From: Breno Lima Date: Fri, 25 Nov 2016 18:56:57 +0000 (-0200) Subject: mx6sx: Add initial support for UDOO Neo Board X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=792f186846672140deca7dfbf2f20aece26b5348;p=u-boot.git mx6sx: Add initial support for UDOO Neo Board UDOO Neo Board is a development board from Seco that has three models: - UDOO Neo Basic - UDOO Neo Basic Kick Starter - UDOO Neo Extended - UDOO Neo Full All versions are based on the i.MX6 SoloX processor. For more details about the UDOO Neo board, please refer to: http://www.udoo.org/udoo-neo/ This work is based on a previous commit of Francesco Montefoschi : https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 Only tested on the UDOO Neo Full board. Signed-off-by: Breno Lima Reviewed-by: Fabio Estevam --- diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 8b2217edbd..a81d944028 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -200,6 +200,10 @@ config TARGET_UDOO bool "udoo" select SUPPORT_SPL +config TARGET_UDOO_NEO + bool "UDOO Neo" + select SUPPORT_SPL + config TARGET_WANDBOARD bool "wandboard" select SUPPORT_SPL @@ -261,6 +265,7 @@ source "board/technexion/pico-imx6ul/Kconfig" source "board/tbs/tbs2910/Kconfig" source "board/tqc/tqma6/Kconfig" source "board/udoo/Kconfig" +source "board/udoo/neo/Kconfig" source "board/wandboard/Kconfig" source "board/warp/Kconfig" diff --git a/board/udoo/neo/Kconfig b/board/udoo/neo/Kconfig new file mode 100644 index 0000000000..8f474df248 --- /dev/null +++ b/board/udoo/neo/Kconfig @@ -0,0 +1,12 @@ +if TARGET_UDOO_NEO + +config SYS_VENDOR + default "udoo" + +config SYS_BOARD + default "neo" + +config SYS_CONFIG_NAME + default "udoo_neo" + +endif diff --git a/board/udoo/neo/MAINTAINERS b/board/udoo/neo/MAINTAINERS new file mode 100644 index 0000000000..743fe33d05 --- /dev/null +++ b/board/udoo/neo/MAINTAINERS @@ -0,0 +1,7 @@ +UDOO NEO BOARD +M: Breno Lima +M: Francesco Montefoschi +S: Maintained +F: board/udoo/neo/ +F: include/configs/udoo_neo.h +F: configs/udoo_neo_defconfig diff --git a/board/udoo/neo/Makefile b/board/udoo/neo/Makefile new file mode 100644 index 0000000000..150cbc1a97 --- /dev/null +++ b/board/udoo/neo/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2015 UDOO Team +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := neo.o diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c new file mode 100644 index 0000000000..7f17469d9a --- /dev/null +++ b/board/udoo/neo/neo.c @@ -0,0 +1,441 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * Copyright (C) Jasbir Matharu + * Copyright (C) UDOO Team + * + * Author: Breno Lima + * Author: Francesco Montefoschi + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +enum { + UDOO_NEO_TYPE_BASIC, + UDOO_NEO_TYPE_BASIC_KS, + UDOO_NEO_TYPE_FULL, + UDOO_NEO_TYPE_EXTENDED, +}; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm) + +#define BOARD_DETECT_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST) +#define BOARD_DETECT_PAD_CFG (MUX_PAD_CTRL(BOARD_DETECT_PAD_CTRL) | \ + MUX_MODE_SION) + +int dram_init(void) +{ + gd->ram_size = imx_ddr_size(); + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + /* CD pin */ + MX6_PAD_SD1_DATA0__GPIO6_IO_2 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* Power */ + MX6_PAD_SD1_CMD__GPIO6_IO_1 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const board_recognition_pads[] = { + /*Connected to R184*/ + MX6_PAD_NAND_READY_B__GPIO4_IO_13 | BOARD_DETECT_PAD_CFG, + /*Connected to R185*/ + MX6_PAD_NAND_ALE__GPIO4_IO_0 | BOARD_DETECT_PAD_CFG, +}; + +static iomux_v3_cfg_t const usdhc3_pads[] = { + /* Configured for WLAN */ + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const wdog_b_pad = { + MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +static iomux_v3_cfg_t const peri_3v3_pads[] = { + MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +int board_init(void) +{ + /* Address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + /* + * Because kernel set WDOG_B mux before pad with the commone pinctrl + * framwork now and wdog reset will be triggered once set WDOG_B mux + * with default pad setting, we set pad setting here to workaround this. + * Since imx_iomux_v3_setup_pad also set mux before pad setting, we set + * as GPIO mux firstly here to workaround it. + */ + imx_iomux_v3_setup_pad(wdog_b_pad); + + /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */ + imx_iomux_v3_setup_multiple_pads(peri_3v3_pads, + ARRAY_SIZE(peri_3v3_pads)); + + /* Active high for ncp692 */ + gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); + + return 0; +} + +static int get_board_value(void) +{ + int r184, r185; + + imx_iomux_v3_setup_multiple_pads(board_recognition_pads, + ARRAY_SIZE(board_recognition_pads)); + + gpio_direction_input(IMX_GPIO_NR(4, 13)); + gpio_direction_input(IMX_GPIO_NR(4, 0)); + + r184 = gpio_get_value(IMX_GPIO_NR(4, 13)); + r185 = gpio_get_value(IMX_GPIO_NR(4, 0)); + + /* + * Machine selection - + * Machine r184, r185 + * --------------------------------- + * Basic 0 0 + * Basic Ks 0 1 + * Full 1 0 + * Extended 1 1 + */ + + return (r184 << 1) + r185; +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC2_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR, 0, 4}, +}; + +#define USDHC2_PWR_GPIO IMX_GPIO_NR(6, 1) +#define USDHC2_CD_GPIO IMX_GPIO_NR(6, 2) + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + break; + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ +#ifndef CONFIG_SPL_BUILD + int i, ret; + + /* + * According to the board_mmc_init() the following map is done: + * (U-boot device node) (Physical Port) + * mmc0 USDHC2 + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + gpio_direction_input(USDHC2_CD_GPIO); + gpio_direction_output(USDHC2_PWR_GPIO, 1); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + default: + printf("Warning: you configured more USDHC controllers\ + (%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) { + printf("Warning:\ + failed to initialize mmc dev %d\n", i); + return ret; + } + } + + return 0; +#else + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + u32 val; + u32 port; + + val = readl(&src_regs->sbmr1); + + if ((val & 0xc0) != 0x40) { + printf("Not boot from USDHC!\n"); + return -EINVAL; + } + + port = (val >> 11) & 0x3; + printf("port %d\n", port); + switch (port) { + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; + gpio_direction_input(USDHC2_CD_GPIO); + gpio_direction_output(USDHC2_PWR_GPIO, 1); + break; + case 2: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR; + break; + } + + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +#endif +} + +char *board_string(void) +{ + switch (get_board_value()) { + case UDOO_NEO_TYPE_BASIC: + return "BASIC"; + case UDOO_NEO_TYPE_BASIC_KS: + return "BASICKS"; + case UDOO_NEO_TYPE_FULL: + return "FULL"; + case UDOO_NEO_TYPE_EXTENDED: + return "EXTENDED"; + } + return "UNDEFINED"; +} + +int checkboard(void) +{ + printf("Board: UDOO Neo %s\n", board_string()); + return 0; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + setenv("board_name", board_string()); +#endif + + return 0; +} + +#ifdef CONFIG_SPL_BUILD + +#include +#include + +static const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = { + .dram_dqm0 = 0x00000028, + .dram_dqm1 = 0x00000028, + .dram_dqm2 = 0x00000028, + .dram_dqm3 = 0x00000028, + .dram_ras = 0x00000020, + .dram_cas = 0x00000020, + .dram_odt0 = 0x00000020, + .dram_odt1 = 0x00000020, + .dram_sdba2 = 0x00000000, + .dram_sdcke0 = 0x00003000, + .dram_sdcke1 = 0x00003000, + .dram_sdclk_0 = 0x00000030, + .dram_sdqs0 = 0x00000028, + .dram_sdqs1 = 0x00000028, + .dram_sdqs2 = 0x00000028, + .dram_sdqs3 = 0x00000028, + .dram_reset = 0x00000020, +}; + +static const struct mx6sx_iomux_grp_regs mx6_grp_ioregs = { + .grp_addds = 0x00000020, + .grp_ddrmode_ctl = 0x00020000, + .grp_ddrpke = 0x00000000, + .grp_ddrmode = 0x00020000, + .grp_b0ds = 0x00000028, + .grp_b1ds = 0x00000028, + .grp_ctlds = 0x00000020, + .grp_ddr_type = 0x000c0000, + .grp_b2ds = 0x00000028, + .grp_b3ds = 0x00000028, +}; + +static const struct mx6_mmdc_calibration neo_mmcd_calib = { + .p0_mpwldectrl0 = 0x000E000B, + .p0_mpwldectrl1 = 0x000E0010, + .p0_mpdgctrl0 = 0x41600158, + .p0_mpdgctrl1 = 0x01500140, + .p0_mprddlctl = 0x3A383E3E, + .p0_mpwrdlctl = 0x3A383C38, +}; + +static const struct mx6_mmdc_calibration neo_basic_mmcd_calib = { + .p0_mpwldectrl0 = 0x001E0022, + .p0_mpwldectrl1 = 0x001C0019, + .p0_mpdgctrl0 = 0x41540150, + .p0_mpdgctrl1 = 0x01440138, + .p0_mprddlctl = 0x403E4644, + .p0_mpwrdlctl = 0x3C3A4038, +}; + +/* MT41K256M16 */ +static struct mx6_ddr3_cfg neo_mem_ddr = { + .mem_speed = 1600, + .density = 4, + .width = 16, + .banks = 8, + .rowaddr = 15, + .coladdr = 10, + .pagesz = 2, + .trcd = 1375, + .trcmin = 4875, + .trasmin = 3500, +}; + +/* MT41K128M16 */ +static struct mx6_ddr3_cfg neo_basic_mem_ddr = { + .mem_speed = 1600, + .density = 2, + .width = 16, + .banks = 8, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1375, + .trcmin = 4875, + .trasmin = 3500, +}; + +static void ccgr_init(void) +{ + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + writel(0xFFFFFFFF, &ccm->CCGR0); + writel(0xFFFFFFFF, &ccm->CCGR1); + writel(0xFFFFFFFF, &ccm->CCGR2); + writel(0xFFFFFFFF, &ccm->CCGR3); + writel(0xFFFFFFFF, &ccm->CCGR4); + writel(0xFFFFFFFF, &ccm->CCGR5); + writel(0xFFFFFFFF, &ccm->CCGR6); + writel(0xFFFFFFFF, &ccm->CCGR7); +} + +static void spl_dram_init(void) +{ + int board = get_board_value(); + + struct mx6_ddr_sysinfo sysinfo = { + .dsize = 1, /* width of data bus: 1 = 32 bits */ + .cs_density = 24, + .ncs = 1, + .cs1_mirror = 0, + .rtt_wr = 2, + .rtt_nom = 2, /* RTT_Nom = RZQ/2 */ + .walat = 1, /* Write additional latency */ + .ralat = 5, /* Read additional latency */ + .mif3_mode = 3, /* Command prediction working mode */ + .bi_on = 1, /* Bank interleaving enabled */ + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ + }; + + mx6sx_dram_iocfg(32, &mx6_ddr_ioregs, &mx6_grp_ioregs); + if (board == UDOO_NEO_TYPE_BASIC || board == UDOO_NEO_TYPE_BASIC_KS) + mx6_dram_cfg(&sysinfo, &neo_basic_mmcd_calib, + &neo_basic_mem_ddr); + else + mx6_dram_cfg(&sysinfo, &neo_mmcd_calib, &neo_mem_ddr); +} + +void board_init_f(ulong dummy) +{ + ccgr_init(); + + /* setup AIPS and disable watchdog */ + arch_cpu_init(); + + board_early_init_f(); + + /* setup GP timer */ + timer_init(); + + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); + + /* DDR initialization */ + spl_dram_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + /* load/boot image from boot device */ + board_init_r(NULL, 0); +} + +#endif diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig new file mode 100644 index 0000000000..3304afb33c --- /dev/null +++ b/configs/udoo_neo_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_UDOO_NEO=y +CONFIG_SPL_EXT_SUPPORT=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_DHCP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_LIBFDT=y diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h new file mode 100644 index 0000000000..81e04810eb --- /dev/null +++ b/include/configs/udoo_neo.h @@ -0,0 +1,94 @@ +/* + * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright Jasbir Matharu + * Copyright 2015 UDOO Team + * + * Configuration settings for the UDOO NEO board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include +#include "mx6_common.h" + +#include "imx6_spl.h" + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_MXC_UART + +/* MMC Configuration */ +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +/* Command definition */ +#define CONFIG_MXC_UART_BASE UART1_BASE +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC2*/ + +/* Linux only */ +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttymxc0,115200\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=undefined\0" \ + "fdt_addr=0x83000000\0" \ + "ip_dyn=yes\0" \ + "mmcdev=0\0" \ + "mmcrootfstype=ext4\0" \ + "mmcautodetect=no\0" \ + "findfdt="\ + "if test $board_name = BASIC; then " \ + "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \ + "if test $board_name = BASICKS; then " \ + "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \ + "if test $board_name = FULL; then " \ + "setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \ + "if test $board_name = EXTENDED; then " \ + "setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \ + "if test $fdt_file = UNDEFINED; then " \ + "echo WARNING: Could not determine dtb to use; fi; \0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "ramdisk_addr_r=0x83000000\0" \ + "ramdiskaddr=0x83000000\0" \ + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) + +#define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ + "run distro_bootcmd" + +#include + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Environment organization */ +#define CONFIG_ENV_OFFSET (8 * SZ_64K) +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC + +#endif /* __CONFIG_H */