From: Phil Edworthy Date: Tue, 29 Nov 2016 12:58:31 +0000 (+0000) Subject: spi: cadence_qspi: Use spi mode at the point it is needed X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=7d403f284c814d6df9f1d116e691d6468c75282a;p=u-boot.git spi: cadence_qspi: Use spi mode at the point it is needed Instead of extracting mode settings and passing them as separate args to another function, just pass the SPI mode as an arg. Signed-off-by: Phil Edworthy Reviewed-by: Jagan Teki --- diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c index 1051afb74c..55192d6d49 100644 --- a/drivers/spi/cadence_qspi.c +++ b/drivers/spi/cadence_qspi.c @@ -170,14 +170,12 @@ static int cadence_spi_probe(struct udevice *bus) static int cadence_spi_set_mode(struct udevice *bus, uint mode) { struct cadence_spi_priv *priv = dev_get_priv(bus); - unsigned int clk_pol = (mode & SPI_CPOL) ? 1 : 0; - unsigned int clk_pha = (mode & SPI_CPHA) ? 1 : 0; /* Disable QSPI */ cadence_qspi_apb_controller_disable(priv->regbase); /* Set SPI mode */ - cadence_qspi_apb_set_clk_mode(priv->regbase, clk_pol, clk_pha); + cadence_qspi_apb_set_clk_mode(priv->regbase, mode); /* Enable QSPI */ cadence_qspi_apb_controller_enable(priv->regbase); diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h index a849f7b199..d1927a4003 100644 --- a/drivers/spi/cadence_qspi.h +++ b/drivers/spi/cadence_qspi.h @@ -63,8 +63,7 @@ int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat, void cadence_qspi_apb_chipselect(void *reg_base, unsigned int chip_select, unsigned int decoder_enable); -void cadence_qspi_apb_set_clk_mode(void *reg_base_addr, - unsigned int clk_pol, unsigned int clk_pha); +void cadence_qspi_apb_set_clk_mode(void *reg_base, uint mode); void cadence_qspi_apb_config_baudrate_div(void *reg_base, unsigned int ref_clk_hz, unsigned int sclk_hz); void cadence_qspi_apb_delay(void *reg_base, diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index 634a8578e0..e81d678008 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -294,8 +294,7 @@ void cadence_qspi_apb_config_baudrate_div(void *reg_base, return; } -void cadence_qspi_apb_set_clk_mode(void *reg_base, - unsigned int clk_pol, unsigned int clk_pha) +void cadence_qspi_apb_set_clk_mode(void *reg_base, uint mode) { unsigned int reg; @@ -303,9 +302,9 @@ void cadence_qspi_apb_set_clk_mode(void *reg_base, reg = readl(reg_base + CQSPI_REG_CONFIG); reg &= ~(CQSPI_REG_CONFIG_CLK_POL | CQSPI_REG_CONFIG_CLK_PHA); - if (clk_pol) + if (mode & SPI_CPOL) reg |= CQSPI_REG_CONFIG_CLK_POL; - if (clk_pha) + if (mode & SPI_CPHA) reg |= CQSPI_REG_CONFIG_CLK_PHA; writel(reg, reg_base + CQSPI_REG_CONFIG);