From: Aaron Williams Date: Thu, 7 Apr 2022 07:11:25 +0000 (+0200) Subject: mips: octeon: Add cvmx-helper-xaui.c X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=6fd320cd5c4912b6685f0cb75e6d9ed815e5984b;p=u-boot.git mips: octeon: Add cvmx-helper-xaui.c Import cvmx-helper-xaui.c from 2013 U-Boot. It will be used by the later added drivers to support networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams Signed-off-by: Stefan Roese --- diff --git a/arch/mips/mach-octeon/cvmx-helper-xaui.c b/arch/mips/mach-octeon/cvmx-helper-xaui.c new file mode 100644 index 0000000000..2eb3b7d9c4 --- /dev/null +++ b/arch/mips/mach-octeon/cvmx-helper-xaui.c @@ -0,0 +1,518 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2022 Marvell International Ltd. + * + * Functions for XAUI initialization, configuration, + * and monitoring. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +int __cvmx_helper_xaui_enumerate(int xiface) +{ + struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); + int interface = xi.interface; + union cvmx_gmxx_hg2_control gmx_hg2_control; + + if (OCTEON_IS_MODEL(OCTEON_CN70XX)) { + enum cvmx_qlm_mode qlm_mode = + cvmx_qlm_get_dlm_mode(0, interface); + + if (qlm_mode == CVMX_QLM_MODE_RXAUI) + return 1; + return 0; + } + /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */ + gmx_hg2_control.u64 = csr_rd(CVMX_GMXX_HG2_CONTROL(interface)); + if (gmx_hg2_control.s.hg2tx_en) + return 16; + else + return 1; +} + +/** + * @INTERNAL + * Probe a XAUI interface and determine the number of ports + * connected to it. The XAUI interface should still be down + * after this call. + * + * @param xiface Interface to probe + * + * @return Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_xaui_probe(int xiface) +{ + int i, ports; + struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); + int interface = xi.interface; + union cvmx_gmxx_inf_mode mode; + + /* + * CN63XX Pass 1.0 errata G-14395 requires the QLM De-emphasis + * be programmed. + */ + if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_0)) { + union cvmx_ciu_qlm2 ciu_qlm; + + ciu_qlm.u64 = csr_rd(CVMX_CIU_QLM2); + ciu_qlm.s.txbypass = 1; + ciu_qlm.s.txdeemph = 0x5; + ciu_qlm.s.txmargin = 0x1a; + csr_wr(CVMX_CIU_QLM2, ciu_qlm.u64); + } + + /* + * CN63XX Pass 2.x errata G-15273 requires the QLM De-emphasis + * be programmed when using a 156.25Mhz ref clock. + */ + if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_X)) { + /* Read the QLM speed pins */ + union cvmx_mio_rst_boot mio_rst_boot; + + mio_rst_boot.u64 = csr_rd(CVMX_MIO_RST_BOOT); + + if (mio_rst_boot.cn63xx.qlm2_spd == 0xb) { + union cvmx_ciu_qlm2 ciu_qlm; + + ciu_qlm.u64 = csr_rd(CVMX_CIU_QLM2); + ciu_qlm.s.txbypass = 1; + ciu_qlm.s.txdeemph = 0xa; + ciu_qlm.s.txmargin = 0x1f; + csr_wr(CVMX_CIU_QLM2, ciu_qlm.u64); + } + } + + /* + * Check if QLM is configured correct for XAUI/RXAUI, verify + * the speed as well as mode. + */ + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + int qlm = cvmx_qlm_interface(xiface); + enum cvmx_qlm_mode mode = cvmx_qlm_get_mode(qlm); + + if (mode != CVMX_QLM_MODE_XAUI && mode != CVMX_QLM_MODE_RXAUI) + return 0; + } + + ports = __cvmx_helper_xaui_enumerate(xiface); + + if (ports <= 0) + return 0; + + /* + * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the + * interface needs to be enabled before IPD otherwise per port + * backpressure may not work properly. + */ + mode.u64 = csr_rd(CVMX_GMXX_INF_MODE(interface)); + mode.s.en = 1; + csr_wr(CVMX_GMXX_INF_MODE(interface), mode.u64); + + if (!OCTEON_IS_MODEL(OCTEON_CN68XX) && + !OCTEON_IS_MODEL(OCTEON_CN70XX)) { + /* + * Setup PKO to support 16 ports for HiGig2 virtual + * ports. We're pointing all of the PKO packet ports + * for this interface to the XAUI. This allows us to + * use HiGig2 backpressure per port. + */ + for (i = 0; i < 16; i++) { + union cvmx_pko_mem_port_ptrs pko_mem_port_ptrs; + + pko_mem_port_ptrs.u64 = 0; + /* + * We set each PKO port to have equal priority + * in a round robin fashion. + */ + pko_mem_port_ptrs.s.static_p = 0; + pko_mem_port_ptrs.s.qos_mask = 0xff; + /* All PKO ports map to the same XAUI hardware port */ + pko_mem_port_ptrs.s.eid = interface * 4; + pko_mem_port_ptrs.s.pid = interface * 16 + i; + pko_mem_port_ptrs.s.bp_port = interface * 16 + i; + csr_wr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64); + } + } + + return ports; +} + +/** + * @INTERNAL + * Bringup XAUI interface. After this call packet I/O should be + * fully functional. + * + * @param interface to bring up + * + * @return Zero on success, negative on failure + */ +int __cvmx_helper_xaui_link_init(int interface) +{ + union cvmx_gmxx_prtx_cfg gmx_cfg; + union cvmx_pcsxx_control1_reg xaui_ctl; + union cvmx_pcsxx_misc_ctl_reg misc_ctl; + union cvmx_gmxx_tx_xaui_ctl tx_ctl; + + /* (1) Interface has already been enabled. */ + + /* (2) Disable GMX. */ + misc_ctl.u64 = csr_rd(CVMX_PCSXX_MISC_CTL_REG(interface)); + misc_ctl.s.gmxeno = 1; + csr_wr(CVMX_PCSXX_MISC_CTL_REG(interface), misc_ctl.u64); + + /* (3) Disable GMX and PCSX interrupts. */ + csr_wr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); + csr_wr(CVMX_GMXX_TX_INT_EN(interface), 0x0); + csr_wr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); + + /* (4) Bring up the PCSX and GMX reconciliation layer. */ + /* (4)a Set polarity and lane swapping. */ + /* (4)b */ + tx_ctl.u64 = csr_rd(CVMX_GMXX_TX_XAUI_CTL(interface)); + /* Enable better IFG packing and improves performance */ + tx_ctl.s.dic_en = 1; + tx_ctl.s.uni_en = 0; + csr_wr(CVMX_GMXX_TX_XAUI_CTL(interface), tx_ctl.u64); + + /* (4)c Aply reset sequence */ + xaui_ctl.u64 = csr_rd(CVMX_PCSXX_CONTROL1_REG(interface)); + xaui_ctl.s.lo_pwr = 0; + + /* + * Errata G-15618 requires disabling PCS soft reset in some + * OCTEON II models. + */ + if (!OCTEON_IS_MODEL(OCTEON_CN63XX) && + !OCTEON_IS_MODEL(OCTEON_CN66XX_PASS1_X) && + !OCTEON_IS_MODEL(OCTEON_CN68XX)) + xaui_ctl.s.reset = 1; + csr_wr(CVMX_PCSXX_CONTROL1_REG(interface), xaui_ctl.u64); + + if (OCTEON_IS_MODEL(OCTEON_CN68XX_PASS2_X) && interface != 1) { + /* + * Note that GMX 1 was skipped as GMX0 is on the same + * QLM and will always be done first + * + * Workaround for Errata (G-16467). + */ + int qlm = interface; +#ifdef CVMX_QLM_DUMP_STATE + debug("%s:%d: XAUI%d: Applying workaround for Errata G-16467\n", + __func__, __LINE__, qlm); + cvmx_qlm_display_registers(qlm); + debug("\n"); +#endif + /* + * This workaround only applies to QLMs running XAUI + * at 6.25Ghz + */ + if ((cvmx_qlm_get_gbaud_mhz(qlm) == 6250) && + (cvmx_qlm_jtag_get(qlm, 0, "clkf_byp") != 20)) { + /* Wait 100us for links to stabalize */ + udelay(100); + cvmx_qlm_jtag_set(qlm, -1, "clkf_byp", 20); + /* Allow the QLM to exit reset */ + cvmx_qlm_jtag_set(qlm, -1, "cfg_rst_n_clr", 0); + /* Wait 100us for links to stabalize */ + udelay(100); + /* Allow TX on QLM */ + cvmx_qlm_jtag_set(qlm, -1, "cfg_tx_idle_set", 0); + } +#ifdef CVMX_QLM_DUMP_STATE + debug("%s:%d: XAUI%d: Done applying workaround for Errata G-16467\n", + __func__, __LINE__, qlm); + cvmx_qlm_display_registers(qlm); + debug("\n\n"); +#endif + } + + /* Wait for PCS to come out of reset */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_PCSXX_CONTROL1_REG(interface), + cvmx_pcsxx_control1_reg_t, reset, ==, 0, + 10000)) + return -1; + /* Wait for PCS to be aligned */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_PCSXX_10GBX_STATUS_REG(interface), + cvmx_pcsxx_10gbx_status_reg_t, alignd, ==, 1, + 10000)) + return -1; + /* Wait for RX to be ready */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_RX_XAUI_CTL(interface), + cvmx_gmxx_rx_xaui_ctl_t, status, ==, 0, + 10000)) + return -1; + + /* (6) Configure GMX */ + + /* Wait for GMX RX to be idle */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_PRTX_CFG(0, interface), + cvmx_gmxx_prtx_cfg_t, rx_idle, ==, 1, 10000)) + return -1; + /* Wait for GMX TX to be idle */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_PRTX_CFG(0, interface), + cvmx_gmxx_prtx_cfg_t, tx_idle, ==, 1, 10000)) + return -1; + + /* GMX configure */ + gmx_cfg.u64 = csr_rd(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.speed = 1; + gmx_cfg.s.speed_msb = 0; + gmx_cfg.s.slottime = 1; + csr_wr(CVMX_GMXX_TX_PRTS(interface), 1); + csr_wr(CVMX_GMXX_TXX_SLOT(0, interface), 512); + csr_wr(CVMX_GMXX_TXX_BURST(0, interface), 8192); + csr_wr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + /* Wait for receive link */ + if (CVMX_WAIT_FOR_FIELD64(CVMX_PCSXX_STATUS1_REG(interface), + cvmx_pcsxx_status1_reg_t, rcv_lnk, ==, 1, + 10000)) + return -1; + if (CVMX_WAIT_FOR_FIELD64(CVMX_PCSXX_STATUS2_REG(interface), + cvmx_pcsxx_status2_reg_t, xmtflt, ==, 0, + 10000)) + return -1; + if (CVMX_WAIT_FOR_FIELD64(CVMX_PCSXX_STATUS2_REG(interface), + cvmx_pcsxx_status2_reg_t, rcvflt, ==, 0, + 10000)) + return -1; + + /* (8) Enable packet reception */ + misc_ctl.s.gmxeno = 0; + csr_wr(CVMX_PCSXX_MISC_CTL_REG(interface), misc_ctl.u64); + + /* Clear all error interrupts before enabling the interface. */ + csr_wr(CVMX_GMXX_RXX_INT_REG(0, interface), ~0x0ull); + csr_wr(CVMX_GMXX_TX_INT_REG(interface), ~0x0ull); + csr_wr(CVMX_PCSXX_INT_REG(interface), ~0x0ull); + + /* Enable GMX */ + gmx_cfg.u64 = csr_rd(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.en = 1; + csr_wr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + return 0; +} + +/** + * @INTERNAL + * Bringup and enable a XAUI interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @param xiface Interface to bring up + * + * @return Zero on success, negative on failure + */ +int __cvmx_helper_xaui_enable(int xiface) +{ + struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); + int interface = xi.interface; + + __cvmx_helper_setup_gmx(interface, 1); + + /* Setup PKND and BPID */ + if (octeon_has_feature(OCTEON_FEATURE_PKND)) { + union cvmx_gmxx_bpid_msk bpid_msk; + union cvmx_gmxx_bpid_mapx bpid_map; + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + union cvmx_gmxx_txx_append gmxx_txx_append_cfg; + + /* Setup PKIND */ + gmxx_prtx_cfg.u64 = csr_rd(CVMX_GMXX_PRTX_CFG(0, interface)); + gmxx_prtx_cfg.s.pknd = cvmx_helper_get_pknd(interface, 0); + csr_wr(CVMX_GMXX_PRTX_CFG(0, interface), gmxx_prtx_cfg.u64); + + /* Setup BPID */ + bpid_map.u64 = csr_rd(CVMX_GMXX_BPID_MAPX(0, interface)); + bpid_map.s.val = 1; + bpid_map.s.bpid = cvmx_helper_get_bpid(interface, 0); + csr_wr(CVMX_GMXX_BPID_MAPX(0, interface), bpid_map.u64); + + bpid_msk.u64 = csr_rd(CVMX_GMXX_BPID_MSK(interface)); + bpid_msk.s.msk_or |= 1; + bpid_msk.s.msk_and &= ~1; + csr_wr(CVMX_GMXX_BPID_MSK(interface), bpid_msk.u64); + + /* CN68XX adds the padding and FCS in PKO, not GMX */ + gmxx_txx_append_cfg.u64 = + csr_rd(CVMX_GMXX_TXX_APPEND(0, interface)); + gmxx_txx_append_cfg.s.fcs = 0; + gmxx_txx_append_cfg.s.pad = 0; + csr_wr(CVMX_GMXX_TXX_APPEND(0, interface), + gmxx_txx_append_cfg.u64); + } + + /* 70XX eval boards use Marvel phy, set disparity accordingly. */ + if (OCTEON_IS_MODEL(OCTEON_CN70XX)) { + union cvmx_gmxx_rxaui_ctl rxaui_ctl; + + rxaui_ctl.u64 = csr_rd(CVMX_GMXX_RXAUI_CTL(interface)); + rxaui_ctl.s.disparity = 1; + csr_wr(CVMX_GMXX_RXAUI_CTL(interface), rxaui_ctl.u64); + } + + __cvmx_helper_xaui_link_init(interface); + + return 0; +} + +/** + * @INTERNAL + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @param ipd_port IPD/PKO port to query + * + * @return Link state + */ +cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; + union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; + union cvmx_pcsxx_status1_reg pcsxx_status1_reg; + cvmx_helper_link_info_t result; + + gmxx_tx_xaui_ctl.u64 = csr_rd(CVMX_GMXX_TX_XAUI_CTL(interface)); + gmxx_rx_xaui_ctl.u64 = csr_rd(CVMX_GMXX_RX_XAUI_CTL(interface)); + pcsxx_status1_reg.u64 = csr_rd(CVMX_PCSXX_STATUS1_REG(interface)); + result.u64 = 0; + + /* Only return a link if both RX and TX are happy */ + if (gmxx_tx_xaui_ctl.s.ls == 0 && gmxx_rx_xaui_ctl.s.status == 0 && + pcsxx_status1_reg.s.rcv_lnk == 1) { + union cvmx_pcsxx_misc_ctl_reg misc_ctl; + + result.s.link_up = 1; + result.s.full_duplex = 1; + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { + union cvmx_mio_qlmx_cfg qlm_cfg; + int lanes; + int qlm = (interface == 1) ? 0 : interface; + + qlm_cfg.u64 = csr_rd(CVMX_MIO_QLMX_CFG(qlm)); + result.s.speed = cvmx_qlm_get_gbaud_mhz(qlm) * 8 / 10; + lanes = (qlm_cfg.s.qlm_cfg == 7) ? 2 : 4; + result.s.speed *= lanes; + } else if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + int qlm = cvmx_qlm_interface(interface); + + result.s.speed = cvmx_qlm_get_gbaud_mhz(qlm) * 8 / 10; + result.s.speed *= 4; + } else { + result.s.speed = 10000; + } + misc_ctl.u64 = csr_rd(CVMX_PCSXX_MISC_CTL_REG(interface)); + if (misc_ctl.s.gmxeno) + __cvmx_helper_xaui_link_init(interface); + } else { + /* Disable GMX and PCSX interrupts. */ + csr_wr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); + csr_wr(CVMX_GMXX_TX_INT_EN(interface), 0x0); + csr_wr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); + } + return result; +} + +/** + * @INTERNAL + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). It is normally best to use + * cvmx_helper_link_autoconf() instead. + * + * @param ipd_port IPD/PKO port to configure + * @param link_info The new link state + * + * @return Zero on success, negative on failure + */ +int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; + union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; + + gmxx_tx_xaui_ctl.u64 = csr_rd(CVMX_GMXX_TX_XAUI_CTL(interface)); + gmxx_rx_xaui_ctl.u64 = csr_rd(CVMX_GMXX_RX_XAUI_CTL(interface)); + + /* If the link shouldn't be up, then just return */ + if (!link_info.s.link_up) + return 0; + + /* Do nothing if both RX and TX are happy */ + if (gmxx_tx_xaui_ctl.s.ls == 0 && gmxx_rx_xaui_ctl.s.status == 0) + return 0; + + /* Bring the link up */ + return __cvmx_helper_xaui_link_init(interface); +} + +/** + * @INTERNAL + * Configure a port for internal and/or external loopback. Internal loopback + * causes packets sent by the port to be received by Octeon. External loopback + * causes packets received from the wire to sent out again. + * + * @param ipd_port IPD/PKO port to loopback. + * @param enable_internal + * Non zero if you want internal loopback + * @param enable_external + * Non zero if you want external loopback + * + * @return Zero on success, negative on failure. + */ +extern int __cvmx_helper_xaui_configure_loopback(int ipd_port, + int enable_internal, + int enable_external) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_pcsxx_control1_reg pcsxx_control1_reg; + union cvmx_gmxx_xaui_ext_loopback gmxx_xaui_ext_loopback; + + /* Set the internal loop */ + pcsxx_control1_reg.u64 = csr_rd(CVMX_PCSXX_CONTROL1_REG(interface)); + pcsxx_control1_reg.s.loopbck1 = enable_internal; + csr_wr(CVMX_PCSXX_CONTROL1_REG(interface), pcsxx_control1_reg.u64); + + /* Set the external loop */ + gmxx_xaui_ext_loopback.u64 = + csr_rd(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface)); + gmxx_xaui_ext_loopback.s.en = enable_external; + csr_wr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface), + gmxx_xaui_ext_loopback.u64); + + /* Take the link through a reset */ + return __cvmx_helper_xaui_link_init(interface); +}