From: Gerlando Falauto <gerlando.falauto@keymile.com>
Date: Tue, 15 Jan 2013 22:34:28 +0000 (+0000)
Subject: kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=7070b550bee9341bcb53ceda15f9e0a58df88140;p=u-boot.git

kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH

If CONFIG_NAND_ECC_BCH is set use 4-bit error correction code instead of
the 1-bit error correction code on the NAND device.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Scott Wood <scottwood@freescale.com>
---

diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/kirkwood_nand.c
index bdab5aa795..0a99a10de1 100644
--- a/drivers/mtd/nand/kirkwood_nand.c
+++ b/drivers/mtd/nand/kirkwood_nand.c
@@ -74,7 +74,11 @@ void kw_nand_select_chip(struct mtd_info *mtd, int chip)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
+#if defined(CONFIG_NAND_ECC_BCH)
+	nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
 	nand->ecc.mode = NAND_ECC_SOFT;
+#endif
 	nand->cmd_ctrl = kw_nand_hwcontrol;
 	nand->chip_delay = 40;
 	nand->select_chip = kw_nand_select_chip;