From: Claudiu Beznea Date: Tue, 19 Jan 2021 11:26:46 +0000 (+0200) Subject: net: macb: add support for sama7g5 gmac X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=8c0483ecbf6d251f2d12e9728ee142b29510fb4c;p=u-boot.git net: macb: add support for sama7g5 gmac Add support for SAMA7G5 GMAC. Signed-off-by: Claudiu Beznea --- diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 80ed58d4b9..e87ffd9be3 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -595,6 +595,23 @@ static int macb_sifive_clk_init(struct udevice *dev, ulong rate) return 0; } +static int macb_sama7g5_clk_init(struct udevice *dev, ulong rate) +{ + struct clk clk; + int ret; + + ret = clk_get_by_name(dev, "tx_clk", &clk); + if (ret) + return ret; + + /* + * This is for using GCK. Clock rate is addressed via assigned-clock + * property, so only clock enable is needed here. The switching to + * proper clock rate depending on link speed is managed by IP logic. + */ + return clk_enable(&clk); +} + int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed) { #ifdef CONFIG_CLK @@ -1430,6 +1447,13 @@ static int macb_eth_of_to_plat(struct udevice *dev) return macb_late_eth_of_to_plat(dev); } +static const struct macb_usrio_cfg sama7g5_usrio = { + .mii = 0, + .rmii = 1, + .rgmii = 2, + .clken = BIT(2), +}; + static const struct macb_config microchip_config = { .dma_burst_length = 16, .hw_dma_cap = HW_DMA_CAP_64B, @@ -1451,10 +1475,19 @@ static const struct macb_config sifive_config = { .usrio = &macb_default_usrio, }; +static const struct macb_config sama7g5_gmac_config = { + .dma_burst_length = 16, + .hw_dma_cap = HW_DMA_CAP_32B, + .clk_init = macb_sama7g5_clk_init, + .usrio = &sama7g5_usrio, +}; + static const struct udevice_id macb_eth_ids[] = { { .compatible = "cdns,macb" }, { .compatible = "cdns,at91sam9260-macb" }, { .compatible = "cdns,sam9x60-macb" }, + { .compatible = "cdns,sama7g5-gem", + .data = (ulong)&sama7g5_gmac_config }, { .compatible = "atmel,sama5d2-gem" }, { .compatible = "atmel,sama5d3-gem" }, { .compatible = "atmel,sama5d4-gem", .data = (ulong)&sama5d4_config },