From: Tom Rini Date: Wed, 5 Feb 2014 15:24:23 +0000 (-0500) Subject: cmd_mmc.c: Drop open/close mmc sub-commands X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=614b2bf1c9bf80dbad24f5e5ce1d115bf24a831d;p=u-boot.git cmd_mmc.c: Drop open/close mmc sub-commands The open and close mmc sub-commands implement a hard-coded set of values specific to the SMDK5250 platform. Remove these commands as what they did can be done instead with a series of mmc dev / bootpart / bootbus commands instead now. Cc: Amar Cc: Minkyu Kang Acked-by: Jaehoon Chung Signed-off-by: Tom Rini Signed-off-by: Pantelis Antoniou --- diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index a028149d90..2d51927060 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -131,36 +131,6 @@ U_BOOT_CMD( "- display info of the current MMC device" ); -#ifdef CONFIG_SUPPORT_EMMC_BOOT -static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) -{ - int err; - err = mmc_boot_part_access(mmc, ack, part_num, access); - - if ((err == 0) && (access != 0)) { - printf("\t\t\t!!!Notice!!!\n"); - - printf("!You must close EMMC boot Partition"); - printf("after all images are written\n"); - - printf("!EMMC boot partition has continuity"); - printf("at image writing time.\n"); - - printf("!So, do not close the boot partition"); - printf("before all images are written.\n"); - return 0; - } else if ((err == 0) && (access == 0)) - return 0; - else if ((err != 0) && (access != 0)) { - printf("EMMC boot partition-%d OPEN Failed.\n", part_num); - return 1; - } else { - printf("EMMC boot partition-%d CLOSE Failed.\n", part_num); - return 1; - } -} -#endif - static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { enum mmc_state state; @@ -273,44 +243,6 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; #ifdef CONFIG_SUPPORT_EMMC_BOOT - } else if ((strcmp(argv[1], "open") == 0) || - (strcmp(argv[1], "close") == 0)) { - int dev; - struct mmc *mmc; - u8 part_num, access = 0; - - if (argc == 4) { - dev = simple_strtoul(argv[2], NULL, 10); - part_num = simple_strtoul(argv[3], NULL, 10); - } else { - return CMD_RET_USAGE; - } - - mmc = find_mmc_device(dev); - if (!mmc) { - printf("no mmc device at slot %x\n", dev); - return 1; - } - - if (IS_SD(mmc)) { - printf("SD device cannot be opened/closed\n"); - return 1; - } - - if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) { - printf("Invalid boot partition number:\n"); - printf("Boot partition number cannot be <= 0\n"); - printf("EMMC44 supports only 2 boot partitions\n"); - return 1; - } - - if (strcmp(argv[1], "open") == 0) - access = part_num; /* enable R/W access to boot part*/ - else - access = 0; /* No access to boot partition */ - - /* acknowledge to be sent during boot operation */ - return boot_part_access(mmc, 1, part_num, access); } else if (strcmp(argv[1], "partconf") == 0) { int dev; struct mmc *mmc; @@ -498,10 +430,6 @@ U_BOOT_CMD( "mmc dev [dev] [part] - show or set current mmc device [partition]\n" "mmc list - lists available devices\n" #ifdef CONFIG_SUPPORT_EMMC_BOOT - "mmc open \n" - " - Enable boot_part for booting and enable R/W access of boot_part\n" - "mmc close \n" - " - Enable boot_part for booting and disable access to boot_part\n" "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n" " - Set the BOOT_BUS_WIDTH field of the specified device\n" "mmc bootpart-resize \n" diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 37719d2655..8ab0bc948f 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1441,71 +1441,6 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, return 0; } -/* - * This function shall form and send the commands to open / close the - * boot partition specified by user. - * - * Input Parameters: - * ack: 0x0 - No boot acknowledge sent (default) - * 0x1 - Boot acknowledge sent during boot operation - * part_num: User selects boot data that will be sent to master - * 0x0 - Device not boot enabled (default) - * 0x1 - Boot partition 1 enabled for boot - * 0x2 - Boot partition 2 enabled for boot - * access: User selects partitions to access - * 0x0 : No access to boot partition (default) - * 0x1 : R/W boot partition 1 - * 0x2 : R/W boot partition 2 - * 0x3 : R/W Replay Protected Memory Block (RPMB) - * - * Returns 0 on success. - */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) -{ - int err; - struct mmc_cmd cmd; - - /* Boot ack enable, boot partition enable , boot partition access */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; - - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_PART_CONF << 16) | - ((EXT_CSD_BOOT_ACK(ack) | - EXT_CSD_BOOT_PART_NUM(part_num) | - EXT_CSD_PARTITION_ACCESS(access)) << 8); - - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - if (access) { - debug("mmc boot partition#%d open fail:Error1 = %d\n", - part_num, err); - } else { - debug("mmc boot partition#%d close fail:Error = %d\n", - part_num, err); - } - return err; - } - - if (access) { - /* 4bit transfer mode at booting time. */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; - - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_BOOT_BUS_WIDTH << 16) | - ((1 << 0) << 8); - - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - debug("mmc boot partition#%d open fail:Error2 = %d\n", - part_num, err); - return err; - } - } - return 0; -} - /* * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH diff --git a/include/mmc.h b/include/mmc.h index 3594286d42..e95a2376d2 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -313,8 +313,6 @@ int mmc_set_dsr(struct mmc *mmc, u16 val); /* Function to change the size of boot partition and rpmb partitions */ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, unsigned long rpmbsize); -/* Function to send commands to open/close the specified boot partition */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access); /* Function to modify the PARTITION_CONFIG field of EXT_CSD */ int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */