From: Tom Rini Date: Sat, 12 Nov 2022 22:36:44 +0000 (-0500) Subject: Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=60db32502c7f5d54c4cd4e485b95204166a83678;p=u-boot.git Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC_OOBFIRST Signed-off-by: Tom Rini Reviewed-by: Simon Glass --- diff --git a/README b/README index d75c3fbc85..4309d93386 100644 --- a/README +++ b/README @@ -1378,10 +1378,6 @@ The following options need to be configured: CONFIG_SYS_NAND_U_BOOT_START Entry point in loaded image to jump to - CONFIG_SYS_NAND_HW_ECC_OOBFIRST - Define this if you need to first read the OOB and then the - data. This is used, for example, on davinci platforms. - CONFIG_SPL_RAM_DEVICE Support for running image already present in ram, in SPL binary diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index 30454a3787..84563b2a3c 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -87,6 +87,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y CONFIG_NAND_DAVINCI=y CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST=y +CONFIG_SYS_NAND_HW_ECC_OOBFIRST=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 51c78dc51a..a067c01779 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -84,6 +84,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y CONFIG_NAND_DAVINCI=y CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST=y +CONFIG_SYS_NAND_HW_ECC_OOBFIRST=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 48a7507c64..49b7a4b04b 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -712,6 +712,11 @@ config SPL_NAND_SIMPLE help Support for NAND boot using simple NAND drivers that expose the cmd_ctrl() interface. + +config SYS_NAND_HW_ECC_OOBFIRST + bool "In SPL, read the OOB first and then the data from NAND" + depends on SPL_NAND_SIMPLE + endif endif # if NAND diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 262a79be01..abf5db934c 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -113,7 +113,6 @@ #define CONFIG_SYS_NAND_MASK_CLE 0x10 #define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 4b24d614e1..184360f7e9 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -111,7 +111,6 @@ #define CONFIG_SYS_NAND_MASK_CLE 0x10 #define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000