From: Ramon Fried Date: Sat, 27 Apr 2019 08:15:21 +0000 (+0300) Subject: drivers: pci_ep: Introduce UCLASS_PCI_EP uclass X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=914026d25848b856a669d629cb284c34843d707e;p=u-boot.git drivers: pci_ep: Introduce UCLASS_PCI_EP uclass Introduce new UCLASS_PCI_EP class for handling PCI endpoint devices, allowing to set various attributes of the PCI endpoint device, such as: * configuration space header * BAR definitions * outband memory mapping * start/stop PCI link Signed-off-by: Ramon Fried Reviewed-by: Simon Glass --- diff --git a/MAINTAINERS b/MAINTAINERS index bea3122f2b..e91684191f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -633,6 +633,12 @@ M: Simon Glass S: Maintained F: tools/patman/ +PCI Endpoint +M: Ramon Fried +S: Maintained +F: drivers/pci_endpoint/ +F: include/pci_ep.h + POWER M: Jaehoon Chung S: Maintained diff --git a/drivers/Kconfig b/drivers/Kconfig index 96ff4f566a..5a9d01b508 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -66,6 +66,8 @@ source "drivers/nvme/Kconfig" source "drivers/pci/Kconfig" +source "drivers/pci_endpoint/Kconfig" + source "drivers/pch/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 6635dabd2c..603aa98590 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_FPGA) += fpga/ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_NVME) += nvme/ +obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/ obj-y += pcmcia/ obj-y += dfu/ obj-$(CONFIG_PCH) += pch/ diff --git a/drivers/pci_endpoint/Kconfig b/drivers/pci_endpoint/Kconfig new file mode 100644 index 0000000000..ac4f43d1ab --- /dev/null +++ b/drivers/pci_endpoint/Kconfig @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# PCI Endpoint Support +# + +menu "PCI Endpoint" + +config PCI_ENDPOINT + bool "PCI Endpoint Support" + depends on DM + help + Enable this configuration option to support configurable PCI + endpoints. This should be enabled if the platform has a PCI + controllers that can operate in endpoint mode (as a device + connected to PCI host or bridge). + +endmenu diff --git a/drivers/pci_endpoint/Makefile b/drivers/pci_endpoint/Makefile new file mode 100644 index 0000000000..80a1066925 --- /dev/null +++ b/drivers/pci_endpoint/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2019 +# Ramon Fried + +obj-y += pci_ep-uclass.o diff --git a/drivers/pci_endpoint/pci_ep-uclass.c b/drivers/pci_endpoint/pci_ep-uclass.c new file mode 100644 index 0000000000..2f9c70398d --- /dev/null +++ b/drivers/pci_endpoint/pci_ep-uclass.c @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PCI Endpoint uclass + * + * Based on Linux PCI-EP driver written by + * Kishon Vijay Abraham I + * + * Copyright (c) 2019 + * Written by Ramon Fried + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int pci_ep_write_header(struct udevice *dev, uint fn, struct pci_ep_header *hdr) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->write_header) + return -ENOSYS; + + return ops->write_header(dev, fn, hdr); +} + +int pci_ep_read_header(struct udevice *dev, uint fn, struct pci_ep_header *hdr) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->read_header) + return -ENOSYS; + + return ops->read_header(dev, fn, hdr); +} + +int pci_ep_set_bar(struct udevice *dev, uint func_no, struct pci_bar *ep_bar) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + int flags = ep_bar->flags; + + /* Some basic bar validity checks */ + if (ep_bar->barno > BAR_5 || ep_bar < BAR_0) + return -EINVAL; + + if ((ep_bar->barno == BAR_5 && + (flags & PCI_BASE_ADDRESS_MEM_TYPE_64)) || + ((flags & PCI_BASE_ADDRESS_SPACE_IO) && + (flags & PCI_BASE_ADDRESS_IO_MASK)) || + (upper_32_bits(ep_bar->size) && + !(flags & PCI_BASE_ADDRESS_MEM_TYPE_64))) + return -EINVAL; + + if (!ops->set_bar) + return -ENOSYS; + + return ops->set_bar(dev, func_no, ep_bar); +} + +int pci_ep_read_bar(struct udevice *dev, uint func_no, struct pci_bar *ep_bar, + enum pci_barno barno) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + /* Some basic bar validity checks */ + if (barno > BAR_5 || barno < BAR_0) + return -EINVAL; + + if (!ops->read_bar) + return -ENOSYS; + + return ops->read_bar(dev, func_no, ep_bar, barno); +} + +int pci_ep_clear_bar(struct udevice *dev, uint func_num, enum pci_barno bar) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->clear_bar) + return -ENOSYS; + + return ops->clear_bar(dev, func_num, bar); +} + +int pci_ep_map_addr(struct udevice *dev, uint func_no, phys_addr_t addr, + u64 pci_addr, size_t size) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->map_addr) + return -ENOSYS; + + return ops->map_addr(dev, func_no, addr, pci_addr, size); +} + +int pci_ep_unmap_addr(struct udevice *dev, uint func_no, phys_addr_t addr) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->unmap_addr) + return -ENOSYS; + + return ops->unmap_addr(dev, func_no, addr); +} + +int pci_ep_set_msi(struct udevice *dev, uint func_no, uint interrupts) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + uint encode_int; + + if (interrupts > 32) + return -EINVAL; + + if (!ops->set_msi) + return -ENOSYS; + + /* MSI spec permits allocation of + * only 1, 2, 4, 8, 16, 32 interrupts + */ + encode_int = order_base_2(interrupts); + + return ops->set_msi(dev, func_no, encode_int); +} + +int pci_ep_get_msi(struct udevice *dev, uint func_no) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + int interrupt; + + if (!ops->get_msi) + return -ENOSYS; + + interrupt = ops->get_msi(dev, func_no); + + if (interrupt < 0) + return 0; + + /* Translate back from order base 2*/ + interrupt = 1 << interrupt; + + return interrupt; +} + +int pci_ep_set_msix(struct udevice *dev, uint func_no, uint interrupts) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (interrupts < 1 || interrupts > 2048) + return -EINVAL; + + if (!ops->set_msix) + return -ENOSYS; + + return ops->set_msix(dev, func_no, interrupts - 1); +} + +int pci_ep_get_msix(struct udevice *dev, uint func_no) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + int interrupt; + + if (!ops->get_msix) + return -ENOSYS; + + interrupt = ops->get_msix(dev, func_no); + + if (interrupt < 0) + return 0; + + return interrupt + 1; +} + +int pci_ep_raise_irq(struct udevice *dev, uint func_no, + enum pci_ep_irq_type type, uint interrupt_num) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->raise_irq) + return -ENOSYS; + + return ops->raise_irq(dev, func_no, type, interrupt_num); +} + +int pci_ep_start(struct udevice *dev) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->start) + return -ENOSYS; + + return ops->start(dev); +} + +int pci_ep_stop(struct udevice *dev) +{ + struct pci_ep_ops *ops = pci_ep_get_ops(dev); + + if (!ops->stop) + return -ENOSYS; + + return ops->stop(dev); +} + +UCLASS_DRIVER(pci_ep) = { + .id = UCLASS_PCI_EP, + .name = "pci_ep", + .flags = DM_UC_FLAG_SEQ_ALIAS, +}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 418392875c..5056a084d2 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -69,6 +69,7 @@ enum uclass_id { UCLASS_PANEL_BACKLIGHT, /* Backlight controller for panel */ UCLASS_PCH, /* x86 platform controller hub */ UCLASS_PCI, /* PCI bus */ + UCLASS_PCI_EP, /* PCI endpoint device */ UCLASS_PCI_GENERIC, /* Generic PCI bus device */ UCLASS_PHY, /* Physical Layer (PHY) device */ UCLASS_PINCONFIG, /* Pin configuration node device */ diff --git a/include/pci_ep.h b/include/pci_ep.h new file mode 100644 index 0000000000..00e8c6d8ab --- /dev/null +++ b/include/pci_ep.h @@ -0,0 +1,414 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Adapted from Linux kernel driver + * Copyright (C) 2017 Texas Instruments + * Author: Kishon Vijay Abraham I + * + * (C) Copyright 2019 + * Ramon Fried + */ + +#ifndef _PCI_EP_H +#define _PCI_EP_H + +#include + +/** + * enum pci_interrupt_pin - PCI INTx interrupt values + * @PCI_INTERRUPT_UNKNOWN: Unknown or unassigned interrupt + * @PCI_INTERRUPT_INTA: PCI INTA pin + * @PCI_INTERRUPT_INTB: PCI INTB pin + * @PCI_INTERRUPT_INTC: PCI INTC pin + * @PCI_INTERRUPT_INTD: PCI INTD pin + * + * Corresponds to values for legacy PCI INTx interrupts, as can be found in the + * PCI_INTERRUPT_PIN register. + */ +enum pci_interrupt_pin { + PCI_INTERRUPT_UNKNOWN, + PCI_INTERRUPT_INTA, + PCI_INTERRUPT_INTB, + PCI_INTERRUPT_INTC, + PCI_INTERRUPT_INTD, +}; + +enum pci_barno { + BAR_0, + BAR_1, + BAR_2, + BAR_3, + BAR_4, + BAR_5, +}; + +enum pci_ep_irq_type { + PCI_EP_IRQ_UNKNOWN, + PCI_EP_IRQ_LEGACY, + PCI_EP_IRQ_MSI, + PCI_EP_IRQ_MSIX, +}; + +/** + * struct pci_bar - represents the BAR (Base Address Register) of EP device + * @phys_addr: physical address that should be mapped to the BAR + * @size: the size of the address space present in BAR + * pci_barno: number of pci BAR to set (0..5) + * @flags: BAR access flags + */ +struct pci_bar { + dma_addr_t phys_addr; + size_t size; + enum pci_barno barno; + int flags; +}; + +/** + * struct pci_ep_header - represents standard configuration header + * @vendorid: identifies device manufacturer + * @deviceid: identifies a particular device + * @revid: specifies a device-specific revision identifier + * @progif_code: identifies a specific register-level programming interface + * @subclass_code: identifies more specifically the function of the device + * @baseclass_code: broadly classifies the type of function the device performs + * @cache_line_size: specifies the system cacheline size in units of DWORDs + * @subsys_vendor_id: vendor of the add-in card or subsystem + * @subsys_id: id specific to vendor + * @interrupt_pin: interrupt pin the device (or device function) uses + */ +struct pci_ep_header { + u16 vendorid; + u16 deviceid; + u8 revid; + u8 progif_code; + u8 subclass_code; + u8 baseclass_code; + u8 cache_line_size; + u16 subsys_vendor_id; + u16 subsys_id; + enum pci_interrupt_pin interrupt_pin; +}; + +/* PCI endpoint operations */ +struct pci_ep_ops { + /** + * write_header() - Write a PCI configuration space header + * + * @dev: device to write to + * @func_num: EP function to fill + * @hdr: header to write + * @return 0 if OK, -ve on error + */ + int (*write_header)(struct udevice *dev, uint func_num, + struct pci_ep_header *hdr); + /** + * read_header() - Read a PCI configuration space header + * + * @dev: device to write to + * @func_num: EP function to fill + * @hdr: header to read to + * @return 0 if OK, -ve on error + */ + int (*read_header)(struct udevice *dev, uint func_num, + struct pci_ep_header *hdr); + /** + * set_bar() - Set BAR (Base Address Register) properties + * + * @dev: device to set + * @func_num: EP function to set + * @bar: bar data + * @return 0 if OK, -ve on error + */ + int (*set_bar)(struct udevice *dev, uint func_num, + struct pci_bar *bar); + /** + * read_bar() - Read BAR (Base Address Register) properties + * + * @dev: device to read + * @func_num: EP function to read + * @bar: struct to copy data to + * @barno: bar number to read + * @return 0 if OK, -ve on error + */ + int (*read_bar)(struct udevice *dev, uint func_num, + struct pci_bar *bar, enum pci_barno barno); + /** + * clear_bar() - clear BAR (Base Address Register) + * + * @dev: device to clear + * @func_num: EP function to clear + * @bar: bar number + * @return 0 if OK, -ve on error + */ + int (*clear_bar)(struct udevice *dev, uint func_num, + enum pci_barno bar); + /** + * map_addr() - map CPU address to PCI address + * + * outband region is used in order to generate PCI read/write + * transaction from local memory/write. + * + * @dev: device to set + * @func_num: EP function to set + * @addr: local physical address base + * @pci_addr: pci address to translate to + * @size: region size + * @return 0 if OK, -ve on error + */ + int (*map_addr)(struct udevice *dev, uint func_num, + phys_addr_t addr, u64 pci_addr, size_t size); + /** + * unmap_addr() - unmap CPU address to PCI address + * + * unmap previously mapped region. + * + * @dev: device to set + * @func_num: EP function to set + * @addr: local physical address base + * @return 0 if OK, -ve on error + */ + int (*unmap_addr)(struct udevice *dev, uint func_num, + phys_addr_t addr); + /** + * set_msi() - set msi capability property + * + * set the number of required MSI vectors the device + * needs for operation. + * + * @dev: device to set + * @func_num: EP function to set + * @interrupts: required interrupts count + * @return 0 if OK, -ve on error + */ + int (*set_msi)(struct udevice *dev, uint func_num, uint interrupts); + + /** + * get_msi() - get the number of MSI interrupts allocated by the host. + * + * Read the Multiple Message Enable bitfield from + * Message control register. + * + * @dev: device to use + * @func_num: EP function to use + * @return msi count if OK, -EINVAL if msi were not enabled at host. + */ + int (*get_msi)(struct udevice *dev, uint func_num); + + /** + * set_msix() - set msix capability property + * + * set the number of required MSIx vectors the device + * needs for operation. + * + * @dev: device to set + * @func_num: EP function to set + * @interrupts: required interrupts count + * @return 0 if OK, -ve on error + */ + int (*set_msix)(struct udevice *dev, uint func_num, + uint interrupts); + + /** + * get_msix() - get the number of MSIx interrupts allocated by the host. + * + * Read the Multiple Message Enable bitfield from + * Message control register. + * + * @dev: device to use + * @func_num: EP function to use + * @return msi count if OK, -EINVAL if msi were not enabled at host. + */ + int (*get_msix)(struct udevice *dev, uint func_num); + + /** + * raise_irq() - raise a legacy, MSI or MSI-X interrupt + * + * @dev: device to set + * @func_num: EP function to set + * @type: type of irq to send + * @interrupt_num: interrupt vector to use + * @return 0 if OK, -ve on error + */ + int (*raise_irq)(struct udevice *dev, uint func_num, + enum pci_ep_irq_type type, uint interrupt_num); + /** + * start() - start the PCI link + * + * @dev: device to set + * @return 0 if OK, -ve on error + */ + int (*start)(struct udevice *dev); + + /** + * stop() - stop the PCI link + * + * @dev: device to set + * @return 0 if OK, -ve on error + */ + int (*stop)(struct udevice *dev); +}; + +#define pci_ep_get_ops(dev) ((struct pci_ep_ops *)(dev)->driver->ops) + +/** + * pci_ep_write_header() - Write a PCI configuration space header + * + * @dev: device to write to + * @func_num: EP function to fill + * @hdr: header to write + * @return 0 if OK, -ve on error + */ +int pci_ep_write_header(struct udevice *dev, uint func_num, + struct pci_ep_header *hdr); + +/** + * dm_pci_ep_read_header() - Read a PCI configuration space header + * + * @dev: device to write to + * @func_num: EP function to fill + * @hdr: header to read to + * @return 0 if OK, -ve on error + */ +int pci_ep_read_header(struct udevice *dev, uint func_num, + struct pci_ep_header *hdr); +/** + * pci_ep_set_bar() - Set BAR (Base Address Register) properties + * + * @dev: device to set + * @func_num: EP function to set + * @bar: bar data + * @return 0 if OK, -ve on error + */ +int pci_ep_set_bar(struct udevice *dev, uint func_num, struct pci_bar *bar); + +/** + * pci_ep_read_bar() - Read BAR (Base Address Register) properties + * + * @dev: device to read + * @func_num: EP function to read + * @bar: struct to copy data to + * @barno: bar number to read + * @return 0 if OK, -ve on error + */ +int pci_ep_read_bar(struct udevice *dev, uint func_no, struct pci_bar *ep_bar, + enum pci_barno barno); + +/** + * pci_ep_clear_bar() - Clear BAR (Base Address Register) + * mark the BAR as empty so host won't map it. + * @dev: device to clear + * @func_num: EP function to clear + * @bar: bar number + * @return 0 if OK, -ve on error + */ +int pci_ep_clear_bar(struct udevice *dev, uint func_num, enum pci_barno bar); +/** + * pci_ep_map_addr() - map CPU address to PCI address + * + * outband region is used in order to generate PCI read/write + * transaction from local memory/write. + * + * @dev: device to set + * @func_num: EP function to set + * @addr: local physical address base + * @pci_addr: pci address to translate to + * @size: region size + * @return 0 if OK, -ve on error + */ +int pci_ep_map_addr(struct udevice *dev, uint func_num, phys_addr_t addr, + u64 pci_addr, size_t size); +/** + * pci_ep_unmap_addr() - unmap CPU address to PCI address + * + * unmap previously mapped region. + * + * @dev: device to set + * @func_num: EP function to set + * @addr: local physical address base + * @return 0 if OK, -ve on error + */ +int pci_ep_unmap_addr(struct udevice *dev, uint func_num, phys_addr_t addr); + +/** + * pci_ep_set_msi() - set msi capability property + * + * set the number of required MSI vectors the device + * needs for operation. + * + * @dev: device to set + * @func_num: EP function to set + * @interrupts: required interrupts count + * @return 0 if OK, -ve on error + */ +int pci_ep_set_msi(struct udevice *dev, uint func_num, uint interrupts); + +/** + * pci_ep_get_msi() - get the number of MSI interrupts allocated by the host. + * + * Read the Multiple Message Enable bitfield from + * Message control register. + * + * @dev: device to use + * @func_num: EP function to use + * @return msi count if OK, -EINVAL if msi were not enabled at host. + */ +int pci_ep_get_msi(struct udevice *dev, uint func_num); + +/** + * pci_ep_set_msix() - set msi capability property + * + * set the number of required MSIx vectors the device + * needs for operation. + * + * @dev: device to set + * @func_num: EP function to set + * @interrupts: required interrupts count + * @return 0 if OK, -ve on error + */ +int pci_ep_set_msix(struct udevice *dev, uint func_num, uint interrupts); + +/** + * pci_ep_get_msix() - get the number of MSIx interrupts allocated by the host. + * + * Read the Multiple Message Enable bitfield from + * Message control register. + * + * @dev: device to use + * @func_num: EP function to use + * @return msi count if OK, -EINVAL if msi were not enabled at host. + */ +int pci_ep_get_msix(struct udevice *dev, uint func_num); + +/** + * pci_ep_raise_irq() - raise a legacy, MSI or MSI-X interrupt + * + * @dev: device to set + * @func_num: EP function to set + * @type: type of irq to send + * @interrupt_num: interrupt vector to use + * @return 0 if OK, -ve on error + */ +int pci_ep_raise_irq(struct udevice *dev, uint func_num, + enum pci_ep_irq_type type, uint interrupt_num); +/** + * pci_ep_start() - start the PCI link + * + * Enable PCI endpoint device and start link + * process. + * + * @dev: device to set + * @return 0 if OK, -ve on error + */ +int pci_ep_start(struct udevice *dev); + +/** + * pci_ep_stop() - stop the PCI link + * + * Disable PCI endpoint device and stop + * link. + * + * @dev: device to set + * @return 0 if OK, -ve on error + */ +int pci_ep_stop(struct udevice *dev); + +#endif