From: Aswath Govindraju Date: Wed, 24 Apr 2024 07:39:11 +0000 (+0530) Subject: usb: cdns3: gadget.c: Set fast access bit X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=83eed2cba32ad8c683bd42e0ad5426589f630bd2;p=u-boot.git usb: cdns3: gadget.c: Set fast access bit When the device port is in a low power state [U3/L2/Not Connected], accesses to usb device registers may take a long time. This could lead to potential core hang when the controller registers are accessed after the port is disabled by setting DEVDS field. Setting the fast register access bit ensures that the PHY clock is keeping up in active state. Therefore, set fast access bit to ensure the accesses to device registers are quick even in low power states. commit b5148d946f45 ("usb: cdns3: gadget: set fast access bit") in the upstream kernel is taken as reference. Signed-off-by: Aswath Govindraju Signed-off-by: Ravi Gunasekaran Reviewed-by: Roger Quadros Reviewed-by: Marek Vasut Reviewed-by: Mattijs Korpershoek Link: https://lore.kernel.org/r/20240424073911.1943-1-r-gunasekaran@ti.com Signed-off-by: Mattijs Korpershoek --- diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 7aa0c6b2be..d11175dc5b 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -2325,6 +2325,9 @@ static void cdns3_gadget_config(struct cdns3_device *priv_dev) writel(USB_IEN_INIT, ®s->usb_ien); writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, ®s->usb_conf); + /* Set the Fast access bit */ + writel(PUSB_PWR_FST_REG_ACCESS, &priv_dev->regs->usb_pwr); + cdns3_configure_dmult(priv_dev, NULL); cdns3_gadget_pullup(&priv_dev->gadget, 1); @@ -2383,6 +2386,7 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) /* disable interrupt for device */ writel(0, &priv_dev->regs->usb_ien); + writel(0, &priv_dev->regs->usb_pwr); writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); return ret;