From: Tom Rini Date: Mon, 13 Sep 2021 00:32:28 +0000 (-0400) Subject: Convert CONFIG_OMAP_EHCI_PHY1_RESET_GPIO et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=899867a28a86a0c6142337c060a546def16963a3;p=u-boot.git Convert CONFIG_OMAP_EHCI_PHY1_RESET_GPIO et al to Kconfig This converts the following to Kconfig: CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO To do this, we also introduce CONFIG_HAS_CONFIG_OMAP_EHCI_PHYn_RESET_GPIO options to get setting the GPIO number. Signed-off-by: Tom Rini --- diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 1234aa2251..864d16cf01 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -77,6 +77,8 @@ CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_HAS_OMAP_EHCI_PHY1_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY1_RESET_GPIO=57 CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_AM35X=y CONFIG_BCH=y diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index 4e31f77049..9f3a88f28e 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -82,6 +82,8 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y # CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y +CONFIG_HAS_OMAP_EHCI_PHY1_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY1_RESET_GPIO=4 CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_OMAP2PLUS=y CONFIG_TWL4030_USB=y diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index 89b2bff592..578e6829ff 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -84,6 +84,8 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y # CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y +CONFIG_HAS_OMAP_EHCI_PHY1_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY1_RESET_GPIO=147 CONFIG_USB_OMAP3=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_MUSB_OMAP2PLUS=y diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index 96f9c6bcaa..7a78682bf6 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -83,6 +83,8 @@ CONFIG_OMAP3_SPI=y CONFIG_USB=y # CONFIG_SPL_DM_USB is not set CONFIG_USB_EHCI_HCD=y +CONFIG_HAS_OMAP_EHCI_PHY1_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY1_RESET_GPIO=4 CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_OMAP2PLUS=y CONFIG_TWL4030_USB=y diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig index 687e3865e7..8c6baaf4fd 100644 --- a/configs/omap4_panda_defconfig +++ b/configs/omap4_panda_defconfig @@ -40,6 +40,10 @@ CONFIG_CONS_INDEX=3 CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_HAS_OMAP_EHCI_PHY1_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY1_RESET_GPIO=1 +CONFIG_HAS_OMAP_EHCI_PHY2_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY2_RESET_GPIO=62 CONFIG_USB_OMAP3=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_SMSC95XX=y diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index 0436463e08..0280b4ac8d 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -49,6 +49,10 @@ CONFIG_CONS_INDEX=3 CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_HAS_OMAP_EHCI_PHY2_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY2_RESET_GPIO=80 +CONFIG_HAS_OMAP_EHCI_PHY3_RESET_GPIO=y +CONFIG_OMAP_EHCI_PHY3_RESET_GPIO=79 CONFIG_USB_DWC3=y CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_PHY_OMAP=y diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index e04cf9411a..10b0479a8a 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -183,6 +183,40 @@ config USB_EHCI_OMAP Enables support for the on-chip EHCI controller on OMAP3 and later SoCs. +if USB_EHCI_OMAP + +config HAS_OMAP_EHCI_PHY1_RESET_GPIO + bool "PHY #1 requires a GPIO hold to it in RESET while PHY settles" + help + Enable this to be able to configure the GPIO number used to hold the + PHY in RESET for enough time until the PHY is settled and ready. + +config OMAP_EHCI_PHY1_RESET_GPIO + int "GPIO number to hold PHY #1 in RESET" + depends on HAS_OMAP_EHCI_PHY1_RESET_GPIO + +config HAS_OMAP_EHCI_PHY2_RESET_GPIO + bool "PHY #2 requires a GPIO hold to it in RESET while PHY settles" + help + Enable this to be able to configure the GPIO number used to hold the + PHY in RESET for enough time until the PHY is settled and ready. + +config OMAP_EHCI_PHY2_RESET_GPIO + int "GPIO number to hold PHY #2 in RESET" + depends on HAS_OMAP_EHCI_PHY2_RESET_GPIO + +config HAS_OMAP_EHCI_PHY3_RESET_GPIO + bool "PHY #3 requires a GPIO hold to it in RESET while PHY settles" + help + Enable this to be able to configure the GPIO number used to hold the + PHY in RESET for enough time until the PHY is settled and ready. + +config OMAP_EHCI_PHY3_RESET_GPIO + int "GPIO number to hold PHY #3 in RESET" + depends on HAS_OMAP_EHCI_PHY3_RESET_GPIO + +endif + config USB_EHCI_VF bool "Support for Vybrid on-chip EHCI USB controller" depends on ARCH_VF610 diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index edfd890767..9b56e2101c 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -23,8 +23,6 @@ */ #ifdef CONFIG_SPL_BUILD #undef CONFIG_USB_EHCI_OMAP -#else -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 #endif /* I2C */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 5d300b13f3..265b1e2197 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -41,9 +41,6 @@ #endif /* CONFIG_SPL_OS_BOOT */ #endif /* CONFIG_MTD_RAW_NAND */ -/* USB EHCI */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147 - /* Enable Multi Bus support for I2C */ #define CONFIG_I2C_MULTI_BUS diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 886f2e9d86..89ffdef287 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -27,9 +27,6 @@ #ifdef CONFIG_SPL_BUILD #undef CONFIG_USB_EHCI_OMAP #endif -#ifdef CONFIG_USB_EHCI_OMAP -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 4 -#endif /* Board NAND Info. */ #ifdef CONFIG_MTD_RAW_NAND diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 14eb363816..5320dffe55 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -16,8 +16,6 @@ */ /* USB UHH support options */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 /* USB Networking options */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index a1f1dafad7..188ab0bf36 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -43,9 +43,6 @@ /* USB UHH support options */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 -#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 - /* Enabled commands */ /* USB Networking options */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 166b8397ad..adbc2ae0c5 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -43,8 +43,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -/* EHCI */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07