From: Hardik Patel <hardik.patel@volansystech.com>
Date: Wed, 27 Nov 2013 15:46:21 +0000 (+0530)
Subject: pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=675cc77a3ae45e8b0ec17128563264d4a509f628;p=u-boot.git

pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM

Signed-off-by: Hardik Patel <hardik.patel@volansystech.com>
---

diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index 811e7764c1..6903696e1b 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -32,7 +32,7 @@
 
 #ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 
-static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
+const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
 	.sdram_config_init		= 0x80000eb9,
 	.sdram_config			= 0x80001ab9,
 	.ref_ctrl			= 0x0000030c,
@@ -46,7 +46,7 @@ static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
 	.emif_ddr_phy_ctlr_1		= 0x049ff808
 };
 
-static const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
+const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
 	.sdram_config_init		= 0x80000eb1,
 	.sdram_config			= 0x80001ab1,
 	.ref_ctrl			= 0x000005cd,
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 39c531632e..ce8217f697 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -16,6 +16,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
+extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
 struct omap_sysinfo {
 	char *board_string;
 };
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index c104024b10..cda09a9125 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -122,6 +122,66 @@ int get_board_revision(void)
 	return board_id;
 }
 
+/**
+ * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
+ *
+ *
+ * Detect if we are running on B3 version of ES panda board,
+ * This can be done by reading the level of GPIO 171 and checking the
+ * processor revisions.
+ * GPIO171: 1 => Panda ES Rev B3
+ *
+ * Return : return 1 if Panda ES Rev B3 , else return 0
+ */
+u8 is_panda_es_rev_b3(void)
+{
+        int processor_rev = omap_revision();
+        int ret = 0;
+
+        if ((processor_rev >= OMAP4460_ES1_0 &&
+             processor_rev <= OMAP4460_ES1_1)) {
+
+                /* Setup the mux for the common board ID pins (gpio 171) */
+                writew((IEN | M3),
+			(*ctrl)->control_padconf_core_base + UNIPRO_TX0);
+
+                /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
+                ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
+        }
+        return ret;
+}
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+/*
+ * emif_get_reg_dump() - emif_get_reg_dump strong function
+ *
+ * @emif_nr - emif base
+ * @regs - reg dump of timing values
+ *
+ * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
+ */
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+	u32 omap4_rev = omap_revision();
+
+	/* Same devices and geometry on both EMIFs */
+	if (omap4_rev == OMAP4430_ES1_0)
+		*regs = &emif_regs_elpida_380_mhz_1cs;
+	else if (omap4_rev == OMAP4430_ES2_0)
+		*regs = &emif_regs_elpida_200_mhz_2cs;
+	else if (omap4_rev == OMAP4430_ES2_3)
+		*regs = &emif_regs_elpida_400_mhz_1cs;
+	else if (omap4_rev < OMAP4470_ES1_0) {
+		if(is_panda_es_rev_b3())
+			*regs = &emif_regs_elpida_400_mhz_1cs;
+		else
+			*regs = &emif_regs_elpida_400_mhz_2cs;
+	}
+	else
+		*regs = &emif_regs_elpida_400_mhz_1cs;
+}
+#endif
+
 /**
  * @brief misc_init_r - Configure Panda board specific configurations
  * such as power configurations, ethernet initialization as phase2 of