From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 19 Oct 2017 09:36:35 +0000 (+0200)
Subject: sunxi: binman: Add U-Boot binary size check
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=819f1e081c527d2d02cdaeec0027384688cf5de0;p=u-boot.git

sunxi: binman: Add U-Boot binary size check

The U-Boot binary may trip over its actual allocated size in the storage.
In such a case, the environment will not be readable anymore (because
corrupted when the new image was flashed), and any attempt at using saveenv
to reconstruct the environment will result in a corrupted U-Boot binary.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---

diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi
index 5adfd9bca2..72e95afd78 100644
--- a/arch/arm/dts/sunxi-u-boot.dtsi
+++ b/arch/arm/dts/sunxi-u-boot.dtsi
@@ -1,5 +1,14 @@
 #include <config.h>
 
+/*
+ * This is the maximum size the U-Boot binary can be, which is basically
+ * the start of the environment, minus the start of the U-Boot binary in
+ * the MMC. This makes the assumption that the MMC is using 512-bytes
+ * blocks, but devices using something other than that remains to be
+ * seen.
+ */
+#define UBOOT_MMC_MAX_SIZE	(CONFIG_ENV_OFFSET - (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512))
+
 / {
 	binman {
 		filename = "u-boot-sunxi-with-spl.bin";
@@ -8,6 +17,9 @@
 			filename = "spl/sunxi-spl.bin";
 		};
 		u-boot-img {
+#ifdef CONFIG_MMC
+			size = <UBOOT_MMC_MAX_SIZE>;
+#endif
 			pos = <CONFIG_SPL_PAD_TO>;
 		};
 	};