From: Patrick Delaunay Date: Fri, 11 Dec 2020 12:36:18 +0000 (+0100) Subject: arm: stm32mp: stm32prog: always flush DFU on start command for uart X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=751f918bdb5af2d376146eb4b4c8f7bde65c58c8;p=u-boot.git arm: stm32mp: stm32prog: always flush DFU on start command for uart Remove the test on data->dfu_seq, because dfu_seq=0 not only when the DFU is not started (mask with 0xffff). This flush is mandatory as the final treatment, common with USB, is done in DFU callback. This patch avoids issue if the received length is a multiple of the DFU packet. For example if size of bootfs partition is egual to 0x4000000, data->dfu_seq=0 at the end of the partition, the flush it not requested and the phase is not increased in the callback. U-Boot continue to request the bootfs in the next GetPhase command. Fixes: 468f0508b58b ("stm32mp: stm32prog: add serial link support") Signed-off-by: Patrick Delaunay Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c index e534b3fa82..68d841bd9d 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c @@ -397,14 +397,13 @@ static u8 stm32prog_start(struct stm32prog_data *data, u32 address) if (!dfu_entity) return -ENODEV; - if (data->dfu_seq) { - ret = dfu_flush(dfu_entity, NULL, 0, data->dfu_seq); - data->dfu_seq = 0; - if (ret) { - stm32prog_err("DFU flush failed [%d]", ret); - return ret; - } + ret = dfu_flush(dfu_entity, NULL, 0, data->dfu_seq); + if (ret) { + stm32prog_err("DFU flush failed [%d]", ret); + return ret; } + data->dfu_seq = 0; + printf("\n received length = 0x%x\n", data->cursor); if (data->header.present) { if (data->cursor !=