From: Simon Glass <sjg@chromium.org>
Date: Tue, 22 Aug 2023 03:17:00 +0000 (-0600)
Subject: freescale: Drop call to init_func_vid() in the init sequence
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=6a32bfae61652f9dae621410ca6e094f374a1f11;p=u-boot.git

freescale: Drop call to init_func_vid() in the init sequence

Use the misc_init_f event instead, which is designed for this purpose.

All boards with CONFIG_VID already enable CONFIG_EVENT.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 61fced451e..033f48d04b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -78,6 +78,11 @@ void tzpc_init(void)
 #endif
 }
 
+__weak int init_func_vid(void)
+{
+	return 0;
+}
+
 void board_init_f(ulong dummy)
 {
 	int ret;
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 7a1047a77f..f2b8bec037 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -181,13 +181,14 @@ unsigned long long get_qixis_addr(void)
 #endif
 
 #if defined(CONFIG_VID)
-int init_func_vid(void)
+static int setup_core_voltage(void)
 {
 	if (adjust_vdd(0) < 0)
 		printf("core voltage not adjusted\n");
 
 	return 0;
 }
+EVENT_SPY_SIMPLE(EVT_MISC_INIT_F, setup_core_voltage);
 
 u16 soc_get_fuse_vid(int vid_index)
 {
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index d631a11ff6..2883848550 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -13,6 +13,7 @@
 #include <i2c.h>
 #include <malloc.h>
 #include <errno.h>
+#include <event.h>
 #include <netdev.h>
 #include <fsl_ddr.h>
 #include <asm/io.h>
@@ -242,6 +243,7 @@ int init_func_vid(void)
 	return 0;
 }
 #endif
+EVENT_SPY_SIMPLE(EVT_MISC_INIT_F, init_func_vid);
 
 int checkboard(void)
 {
diff --git a/common/board_f.c b/common/board_f.c
index 46008bac65..aef395b135 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -280,13 +280,6 @@ static int init_func_i2c(void)
 }
 #endif
 
-#if defined(CONFIG_VID)
-__weak int init_func_vid(void)
-{
-	return 0;
-}
-#endif
-
 static int setup_mon_len(void)
 {
 #if defined(__ARM__) || defined(__MICROBLAZE__)
@@ -896,9 +889,6 @@ static const init_fnc_t init_sequence_f[] = {
 	INIT_FUNC_WATCHDOG_RESET
 #if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 	init_func_i2c,
-#endif
-#if defined(CONFIG_VID) && !defined(CONFIG_SPL)
-	init_func_vid,
 #endif
 	announce_dram_init,
 	dram_init,		/* configure available RAM banks */
diff --git a/include/init.h b/include/init.h
index 1bf76e4eff..13579db759 100644
--- a/include/init.h
+++ b/include/init.h
@@ -276,9 +276,6 @@ int set_cpu_clk_info(void);
 int update_flash_size(int flash_size);
 int arch_early_init_r(void);
 int misc_init_r(void);
-#if defined(CONFIG_VID)
-int init_func_vid(void);
-#endif
 
 /* common/board_info.c */
 int checkboard(void);