coherent(len, &addr); + if (!desc_mem) + return -ENOMEM; + } + memset(desc_mem, 0, len); + priv->tx_desc = desc_mem; + priv->rx_desc = priv->tx_desc + 2; + /* allocate recv packet buffer */ + priv->rx_buf = malloc_cache_aligned(PKTSIZE_ALIGN); + if (!priv->rx_buf) + return -ENOMEM; - memset(dev, 0, sizeof *dev); + /* stop controller */ + debug("Reset TSE & SGDMAs\n"); + altera_tse_stop(dev); - priv = malloc(sizeof(*priv)); + /* start the phy */ + priv->interface = pdata->phy_interface; + tse_mdio_init(dev->name, priv); + priv->bus = miiphy_get_dev_by_name(dev->name); - if (!priv) { - free(dev); - return 0; - } - if (sgdma_desc_size) { - if (sgdma_desc_size < (sizeof(*tx_desc) * (3 + PKTBUFSRX))) { - printf("ALTERA_TSE-%hu: " - "descriptor memory is too small\n", dev_num); - free(priv); - free(dev); - return 0; - } - tx_desc = (struct alt_sgdma_descriptor *)sgdma_desc_base; - } else { - tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX), - &dma_handle); - } + ret = tse_phy_init(priv, dev); - rx_desc = tx_desc + 2; - debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc); - debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc); + return ret; +} - if (!tx_desc) { - free(priv); - free(dev); - return 0; +static int altera_tse_ofdata_to_platdata(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + const char *phy_mode; + + pdata->phy_interface = -1; + phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL); + if (phy_mode) + pdata->phy_interface = phy_get_interface_by_name(phy_mode); + if (pdata->phy_interface == -1) { + debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); + return -EINVAL; } - memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1)); - memset(tx_desc, 0, (sizeof *tx_desc) * 2); - - /* initialize tse priv */ - priv->mac_dev = (volatile struct alt_tse_mac *)mac_base; - priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base; - priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base; - priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR; - priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS; - priv->rx_desc = rx_desc; - priv->tx_desc = tx_desc; - - /* init eth structure */ - dev->priv = priv; - dev->init = tse_eth_init; - dev->halt = tse_eth_halt; - dev->send = tse_eth_send; - dev->recv = tse_eth_rx; - dev->write_hwaddr = tse_set_mac_address; - sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num); - - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) - miiphy_register(dev->name, altera_tse_miiphy_read, - altera_tse_miiphy_write); -#endif - - init_phy(dev); - - return 1; + + return 0; } + +static const struct eth_ops altera_tse_ops = { + .start = altera_tse_start, + .send = altera_tse_send, + .recv = altera_tse_recv, + .free_pkt = altera_tse_free_pkt, + .stop = altera_tse_stop, + .write_hwaddr = altera_tse_write_hwaddr, +}; + +static const struct udevice_id altera_tse_ids[] = { + { .compatible = "altr,tse-1.0", }, + { } +}; + +U_BOOT_DRIVER(altera_tse) = { + .name = "altera_tse", + .id = UCLASS_ETH, + .of_match = altera_tse_ids, + .ops = &altera_tse_ops, + .ofdata_to_platdata = altera_tse_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct eth_pdata), + .priv_auto_alloc_size = sizeof(struct altera_tse_priv), + .probe = altera_tse_probe, +}; diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h index 8880bfc0f8..08c4f660a0 100644 --- a/drivers/net/altera_tse.h +++ b/drivers/net/altera_tse.h @@ -13,102 +13,6 @@ #define __packed_1_ __attribute__ ((packed, aligned(1))) -/* PHY Stuff */ -#define miim_end -2 -#define miim_read -1 - -#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */ - -#ifndef CONFIG_SYS_TBIPA_VALUE -#define CONFIG_SYS_TBIPA_VALUE 0x1f -#endif -#define MIIMCFG_INIT_VALUE 0x00000003 -#define MIIMCFG_RESET 0x80000000 - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 - -#define MIIM_CONTROL 0x00 -#define MIIM_CONTROL_RESET 0x00009140 -#define MIIM_CONTROL_INIT 0x00001140 -#define MIIM_CONTROL_RESTART 0x00001340 -#define MIIM_ANEN 0x00001000 - -#define MIIM_CR 0x00 -#define MIIM_CR_RST 0x00008000 -#define MIIM_CR_INIT 0x00001000 - -#define MIIM_STATUS 0x1 -#define MIIM_STATUS_AN_DONE 0x00000020 -#define MIIM_STATUS_LINK 0x0004 - -#define MIIM_PHYIR1 0x2 -#define MIIM_PHYIR2 0x3 - -#define MIIM_ANAR 0x4 -#define MIIM_ANAR_INIT 0x1e1 - -#define MIIM_TBI_ANLPBPA 0x5 -#define MIIM_TBI_ANLPBPA_HALF 0x00000040 -#define MIIM_TBI_ANLPBPA_FULL 0x00000020 - -#define MIIM_TBI_ANEX 0x6 -#define MIIM_TBI_ANEX_NP 0x00000004 -#define MIIM_TBI_ANEX_PRX 0x00000002 - -#define MIIM_GBIT_CONTROL 0x9 -#define MIIM_GBIT_CONTROL_INIT 0xe00 - -#define MIIM_EXT_PAGE_ACCESS 0x1f - -/* 88E1011 PHY Status Register */ -#define MIIM_88E1011_PHY_STATUS 0x11 -#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 -#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 -#define MIIM_88E1011_PHYSTAT_100 0x4000 -#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 -#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800 -#define MIIM_88E1011_PHYSTAT_LINK 0x0400 - -#define MIIM_88E1011_PHY_SCR 0x10 -#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060 - -#define MIIM_88E1111_PHY_EXT_CR 0x14 -#define MIIM_88E1111_PHY_EXT_SR 0x1b - -/* 88E1111 PHY LED Control Register */ -#define MIIM_88E1111_PHY_LED_CONTROL 24 -#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 -#define MIIM_88E1111_PHY_LED_COMBINE 0x411C - -#define MIIM_READ_COMMAND 0x00000001 - -/* struct phy_info: a structure which defines attributes for a PHY - * id will contain a number which represents the PHY. During - * startup, the driver will poll the PHY to find out what its - * UID--as defined by registers 2 and 3--is. The 32-bit result - * gotten from the PHY will be shifted right by "shift" bits to - * discard any bits which may change based on revision numbers - * unimportant to functionality - * - * The struct phy_cmd entries represent pointers to an arrays of - * commands which tell the driver what to do to the PHY. - */ -struct phy_info { - uint id; - char *name; - uint shift; - /* Called to configure the PHY, and modify the controller - * based on the results */ - struct phy_cmd *config; - - /* Called when starting up the controller */ - struct phy_cmd *startup; - - /* Called when bringing down the controller */ - struct phy_cmd *shutdown; -}; - /* SGDMA Stuff */ #define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001) #define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002) @@ -116,18 +20,9 @@ struct phy_info { #define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008) #define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010) -#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001) -#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002) -#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004) -#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008) -#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010) #define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020) #define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040) -#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080) -#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00) #define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000) -#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000) -#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000) #define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \ | ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \ @@ -176,13 +71,13 @@ struct phy_info { * */ struct alt_sgdma_descriptor { - unsigned int *source; /* the address of data to be read. */ + unsigned int source; /* the address of data to be read. */ unsigned int source_pad; - unsigned int *destination; /* the address to write data */ + unsigned int destination; /* the address to write data */ unsigned int destination_pad; - unsigned int *next; /* the next descriptor in the list. */ + unsigned int next; /* the next descriptor in the list. */ unsigned int next_pad; unsigned short bytes_to_transfer; /* the number of bytes to transfer */ @@ -241,112 +136,15 @@ struct alt_sgdma_registers { #define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000) -#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000 -#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000 - -/* Command_Config Register Bit Definitions */ - -typedef volatile union __alt_tse_command_config { - unsigned int image; - struct { - unsigned int - transmit_enable:1, /* bit 0 */ - receive_enable:1, /* bit 1 */ - pause_frame_xon_gen:1, /* bit 2 */ - ethernet_speed:1, /* bit 3 */ - promiscuous_enable:1, /* bit 4 */ - pad_enable:1, /* bit 5 */ - crc_forward:1, /* bit 6 */ - pause_frame_forward:1, /* bit 7 */ - pause_frame_ignore:1, /* bit 8 */ - set_mac_address_on_tx:1, /* bit 9 */ - halfduplex_enable:1, /* bit 10 */ - excessive_collision:1, /* bit 11 */ - late_collision:1, /* bit 12 */ - software_reset:1, /* bit 13 */ - multicast_hash_mode_sel:1, /* bit 14 */ - loopback_enable:1, /* bit 15 */ - src_mac_addr_sel_on_tx:3, /* bit 18:16 */ - magic_packet_detect:1, /* bit 19 */ - sleep_mode_enable:1, /* bit 20 */ - wake_up_request:1, /* bit 21 */ - pause_frame_xoff_gen:1, /* bit 22 */ - control_frame_enable:1, /* bit 23 */ - payload_len_chk_disable:1, /* bit 24 */ - enable_10mbps_intf:1, /* bit 25 */ - rx_error_discard_enable:1, /* bit 26 */ - reserved_bits:4, /* bit 30:27 */ - self_clear_counter_reset:1; /* bit 31 */ - } __packed_1_ bits; -} __packed_1_ alt_tse_command_config; - -/* Tx_Cmd_Stat Register Bit Definitions */ - -typedef volatile union __alt_tse_tx_cmd_stat { - unsigned int image; - struct { - unsigned int reserved_lsbs:17, /* bit 16:0 */ - omit_crc:1, /* bit 17 */ - tx_shift16:1, /* bit 18 */ - reserved_msbs:13; /* bit 31:19 */ - - } __packed_1_ bits; -} alt_tse_tx_cmd_stat; - -/* Rx_Cmd_Stat Register Bit Definitions */ - -typedef volatile union __alt_tse_rx_cmd_stat { - unsigned int image; - struct { - unsigned int reserved_lsbs:25, /* bit 24:0 */ - rx_shift16:1, /* bit 25 */ - reserved_msbs:6; /* bit 31:26 */ - - } __packed_1_ bits; -} alt_tse_rx_cmd_stat; - -struct alt_tse_mdio { - unsigned int control; /*PHY device operation control register */ - unsigned int status; /*PHY device operation status register */ - unsigned int phy_id1; /*Bits 31:16 of PHY identifier. */ - unsigned int phy_id2; /*Bits 15:0 of PHY identifier. */ - unsigned int auto_negotiation_advertisement; - unsigned int remote_partner_base_page_ability; - - unsigned int reg6; - unsigned int reg7; - unsigned int reg8; - unsigned int reg9; - unsigned int rega; - unsigned int regb; - unsigned int regc; - unsigned int regd; - unsigned int rege; - unsigned int regf; - unsigned int reg10; - unsigned int reg11; - unsigned int reg12; - unsigned int reg13; - unsigned int reg14; - unsigned int reg15; - unsigned int reg16; - unsigned int reg17; - unsigned int reg18; - unsigned int reg19; - unsigned int reg1a; - unsigned int reg1b; - unsigned int reg1c; - unsigned int reg1d; - unsigned int reg1e; - unsigned int reg1f; -}; +#define ALT_TSE_SW_RESET_TIMEOUT (3 * CONFIG_SYS_HZ) +#define ALT_TSE_SGDMA_BUSY_TIMEOUT (3 * CONFIG_SYS_HZ) /* MAC register Space */ struct alt_tse_mac { unsigned int megacore_revision; unsigned int scratch_pad; - alt_tse_command_config command_config; + unsigned int command_config; unsigned int mac_addr_0; unsigned int mac_addr_1; unsigned int max_frame_length; @@ -413,8 +211,8 @@ struct alt_tse_mac { unsigned int reservedxE4; /*FIFO control register. */ - alt_tse_tx_cmd_stat tx_cmd_stat; - alt_tse_rx_cmd_stat rx_cmd_stat; + unsigned int tx_cmd_stat; + unsigned int rx_cmd_stat; unsigned int ipaccTxConf; unsigned int ipaccRxConf; @@ -425,8 +223,8 @@ struct alt_tse_mac { unsigned int hash_table[64]; /*Registers 0 to 31 within PHY device 0/1 */ - struct alt_tse_mdio mdio_phy0; - struct alt_tse_mdio mdio_phy1; + unsigned int mdio_phy0[0x20]; + unsigned int mdio_phy1[0x20]; /*4 Supplemental MAC Addresses */ unsigned int supp_mac_addr_0_0; @@ -441,52 +239,19 @@ struct alt_tse_mac { unsigned int reservedx320[56]; }; -/* flags: TSE MII modes */ -/* GMII/MII = 0 */ -/* RGMII = 1 */ -/* RGMII_ID = 2 */ -/* RGMII_TXID = 3 */ -/* RGMII_RXID = 4 */ -/* SGMII = 5 */ struct altera_tse_priv { - char devname[16]; - volatile struct alt_tse_mac *mac_dev; - volatile struct alt_sgdma_registers *sgdma_rx; - volatile struct alt_sgdma_registers *sgdma_tx; - unsigned int rx_sgdma_irq; - unsigned int tx_sgdma_irq; - unsigned int has_descriptor_mem; - unsigned int descriptor_mem_base; - unsigned int descriptor_mem_size; - volatile struct alt_sgdma_descriptor *rx_desc; - volatile struct alt_sgdma_descriptor *tx_desc; - volatile unsigned char *rx_buf; - struct phy_info *phyinfo; + struct alt_tse_mac *mac_dev; + struct alt_sgdma_registers *sgdma_rx; + struct alt_sgdma_registers *sgdma_tx; + unsigned int rx_fifo_depth; + unsigned int tx_fifo_depth; + struct alt_sgdma_descriptor *rx_desc; + struct alt_sgdma_descriptor *tx_desc; + unsigned char *rx_buf; unsigned int phyaddr; - unsigned int flags; - unsigned int link; - unsigned int duplexity; - unsigned int speed; + unsigned int interface; + struct phy_device *phydev; + struct mii_dev *bus; }; -/* Phy stuff continued */ -/* - * struct phy_cmd: A command for reading or writing a PHY register - * - * mii_reg: The register to read or write - * - * mii_data: For writes, the value to put in the register. - * A value of -1 indicates this is a read. - * - * funct: A function pointer which is invoked for each command. - * For reads, this function will be passed the value read - * from the PHY, and process it. - * For writes, the result of this function will be written - * to the PHY register - */ -struct phy_cmd { - uint mii_reg; - uint mii_data; - uint(*funct) (uint mii_reg, struct altera_tse_priv *priv); -}; #endif /* _ALTERA_TSE_H_ */ diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h index 8cff3ded1c..b38513e99b 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/nios2-generic.h @@ -33,6 +33,14 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 512 +/* + * MII/PHY + */ +#define CONFIG_CMD_MII 1 +#define CONFIG_PHY_GIGE 1 +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 +#define CONFIG_PHY_MARVELL 1 + /* * BOOTP options */