From: Tim Harvey <tharvey@gateworks.com>
Date: Mon, 13 Mar 2017 15:51:03 +0000 (-0700)
Subject: imx: ventana: move mmc_init to common
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=65da5c3b653c8ac63accc51194863bc8ff10b4e3;p=u-boot.git

imx: ventana: move mmc_init to common

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
---

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 4065c5655a..eb14cb7f07 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -6,10 +6,12 @@
  * SPDX-License-Identifier: GPL-2.0+
  */
 
+#include <asm/arch/clock.h>
 #include <asm/arch/mx6-pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/mxc_i2c.h>
+#include <fsl_esdhc.h>
 #include <hwconfig.h>
 #include <power/pmic.h>
 #include <power/ltc3676_pmic.h>
@@ -35,6 +37,17 @@ void setup_iomux_uart(void)
 	SETUP_IOMUX_PADS(uart2_pads);
 }
 
+/* MMC */
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00  | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
 /* I2C1: GSC */
 static struct i2c_pads_info mx6q_i2c_pad_info0 = {
 	.scl = {
@@ -964,3 +977,25 @@ void setup_pmic(void)
 		}
 	}
 }
+
+#ifdef CONFIG_FSL_ESDHC
+static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR };
+
+int board_mmc_init(bd_t *bis)
+{
+	/* Only one USDHC controller on Ventana */
+	SETUP_IOMUX_PADS(usdhc3_pads);
+	usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	usdhc_cfg.max_bus_width = 4;
+
+	return fsl_esdhc_initialize(bis, &usdhc_cfg);
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	/* Card Detect */
+	gpio_request(GP_SD3_CD, "sd_cd");
+	gpio_direction_input(GP_SD3_CD);
+	return !gpio_get_value(GP_SD3_CD);
+}
+#endif /* CONFIG_FSL_ESDHC */
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 5d871ceed9..ba648f5e25 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -52,17 +52,6 @@ struct ventana_board_info ventana_info;
 
 static int board_type;
 
-/* MMC */
-static iomux_v3_cfg_t const usdhc3_pads[] = {
-	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00  | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
 /* ENET */
 static iomux_v3_cfg_t const enet_pads[] = {
 	IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
@@ -193,28 +182,6 @@ int board_ehci_power(int port, int on)
 }
 #endif /* CONFIG_USB_EHCI_MX6 */
 
-#ifdef CONFIG_FSL_ESDHC
-static struct fsl_esdhc_cfg usdhc_cfg = { USDHC3_BASE_ADDR };
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	/* Card Detect */
-	gpio_request(GP_SD3_CD, "sd_cd");
-	gpio_direction_input(GP_SD3_CD);
-	return !gpio_get_value(GP_SD3_CD);
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	/* Only one USDHC controller on Ventana */
-	SETUP_IOMUX_PADS(usdhc3_pads);
-	usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-	usdhc_cfg.max_bus_width = 4;
-
-	return fsl_esdhc_initialize(bis, &usdhc_cfg);
-}
-#endif /* CONFIG_FSL_ESDHC */
-
 #ifdef CONFIG_MXC_SPI
 iomux_v3_cfg_t const ecspi1_pads[] = {
 	/* SS1 */