From: Masahiro Yamada Date: Fri, 8 Jan 2016 16:51:15 +0000 (+0900) Subject: ARM: uniphier: add dump command for DDR Multi PHY registers X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=93d92d46cd01fa1a885b9bff4c43e380dcbd0de4;p=u-boot.git ARM: uniphier: add dump command for DDR Multi PHY registers The ProXstream2/PH1-LD6b is integrated with a new IP for DDR PHY which is not register-compatible with the former SoCs. Add a new command to support the register dump of this IP. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 9e6ac3a0ff..03256be403 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -70,8 +70,17 @@ config CMD_PINMON config CMD_DDRPHY_DUMP bool "Enable dump command of DDR PHY parameters" + depends on ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_PRO4 || \ + ARCH_UNIPHIER_PH1_SLD8 help The command "ddrphy" shows the resulting parameters of DDR PHY training; it is useful for the evaluation of DDR PHY training. +config CMD_DDRMPHY_DUMP + bool "Enable dump command of DDR Multi PHY parameters" + depends on ARCH_UNIPHIER_PROXSTREAM2 || ARCH_UNIPHIER_PH1_LD6B + help + The command "ddrmphy" shows the resulting parameters of DDR Multi PHY + training; it is useful for the evaluation of DDR Multi PHY training. + endif diff --git a/arch/arm/mach-uniphier/cmd_ddrmphy.c b/arch/arm/mach-uniphier/cmd_ddrmphy.c new file mode 100644 index 0000000000..c18f099f2c --- /dev/null +++ b/arch/arm/mach-uniphier/cmd_ddrmphy.c @@ -0,0 +1,329 @@ +/* + * Copyright (C) 2015 Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +#include "../init.h" +#include "ddrmphy-regs.h" + +/* Select either decimal or hexadecimal */ +#if 1 +#define PRINTF_FORMAT "%2d" +#else +#define PRINTF_FORMAT "%02x" +#endif +/* field separator */ +#define FS " " + +static void __iomem *get_phy_base(int ch) +{ + return (void __iomem *)(0x5b830000 + ch * 0x00200000); +} + +static int get_nr_ch(void) +{ + const struct uniphier_board_data *bd = uniphier_get_board_param(); + + return bd->dram_ch2_width ? 3 : 2; +} + +static int get_nr_datx8(int ch) +{ + unsigned int width; + + const struct uniphier_board_data *bd = uniphier_get_board_param(); + + switch (ch) { + case 0: + width = bd->dram_ch0_width; + break; + case 1: + width = bd->dram_ch1_width; + break; + default: + width = bd->dram_ch2_width; + break; + } + + return width / 8; +} + +static void print_bdl(void __iomem *reg, int n) +{ + u32 val = readl(reg); + int i; + + for (i = 0; i < n; i++) + printf(FS PRINTF_FORMAT, (val >> i * 8) & 0x1f); +} + +static void dump_loop(void (*callback)(void __iomem *)) +{ + int ch, dx, nr_ch, nr_dx; + void __iomem *dx_base; + + nr_ch = get_nr_ch(); + + for (ch = 0; ch < nr_ch; ch++) { + dx_base = get_phy_base(ch) + DMPHY_DX_BASE; + nr_dx = get_nr_datx8(ch); + + for (dx = 0; dx < nr_dx; dx++) { + printf("CH%dDX%d:", ch, dx); + (*callback)(dx_base); + dx_base += DMPHY_DX_STRIDE; + printf("\n"); + } + } +} + +static void zq_dump(void) +{ + int ch, zq, nr_ch, nr_zq, i; + void __iomem *zq_base; + u32 dr, pr; + + printf("\n--- Impedance Data ---\n"); + printf(" ZPD ZPU OPD OPU ZDV ODV\n"); + + nr_ch = get_nr_ch(); + + for (ch = 0; ch < nr_ch; ch++) { + zq_base = get_phy_base(ch) + DMPHY_ZQ_BASE; + nr_zq = 3; + + for (zq = 0; zq < nr_zq; zq++) { + printf("CH%dZQ%d:", ch, zq); + + dr = readl(zq_base + DMPHY_ZQ_DR); + for (i = 0; i < 4; i++) { + printf(FS PRINTF_FORMAT, dr & 0x7f); + dr >>= 7; + } + + pr = readl(zq_base + DMPHY_ZQ_PR); + for (i = 0; i < 2; i++) { + printf(FS PRINTF_FORMAT, pr & 0xf); + pr >>= 4; + } + + zq_base += DMPHY_ZQ_STRIDE; + printf("\n"); + } + } +} + +static void __wbdl_dump(void __iomem *dx_base) +{ + print_bdl(dx_base + DMPHY_DX_BDLR0, 4); + print_bdl(dx_base + DMPHY_DX_BDLR1, 4); + print_bdl(dx_base + DMPHY_DX_BDLR2, 2); + + printf(FS "(+" PRINTF_FORMAT ")", + readl(dx_base + DMPHY_DX_LCDLR1) & 0xff); +} + +static void wbdl_dump(void) +{ + printf("\n--- Write Bit Delay Line ---\n"); + printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM DQS (WDQD)\n"); + + dump_loop(&__wbdl_dump); +} + +static void __rbdl_dump(void __iomem *dx_base) +{ + print_bdl(dx_base + DMPHY_DX_BDLR3, 4); + print_bdl(dx_base + DMPHY_DX_BDLR4, 4); + print_bdl(dx_base + DMPHY_DX_BDLR5, 1); + + printf(FS "(+" PRINTF_FORMAT ")", + (readl(dx_base + DMPHY_DX_LCDLR1) >> 8) & 0xff); + + printf(FS "(+" PRINTF_FORMAT ")", + (readl(dx_base + DMPHY_DX_LCDLR1) >> 16) & 0xff); +} + +static void rbdl_dump(void) +{ + printf("\n--- Read Bit Delay Line ---\n"); + printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM (RDQSD) (RDQSND)\n"); + + dump_loop(&__rbdl_dump); +} + +static void __wld_dump(void __iomem *dx_base) +{ + int rank; + u32 lcdlr0 = readl(dx_base + DMPHY_DX_LCDLR0); + u32 gtr = readl(dx_base + DMPHY_DX_GTR); + + for (rank = 0; rank < 4; rank++) { + u32 wld = (lcdlr0 >> (8 * rank)) & 0xff; /* Delay */ + u32 wlsl = (gtr >> (12 + 2 * rank)) & 0x3; /* System Latency */ + + printf(FS PRINTF_FORMAT "%sT", wld, + wlsl == 0 ? "-1" : wlsl == 1 ? "+0" : "+1"); + } +} + +static void wld_dump(void) +{ + printf("\n--- Write Leveling Delay ---\n"); + printf(" Rank0 Rank1 Rank2 Rank3\n"); + + dump_loop(&__wld_dump); +} + +static void __dqsgd_dump(void __iomem *dx_base) +{ + int rank; + u32 lcdlr2 = readl(dx_base + DMPHY_DX_LCDLR2); + u32 gtr = readl(dx_base + DMPHY_DX_GTR); + + for (rank = 0; rank < 4; rank++) { + u32 dqsgd = (lcdlr2 >> (8 * rank)) & 0xff; /* Delay */ + u32 dgsl = (gtr >> (3 * rank)) & 0x7; /* System Latency */ + + printf(FS PRINTF_FORMAT "+%dT", dqsgd, dgsl); + } +} + +static void dqsgd_dump(void) +{ + printf("\n--- DQS Gating Delay ---\n"); + printf(" Rank0 Rank1 Rank2 Rank3\n"); + + dump_loop(&__dqsgd_dump); +} + +static void __mdl_dump(void __iomem *dx_base) +{ + int i; + u32 mdl = readl(dx_base + DMPHY_DX_MDLR); + + for (i = 0; i < 3; i++) + printf(FS PRINTF_FORMAT, (mdl >> (8 * i)) & 0xff); +} + +static void mdl_dump(void) +{ + printf("\n--- Master Delay Line ---\n"); + printf(" IPRD TPRD MDLD\n"); + + dump_loop(&__mdl_dump); +} + +#define REG_DUMP(x) \ + { int ofst = DMPHY_ ## x; void __iomem *reg = phy_base + ofst; \ + printf("%3d: %-10s: %p : %08x\n", \ + ofst >> DMPHY_SHIFT, #x, reg, readl(reg)); } + +#define DX_REG_DUMP(dx, x) \ + { int ofst = DMPHY_DX_BASE + DMPHY_DX_STRIDE * (dx) + \ + DMPHY_DX_## x; \ + void __iomem *reg = phy_base + ofst; \ + printf("%3d: DX%d%-7s: %p : %08x\n", \ + ofst >> DMPHY_SHIFT, (dx), #x, reg, readl(reg)); } + +static void reg_dump(void) +{ + int ch, dx, nr_ch, nr_dx; + void __iomem *phy_base; + + printf("\n--- DDR PHY registers ---\n"); + + nr_ch = get_nr_ch(); + + for (ch = 0; ch < nr_ch; ch++) { + phy_base = get_phy_base(ch); + nr_dx = get_nr_datx8(ch); + + printf("== Ch%d ==\n", ch); + printf(" No: Name : Address : Data\n"); + + REG_DUMP(RIDR); + REG_DUMP(PIR); + REG_DUMP(PGCR0); + REG_DUMP(PGCR1); + REG_DUMP(PGCR2); + REG_DUMP(PGCR3); + REG_DUMP(PGSR0); + REG_DUMP(PGSR1); + REG_DUMP(PLLCR); + REG_DUMP(PTR0); + REG_DUMP(PTR1); + REG_DUMP(PTR2); + REG_DUMP(PTR3); + REG_DUMP(PTR4); + REG_DUMP(ACMDLR); + REG_DUMP(ACBDLR0); + REG_DUMP(DXCCR); + REG_DUMP(DSGCR); + REG_DUMP(DCR); + REG_DUMP(DTPR0); + REG_DUMP(DTPR1); + REG_DUMP(DTPR2); + REG_DUMP(DTPR3); + REG_DUMP(MR0); + REG_DUMP(MR1); + REG_DUMP(MR2); + REG_DUMP(MR3); + + for (dx = 0; dx < nr_dx; dx++) { + DX_REG_DUMP(dx, GCR0); + DX_REG_DUMP(dx, GCR1); + DX_REG_DUMP(dx, GCR2); + DX_REG_DUMP(dx, GCR3); + DX_REG_DUMP(dx, GTR); + } + } +} + +static int do_ddrm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char *cmd = argv[1]; + + if (argc == 1) + cmd = "all"; + + if (!strcmp(cmd, "zq") || !strcmp(cmd, "all")) + zq_dump(); + + if (!strcmp(cmd, "wbdl") || !strcmp(cmd, "all")) + wbdl_dump(); + + if (!strcmp(cmd, "rbdl") || !strcmp(cmd, "all")) + rbdl_dump(); + + if (!strcmp(cmd, "wld") || !strcmp(cmd, "all")) + wld_dump(); + + if (!strcmp(cmd, "dqsgd") || !strcmp(cmd, "all")) + dqsgd_dump(); + + if (!strcmp(cmd, "mdl") || !strcmp(cmd, "all")) + mdl_dump(); + + if (!strcmp(cmd, "reg") || !strcmp(cmd, "all")) + reg_dump(); + + return 0; +} + +U_BOOT_CMD( + ddrm, 2, 1, do_ddrm, + "UniPhier DDR PHY parameters dumper", + "- dump all of the followings\n" + "ddrm zq - dump Impedance Data\n" + "ddrm wbdl - dump Write Bit Delay\n" + "ddrm rbdl - dump Read Bit Delay\n" + "ddrm wld - dump Write Leveling\n" + "ddrm dqsgd - dump DQS Gating Delay\n" + "ddrm mdl - dump Master Delay Line\n" + "ddrm reg - dump registers\n" +); diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile index 4e7f122707..cab7df1653 100644 --- a/arch/arm/mach-uniphier/dram/Makefile +++ b/arch/arm/mach-uniphier/dram/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += umc-proxstream2.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += umc-proxstream2.o obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o +obj-$(CONFIG_CMD_DDRMPHY_DUMP) += cmd_ddrmphy.o