From: Anson Huang Date: Wed, 8 Aug 2018 01:17:50 +0000 (+0800) Subject: imx: mx7: add system suspend/resume support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=57b620255e726fae38e5e2ac5c7dec4b9011ffca;p=u-boot.git imx: mx7: add system suspend/resume support This patch adds system suspend/resume support, when linux kernel enters deep sleep mode, SoC will go into below mode: - CA7 platform goes into STOP mode; - SoC goes into DSM mode; - DDR goes into self-refresh mode; - CPU0/SCU will be powered down. When wake up event arrives: - SoC DSM mdoe exits; - CA7 platform exit STOP mode, SCU/CPU0 power up; - Invalidate L1 cache; - DDR exit self-refresh mode; - Do secure monitor mode related initialization; - Jump to linux kernel resume entry. Belwo is the log of 1 iteration of system suspend/resume: [ 338.824862] PM: suspend entry (deep) [ 338.828853] PM: Syncing filesystems ... done. [ 338.834433] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 338.842939] OOM killer disabled. [ 338.846182] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 338.869717] PM: suspend devices took 0.010 seconds [ 338.877846] Disabling non-boot CPUs ... [ 338.960301] Retrying again to check for CPU kill [ 338.964953] CPU1 killed. [ 338.968104] Enabling non-boot CPUs ... [ 338.973598] CPU1 is up [ 339.267155] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 339.275833] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 339.284158] mmc1: queuing unknown CIS tuple 0x80 (6 bytes) [ 339.385065] PM: resume devices took 0.400 seconds [ 339.389836] OOM killer enabled. [ 339.392986] Restarting tasks ... done. [ 339.398990] PM: suspend exit The resume entry function has to initialize stack pointer before calling C code, otherwise there will be an external abort occur, in additional, invalidate L1 cache must be done in secure section as well, so this patch also adds assembly code back and keep it as simple as possible. Signed-off-by: Anson Huang Acked-by: Stefan Agner Tested-by: Stefan Agner --- diff --git a/arch/arm/mach-imx/mx7/Makefile b/arch/arm/mach-imx/mx7/Makefile index 94a0e6464f..f1436e2d0d 100644 --- a/arch/arm/mach-imx/mx7/Makefile +++ b/arch/arm/mach-imx/mx7/Makefile @@ -4,4 +4,4 @@ # obj-y := soc.o clock.o clock_slice.o ddr.o snvs.o -obj-$(CONFIG_ARMV7_PSCI) += psci-mx7.o +obj-$(CONFIG_ARMV7_PSCI) += psci-mx7.o psci-suspend.o diff --git a/arch/arm/mach-imx/mx7/psci-mx7.c b/arch/arm/mach-imx/mx7/psci-mx7.c index d6c4263ce5..34ba0a9307 100644 --- a/arch/arm/mach-imx/mx7/psci-mx7.c +++ b/arch/arm/mach-imx/mx7/psci-mx7.c @@ -8,20 +8,77 @@ #include #include #include +#include +#include #include #include #include -#define GPC_CPU_PGC_SW_PDN_REQ 0xfc +#define GPC_LPCR_A7_BSC 0x0 +#define GPC_LPCR_A7_AD 0x4 +#define GPC_SLPCR 0x14 +#define GPC_PGC_ACK_SEL_A7 0x24 +#define GPC_IMR1_CORE0 0x30 +#define GPC_SLOT0_CFG 0xb0 #define GPC_CPU_PGC_SW_PUP_REQ 0xf0 +#define GPC_CPU_PGC_SW_PDN_REQ 0xfc +#define GPC_PGC_C0 0x800 #define GPC_PGC_C0 0x800 #define GPC_PGC_C1 0x840 +#define GPC_PGC_SCU 0x880 + +#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM 0x4000 +#define BM_LPCR_A7_BSC_LPM1 0xc +#define BM_LPCR_A7_BSC_LPM0 0x3 +#define BP_LPCR_A7_BSC_LPM0 0 +#define BM_SLPCR_EN_DSM 0x80000000 +#define BM_SLPCR_RBC_EN 0x40000000 +#define BM_SLPCR_REG_BYPASS_COUNT 0x3f000000 +#define BM_SLPCR_VSTBY 0x4 +#define BM_SLPCR_SBYOS 0x2 +#define BM_SLPCR_BYPASS_PMIC_READY 0x1 +#define BM_LPCR_A7_AD_L2PGE 0x10000 +#define BM_LPCR_A7_AD_EN_C1_PUP 0x800 +#define BM_LPCR_A7_AD_EN_C0_PUP 0x200 +#define BM_LPCR_A7_AD_EN_PLAT_PDN 0x10 +#define BM_LPCR_A7_AD_EN_C1_PDN 0x8 +#define BM_LPCR_A7_AD_EN_C0_PDN 0x2 #define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE0_A7 0x1 #define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 0x2 -/* below is for i.MX7D */ +#define BM_GPC_PGC_ACK_SEL_A7_PD_DUMMY_ACK 0x8000 +#define BM_GPC_PGC_ACK_SEL_A7_PU_DUMMY_ACK 0x80000000 + +#define MAX_SLOT_NUMBER 10 +#define A7_LPM_WAIT 0x5 +#define A7_LPM_STOP 0xa + +#define BM_SYS_COUNTER_CNTCR_FCR1 0x200 +#define BM_SYS_COUNTER_CNTCR_FCR0 0x100 + +#define REG_SET 0x4 +#define REG_CLR 0x8 + +#define ANADIG_ARM_PLL 0x60 +#define ANADIG_DDR_PLL 0x70 +#define ANADIG_SYS_PLL 0xb0 +#define ANADIG_ENET_PLL 0xe0 +#define ANADIG_AUDIO_PLL 0xf0 +#define ANADIG_VIDEO_PLL 0x130 +#define BM_ANATOP_ARM_PLL_OVERRIDE BIT(20) +#define BM_ANATOP_DDR_PLL_OVERRIDE BIT(19) +#define BM_ANATOP_SYS_PLL_OVERRIDE (0x1ff << 17) +#define BM_ANATOP_ENET_PLL_OVERRIDE BIT(13) +#define BM_ANATOP_AUDIO_PLL_OVERRIDE BIT(24) +#define BM_ANATOP_VIDEO_PLL_OVERRIDE BIT(24) + +#define DDRC_STAT 0x4 +#define DDRC_PWRCTL 0x30 +#define DDRC_PSTAT 0x3fc + #define SRC_GPR1_MX7D 0x074 +#define SRC_GPR2_MX7D 0x078 #define SRC_A7RCR0 0x004 #define SRC_A7RCR1 0x008 @@ -56,6 +113,27 @@ u8 psci_state[IMX7D_PSCI_NR_CPUS] __secure_data = { PSCI_AFFINITY_LEVEL_ON, PSCI_AFFINITY_LEVEL_OFF}; +enum imx_gpc_slot { + CORE0_A7, + CORE1_A7, + SCU_A7, + FAST_MEGA_MIX, + MIPI_PHY, + PCIE_PHY, + USB_OTG1_PHY, + USB_OTG2_PHY, + USB_HSIC_PHY, + CORE0_M4, +}; + +enum mxc_cpu_pwr_mode { + RUN, + WAIT, + STOP, +}; + +extern void psci_system_resume(void); + static inline void psci_set_state(int cpu, u8 state) { psci_state[cpu] = state; @@ -237,7 +315,374 @@ __secure s32 psci_features(u32 __always_unused function_id, u32 psci_fid) case ARM_PSCI_0_2_FN_SYSTEM_OFF: case ARM_PSCI_0_2_FN_SYSTEM_RESET: case ARM_PSCI_1_0_FN_PSCI_FEATURES: + case ARM_PSCI_1_0_FN_SYSTEM_SUSPEND: return 0x0; } return ARM_PSCI_RET_NI; } + +static __secure void imx_gpcv2_set_lpm_mode(enum mxc_cpu_pwr_mode mode) +{ + u32 val1, val2, val3; + + val1 = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC); + val2 = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR); + + /* all cores' LPM settings must be same */ + val1 &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1); + val1 |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM; + + val2 &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN | + BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY); + /* + * GPC: When improper low-power sequence is used, + * the SoC enters low power mode before the ARM core executes WFI. + * + * Software workaround: + * 1) Software should trigger IRQ #32 (IOMUX) to be always pending + * by setting IOMUX_GPR1_IRQ. + * 2) Software should then unmask IRQ #32 in GPC before setting GPC + * Low-Power mode. + * 3) Software should mask IRQ #32 right after GPC Low-Power mode + * is set. + */ + switch (mode) { + case RUN: + val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0); + val3 &= ~0x1; + writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0); + break; + case WAIT: + val1 |= A7_LPM_WAIT << BP_LPCR_A7_BSC_LPM0; + val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM; + val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0); + val3 &= ~0x1; + writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0); + break; + case STOP: + val1 |= A7_LPM_STOP << BP_LPCR_A7_BSC_LPM0; + val1 &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM; + val2 |= BM_SLPCR_EN_DSM; + val2 |= BM_SLPCR_SBYOS; + val2 |= BM_SLPCR_VSTBY; + val2 |= BM_SLPCR_BYPASS_PMIC_READY; + val3 = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0); + val3 |= 0x1; + writel(val3, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0); + break; + default: + return; + } + writel(val1, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_BSC); + writel(val2, GPC_IPS_BASE_ADDR + GPC_SLPCR); +} + +static __secure void imx_gpcv2_set_plat_power_gate_by_lpm(bool pdn) +{ + u32 val = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD); + + val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE); + if (pdn) + val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE; + + writel(val, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD); +} + +static __secure void imx_gpcv2_set_cpu_power_gate_by_lpm(u32 cpu, bool pdn) +{ + u32 val; + + val = readl(GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD); + if (cpu == 0) { + if (pdn) + val |= BM_LPCR_A7_AD_EN_C0_PDN | + BM_LPCR_A7_AD_EN_C0_PUP; + else + val &= ~(BM_LPCR_A7_AD_EN_C0_PDN | + BM_LPCR_A7_AD_EN_C0_PUP); + } + if (cpu == 1) { + if (pdn) + val |= BM_LPCR_A7_AD_EN_C1_PDN | + BM_LPCR_A7_AD_EN_C1_PUP; + else + val &= ~(BM_LPCR_A7_AD_EN_C1_PDN | + BM_LPCR_A7_AD_EN_C1_PUP); + } + writel(val, GPC_IPS_BASE_ADDR + GPC_LPCR_A7_AD); +} + +static __secure void imx_gpcv2_set_slot_ack(u32 index, enum imx_gpc_slot m_core, + bool mode, bool ack) +{ + u32 val; + + if (index >= MAX_SLOT_NUMBER) + return; + + /* set slot */ + writel(readl(GPC_IPS_BASE_ADDR + GPC_SLOT0_CFG + index * 4) | + ((mode + 1) << (m_core * 2)), + GPC_IPS_BASE_ADDR + GPC_SLOT0_CFG + index * 4); + + if (ack) { + /* set ack */ + val = readl(GPC_IPS_BASE_ADDR + GPC_PGC_ACK_SEL_A7); + /* clear dummy ack */ + val &= ~(mode ? BM_GPC_PGC_ACK_SEL_A7_PU_DUMMY_ACK : + BM_GPC_PGC_ACK_SEL_A7_PD_DUMMY_ACK); + val |= 1 << (m_core + (mode ? 16 : 0)); + writel(val, GPC_IPS_BASE_ADDR + GPC_PGC_ACK_SEL_A7); + } +} + +static __secure void imx_system_counter_resume(void) +{ + u32 val; + + val = readl(SYSCNT_CTRL_IPS_BASE_ADDR); + val &= ~BM_SYS_COUNTER_CNTCR_FCR1; + val |= BM_SYS_COUNTER_CNTCR_FCR0; + writel(val, SYSCNT_CTRL_IPS_BASE_ADDR); +} + +static __secure void imx_system_counter_suspend(void) +{ + u32 val; + + val = readl(SYSCNT_CTRL_IPS_BASE_ADDR); + val &= ~BM_SYS_COUNTER_CNTCR_FCR0; + val |= BM_SYS_COUNTER_CNTCR_FCR1; + writel(val, SYSCNT_CTRL_IPS_BASE_ADDR); +} + +static __secure void gic_resume(void) +{ + u32 itlinesnr, i; + u32 gic_dist_addr = GIC400_ARB_BASE_ADDR + GIC_DIST_OFFSET; + + /* enable the GIC distributor */ + writel(readl(gic_dist_addr + GICD_CTLR) | 0x03, + gic_dist_addr + GICD_CTLR); + + /* TYPER[4:0] contains an encoded number of available interrupts */ + itlinesnr = readl(gic_dist_addr + GICD_TYPER) & 0x1f; + + /* set all bits in the GIC group registers to one to allow access + * from non-secure state. The first 32 interrupts are private per + * CPU and will be set later when enabling the GIC for each core + */ + for (i = 1; i <= itlinesnr; i++) + writel((u32)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i); +} + +static inline void imx_pll_suspend(void) +{ + writel(BM_ANATOP_ARM_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_ARM_PLL + REG_SET); + writel(BM_ANATOP_DDR_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_DDR_PLL + REG_SET); + writel(BM_ANATOP_SYS_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_SYS_PLL + REG_SET); + writel(BM_ANATOP_ENET_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_ENET_PLL + REG_SET); + writel(BM_ANATOP_AUDIO_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_AUDIO_PLL + REG_SET); + writel(BM_ANATOP_VIDEO_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_VIDEO_PLL + REG_SET); +} + +static inline void imx_pll_resume(void) +{ + writel(BM_ANATOP_ARM_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_ARM_PLL + REG_CLR); + writel(BM_ANATOP_DDR_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_DDR_PLL + REG_CLR); + writel(BM_ANATOP_SYS_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_SYS_PLL + REG_CLR); + writel(BM_ANATOP_ENET_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_ENET_PLL + REG_CLR); + writel(BM_ANATOP_AUDIO_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_AUDIO_PLL + REG_CLR); + writel(BM_ANATOP_VIDEO_PLL_OVERRIDE, + ANATOP_BASE_ADDR + ANADIG_VIDEO_PLL + REG_CLR); +} + +static inline void imx_udelay(u32 usec) +{ + u32 freq; + u64 start, end; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); + asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start)); + do { + asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end)); + if ((end - start) > usec * (freq / 1000000)) + break; + } while (1); +} + +static inline void imx_ddrc_enter_self_refresh(void) +{ + writel(0, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL); + while (readl(DDRC_IPS_BASE_ADDR + DDRC_PSTAT) & 0x10001) + ; + + writel(0x20, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL); + while ((readl(DDRC_IPS_BASE_ADDR + DDRC_STAT) & 0x23) != 0x23) + ; + writel(readl(DDRC_IPS_BASE_ADDR + DDRC_PWRCTL) | 0x8, + DDRC_IPS_BASE_ADDR + DDRC_PWRCTL); +} + +static inline void imx_ddrc_exit_self_refresh(void) +{ + writel(0, DDRC_IPS_BASE_ADDR + DDRC_PWRCTL); + while ((readl(DDRC_IPS_BASE_ADDR + DDRC_STAT) & 0x3) == 0x3) + ; + writel(readl(DDRC_IPS_BASE_ADDR + DDRC_PWRCTL) | 0x1, + DDRC_IPS_BASE_ADDR + DDRC_PWRCTL); +} + +__secure void imx_system_resume(void) +{ + unsigned int i, val, imr[4], entry; + + entry = psci_get_target_pc(0); + imx_ddrc_exit_self_refresh(); + imx_system_counter_resume(); + imx_gpcv2_set_lpm_mode(RUN); + imx_gpcv2_set_cpu_power_gate_by_lpm(0, false); + imx_gpcv2_set_plat_power_gate_by_lpm(false); + imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C0); + imx_gpcv2_set_m_core_pgc(false, GPC_PGC_SCU); + + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + for (i = 0; i < 4; i++) { + imr[i] = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); + writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); + } + + /* configure RBC enable bit */ + val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR); + val &= ~BM_SLPCR_RBC_EN; + writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR); + + /* configure RBC count */ + val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR); + val &= ~BM_SLPCR_REG_BYPASS_COUNT; + writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + imx_udelay(65); + + /* restore GPC interrupt mask settings */ + for (i = 0; i < 4; i++) + writel(imr[i], GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); + + /* initialize gic distributor */ + gic_resume(); + _nonsec_init(); + + /* save cpu0 entry */ + psci_save(0, entry, 0); + psci_cpu_entry(); +} + +__secure void psci_system_suspend(u32 __always_unused function_id, + u32 ep, u32 context_id) +{ + u32 gpc_mask[4]; + u32 i, val; + + psci_save(0, ep, context_id); + /* overwrite PLL to be controlled by low power mode */ + imx_pll_suspend(); + imx_system_counter_suspend(); + /* set CA7 platform to enter STOP mode */ + imx_gpcv2_set_lpm_mode(STOP); + /* enable core0/scu power down/up with low power mode */ + imx_gpcv2_set_cpu_power_gate_by_lpm(0, true); + imx_gpcv2_set_plat_power_gate_by_lpm(true); + /* time slot settings for core0 and scu */ + imx_gpcv2_set_slot_ack(0, CORE0_A7, false, false); + imx_gpcv2_set_slot_ack(1, SCU_A7, false, true); + imx_gpcv2_set_slot_ack(5, SCU_A7, true, false); + imx_gpcv2_set_slot_ack(6, CORE0_A7, true, true); + imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C0); + imx_gpcv2_set_m_core_pgc(true, GPC_PGC_SCU); + psci_v7_flush_dcache_all(); + + imx_ddrc_enter_self_refresh(); + + /* + * e10133: ARM: Boot failure after A7 enters into + * low-power idle mode + * + * Workaround: + * If both CPU0/CPU1 are IDLE, the last IDLE CPU should + * disable GIC first, then REG_BYPASS_COUNTER is used + * to mask wakeup INT, and then execute “wfi” is used to + * bring the system into power down processing safely. + * The counter must be enabled as close to the “wfi” state + * as possible. The following equation can be used to + * determine the RBC counter value: + * RBC_COUNT * (1/32K RTC frequency) >= + * (46 + PDNSCR_SW + PDNSCR_SW2ISO ) ( 1/IPG_CLK frequency ). + */ + + /* disable GIC distributor */ + writel(0, GIC400_ARB_BASE_ADDR + GIC_DIST_OFFSET); + + for (i = 0; i < 4; i++) + gpc_mask[i] = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); + + /* + * enable the RBC bypass counter here + * to hold off the interrupts. RBC counter + * = 8 (240us). With this setting, the latency + * from wakeup interrupt to ARM power up + * is ~250uS. + */ + val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR); + val &= ~(0x3f << 24); + val |= (0x8 << 24); + writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR); + + /* enable the counter. */ + val = readl(GPC_IPS_BASE_ADDR + GPC_SLPCR); + val |= (1 << 30); + writel(val, GPC_IPS_BASE_ADDR + GPC_SLPCR); + + /* unmask all the GPC interrupts. */ + for (i = 0; i < 4; i++) + writel(gpc_mask[i], GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); + + /* + * now delay for a short while (3usec) + * ARM is at 1GHz at this point + * so a short loop should be enough. + * this delay is required to ensure that + * the RBC counter can start counting in + * case an interrupt is already pending + * or in case an interrupt arrives just + * as ARM is about to assert DSM_request. + */ + imx_udelay(3); + + /* save resume entry and sp in CPU0 GPR registers */ + asm volatile("mov %0, sp" : "=r" (val)); + writel((u32)psci_system_resume, SRC_BASE_ADDR + SRC_GPR1_MX7D); + writel(val, SRC_BASE_ADDR + SRC_GPR2_MX7D); + + /* sleep */ + while (1) + wfi(); +} diff --git a/arch/arm/mach-imx/mx7/psci-suspend.S b/arch/arm/mach-imx/mx7/psci-suspend.S new file mode 100644 index 0000000000..a21403f73f --- /dev/null +++ b/arch/arm/mach-imx/mx7/psci-suspend.S @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#include +#include + +#include +#include + + .pushsection ._secure.text, "ax" + + .arch_extension sec + +.globl v7_invalidate_l1 +v7_invalidate_l1: + mov r0, #0 + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + movw r1, #0x7fff + and r2, r1, r0, lsr #13 + + movw r1, #0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: + sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: + subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<