From: Svyatoslav Ryhel Date: Sun, 14 Jan 2024 19:39:33 +0000 (+0200) Subject: board: tegra30: switch to standard boot X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=745ca4900f0abb43414cb5359e3ee53542a92a26;p=u-boot.git board: tegra30: switch to standard boot Switch transformer, endeavoru, grouper and x3_t30 boards to bootflow scan. Signed-off-by: Svyatoslav Ryhel --- diff --git a/configs/endeavoru_defconfig b/configs/endeavoru_defconfig index 26622508f0..0bd04518b5 100644 --- a/configs/endeavoru_defconfig +++ b/configs/endeavoru_defconfig @@ -20,7 +20,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;" +CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 diff --git a/configs/grouper_common_defconfig b/configs/grouper_common_defconfig index 2346cd6b52..5f88b8c4a1 100644 --- a/configs/grouper_common_defconfig +++ b/configs/grouper_common_defconfig @@ -20,7 +20,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;" +CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig index 61fe3d34c9..66282998bb 100644 --- a/configs/transformer_t30_defconfig +++ b/configs/transformer_t30_defconfig @@ -20,7 +20,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff; fi" +CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff; fi" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 diff --git a/configs/x3_t30_defconfig b/configs/x3_t30_defconfig index 7af68bd9af..b9575780d2 100644 --- a/configs/x3_t30_defconfig +++ b/configs/x3_t30_defconfig @@ -21,7 +21,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;" +CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000