From: Roger Quadros <rogerq@kernel.org>
Date: Fri, 29 Sep 2023 13:46:46 +0000 (+0300)
Subject: arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=6d35682fb61ef5933eb3ddcf57acf87eaa076634;p=u-boot.git

arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase

CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
main_conf is required for phy_gmii_sel.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.

Fixes the below dts warnings:

<stdout>: Warning (reg_format): /bus@f0000/syscon@100000/phy@4044:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (reg_format): /bus@f0000/ethernet@8000000/ethernet-ports/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): /bus@f0000/syscon@100000: node has a unit name, but no reg or ranges property
<stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
<stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #size-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #size-cells value
<stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index c658506256..b78d34b459 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -21,6 +21,10 @@
 	};
 };
 
+&main_conf {
+	bootph-all;
+};
+
 &cbass_main {
 	bootph-all;
 };
@@ -118,8 +122,43 @@
 	};
 };
 
+&inta_main_dmss {
+	bootph-all;
+};
+
+&main_pktdma {
+	bootph-all;
+};
+
+&cpsw3g_mdio {
+	bootph-all;
+};
+
+&cpsw3g_phy0 {
+	bootph-all;
+};
+
+&cpsw3g_phy1 {
+	bootph-all;
+};
+
+&main_rgmii1_pins_default {
+	bootph-all;
+};
+
+&main_rgmii2_pins_default {
+	bootph-all;
+};
+
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &cpsw3g {
 	bootph-all;
+	ethernet-ports {
+		bootph-all;
+	};
 };
 
 &cpsw_port1 {