From: Marek Vasut Date: Sat, 5 Dec 2015 20:07:23 +0000 (+0100) Subject: arm: socfpga: Introduce common board code X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=8e535af2e441030f5e4b940a3756a0d92646b5fe;p=u-boot.git arm: socfpga: Introduce common board code The SoCFPGA has reached a point where every single board code become the same, since each and every single board is probed equally from OF. Move the common board code into arch/arm/mach-socfpga/ . Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen --- diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index 316b326d41..5cf9e23e2b 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -8,7 +8,7 @@ # obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \ - fpga_manager.o scan_manager.o + fpga_manager.o scan_manager.o board.o obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o # QTS-generated config file wrappers diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c new file mode 100644 index 0000000000..a41d0899d7 --- /dev/null +++ b/arch/arm/mach-socfpga/board.c @@ -0,0 +1,64 @@ +/* + * Altera SoCFPGA common board code + * + * Copyright (C) 2015 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void s_init(void) {} + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + /* Address of boot parameters for ATAG (if ATAG is used) */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +#ifdef CONFIG_USB_GADGET +struct dwc2_plat_otg_data socfpga_otg_data = { + .usb_gusbcfg = 0x1417, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + int node[2], count; + fdt_addr_t addr; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", + COMPAT_ALTERA_SOCFPGA_DWC2USB, + node, 2); + if (count <= 0) /* No controller found. */ + return 0; + + addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); + if (addr == FDT_ADDR_T_NONE) { + printf("UDC Controller has no 'reg' property!\n"); + return -EINVAL; + } + + /* Patch the address from OF into the controller pdata. */ + socfpga_otg_data.regs_otg = addr; + + return dwc2_udc_probe(&socfpga_otg_data); +} + +int g_dnl_board_usb_cable_connected(void) +{ + return 1; +} +#endif