From: Stephen Warren Date: Thu, 15 Sep 2016 18:19:39 +0000 (-0600) Subject: ARM: tegra: fix ULPI PHY on Ventana and Seaboard X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=6dca554f238d23d2c67873d850b7576e5971c5fd;p=u-boot.git ARM: tegra: fix ULPI PHY on Ventana and Seaboard Commit ce02a71c2374 "tegra: dts: Sync tegra20 device tree files with Linux" enabled the ULPI USB port on Ventana, but made no attempt to ensure that U-Boot code could handle this. In practice, various code is missing, and various configuration options are not enabled, which causes U-Boot to hang when attempting to initialize this USB port. This patch enables ULPI PHY support on Ventana, and adds the required pinmux setup for the port to operate. Note that Ventana is so similar to Seaboard that this change is made in the Seaboard board file, which is shared with Ventana. Seaboard also has the ULPI USB port wired up in hardware, although to an internal port that often doesn't have anything attached to it. However, the DT nodes for the USB controller and PHY had different status property values, so the port was not initialized by U-Boot. Fix this inconsistency, and enable the ULPI port, just like in the Linux kernel DT. This likewise requires enabling ULPI support in the Seaboard defconfig. Cc: Marcel Ziswiler Signed-off-by: Stephen Warren Reviewed-by: Simon Glass Signed-off-by: Tom Warren --- diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts index 77f5bb51b0..341c7f3583 100644 --- a/arch/arm/dts/tegra20-seaboard.dts +++ b/arch/arm/dts/tegra20-seaboard.dts @@ -784,7 +784,7 @@ }; usb@c5004000 { - status = "disabled"; + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index fc9c1c9b34..4e01deb02f 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -44,6 +44,12 @@ void pin_mux_mmc(void) void pin_mux_usb(void) { - /* For USB's GPIO PD0. For now, since we have no pinmux in fdt */ + /* For USB0's GPIO PD0. For now, since we have no pinmux in fdt */ pinmux_tristate_disable(PMUX_PINGRP_SLXK); + /* For USB1's ULPI signals */ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + pinmux_set_func(PMUX_PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PMUX_PINGRP_CDEV2); + /* USB1 PHY reset GPIO */ + pinmux_tristate_disable(PMUX_PINGRP_UAC); } diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 12cc9b62e7..806caca122 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -35,6 +35,8 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDEO_TEGRA20=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 8288c86006..56e7ba367d 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -34,6 +34,8 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDEO_TEGRA20=y