From: Tom Rini Date: Sat, 11 Dec 2021 19:55:47 +0000 (-0500) Subject: Clarify CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW in Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=5fd4a7ed0ce102c7f3720f67555878bc0b395eb6;p=u-boot.git Clarify CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW in Kconfig This is a "hex" prompt but the default value was given as an int. Switch the default to hex (0x0) and remove the defconfigs that were using the default, but as hex before. Signed-off-by: Tom Rini --- diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 54029adba4..3f59b99faf 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -77,7 +77,6 @@ CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 82a52e2835..ff28488ca2 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -76,7 +76,6 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 367f0d751c..ceb3c20bc5 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -77,7 +77,6 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR=0x51 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index f0ec2639a3..711439b241 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -63,7 +63,6 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index f343430f5d..64efb69cfb 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -84,7 +84,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_MTD=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 687b41bfb1..dc845899d1 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -124,7 +124,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3bae072005..33a8259254 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -416,7 +416,7 @@ if I2C_EEPROM config SYS_I2C_EEPROM_ADDR_OVERFLOW hex "EEPROM Address Overflow" - default 0 + default 0x0 help EEPROM chips that implement "address overflow" are ones like Catalyst 24WC04/08/16 which has 9/10/11 bits of