From: Graeme Russ <graeme.russ@gmail.com>
Date: Fri, 23 Apr 2010 14:05:58 +0000 (+1000)
Subject: eNET: Implement eNET Watchdog
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=880c59e5add3681bd4dca14d2fd20152bee7ad14;p=u-boot.git

eNET: Implement eNET Watchdog

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
---

diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
index ad71f7e5dc..7f0e2577f1 100644
--- a/board/eNET/eNET.c
+++ b/board/eNET/eNET.c
@@ -45,6 +45,9 @@ DECLARE_GLOBAL_DATA_PTR;
 
 unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
 
+static void enet_timer_isr(void);
+static void enet_toggle_run_led(void);
+
 void init_sc520_enet (void)
 {
 	/* Set CPU Speed to 100MHz */
@@ -160,6 +163,10 @@ int last_stage_init(void)
 
 	major = minor = 0;
 
+	outb(0x00, LED_LATCH_ADDRESS);
+
+	register_timer_isr (enet_timer_isr);
+
 	printf("Serck Controls eNET\n");
 
 	return 0;
@@ -218,3 +225,41 @@ void setup_pcat_compatibility()
 	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
 	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
 }
+
+void enet_timer_isr(void)
+{
+	static long enet_ticks = 0;
+
+	enet_ticks++;
+
+	/* Toggle Watchdog every 100ms */
+	if ((enet_ticks % 100) == 0)
+		hw_watchdog_reset();
+
+	/* Toggle Run LED every 500ms */
+	if ((enet_ticks % 500) == 0)
+		enet_toggle_run_led();
+}
+
+void hw_watchdog_reset(void)
+{
+	/* Watchdog Reset must be atomic */
+	long flag = disable_interrupts();
+
+	if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT)
+		sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT;
+	else
+		sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT;
+
+	if (flag)
+		enable_interrupts();
+}
+
+void enet_toggle_run_led(void)
+{
+	unsigned char leds_state= inb(LED_LATCH_ADDRESS);
+	if (leds_state & LED_RUN_BITMASK)
+		outb(leds_state &~ LED_RUN_BITMASK, LED_LATCH_ADDRESS);
+	else
+		outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS);
+}
diff --git a/board/eNET/hardware.h b/board/eNET/hardware.h
index 42474a62fa..dec2cd8040 100644
--- a/board/eNET/hardware.h
+++ b/board/eNET/hardware.h
@@ -31,5 +31,6 @@
 #define LED_RX_BITMASK		0x08
 #define LED_TX_BITMASK		0x10
 #define LED_ERR_BITMASK		0x20
+#define WATCHDOG_PIO_BIT	0x8000
 
 #endif /* HARDWARE_H_ */
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 61897949dd..361fe61b04 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -53,7 +53,7 @@
  * bottom (processor) board MUST be removed!
  */
 #undef CONFIG_WATCHDOG
-#undef CONFIG_HW_WATCHDOG
+#define CONFIG_HW_WATCHDOG
 
  /*-----------------------------------------------------------------------
   * Serial Configuration
@@ -233,14 +233,6 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_RTL8139
 
-/*-----------------------------------------------------------------------
- * Hardware watchdog configuration
- */
-#define CONFIG_SYS_WATCHDOG_PIO_BIT  		0x8000
-#define CONFIG_SYS_WATCHDIG_PIO_DATA 		SC520_PIODATA15_0
-#define CONFIG_SYS_WATCHDIG_PIO_CLR  		SC520_PIOCLR15_0
-#define CONFIG_SYS_WATCHDIG_PIO_SET  		SC520_PIOSET15_0
-
 /*-----------------------------------------------------------------------
  * FPGA configuration
  */