From: Quentin Schulz Date: Wed, 17 Jan 2024 17:59:10 +0000 (+0100) Subject: rockchip: ringneck-px30/puma-rk3399: factor out storage medium selection X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=56bb09f5022d46d1244ba02680b6a7f2a0317598;p=u-boot.git rockchip: ringneck-px30/puma-rk3399: factor out storage medium selection Ringneck PX30 and Puma RK3399 both have the same expectation with regard to bootstd device order and U-Boot environment storage device, except that Puma RK3399 also supports SPI Flash. Let's move all of this into a common file where common logic can be put. Cc: Quentin Schulz Signed-off-by: Quentin Schulz Reviewed-by: Kever Yang --- diff --git a/board/theobroma-systems/common/common.c b/board/theobroma-systems/common/common.c new file mode 100644 index 0000000000..eb21d4c455 --- /dev/null +++ b/board/theobroma-systems/common/common.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + */ + +#include +#include +#include +#include + +/* + * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. + * + * If bootsource is uSD-card we can assume that we want to use the + * SD-Card instead of the eMMC as first boot_target for distroboot. + * We only want to swap the defaults and not any custom environment a + * user has set. We exit early if a changed boot_targets environment + * is detected. + */ +int setup_boottargets(void) +{ + const char *boot_device = + ofnode_read_chosen_string("u-boot,spl-boot-device"); + char *env_default, *env; + + if (!boot_device) { + debug("%s: /chosen/u-boot,spl-boot-device not set\n", + __func__); + return -1; + } + debug("%s: booted from %s\n", __func__, boot_device); + + env_default = env_get_default("boot_targets"); + env = env_get("boot_targets"); + if (!env) { + debug("%s: boot_targets does not exist\n", __func__); + return -1; + } + debug("%s: boot_targets current: %s - default: %s\n", + __func__, env, env_default); + + if (strcmp(env_default, env) != 0) { + debug("%s: boot_targets not default, don't change it\n", + __func__); + return 0; + } + + /* + * Make the default boot medium between SD Card and eMMC, the one that + * was used to load U-Boot proper. If SPI-NOR flash was used, keep + * original default order. + */ + struct udevice *devp; + + if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) { + debug("%s: not reordering boot_targets, bootdev %s != MMC\n", + __func__, boot_device); + return 0; + } + + char *mmc0, *mmc1; + + mmc0 = strstr(env, "mmc0"); + mmc1 = strstr(env, "mmc1"); + + if (!mmc0 || !mmc1) { + debug("%s: only one mmc boot_target found\n", __func__); + return -1; + } + + /* + * If mmc0 comes first in the boot order and U-Boot proper was + * loaded from mmc1, swap mmc0 and mmc1 in the list. + * If mmc1 comes first in the boot order and U-Boot proper was + * loaded from mmc0, swap mmc0 and mmc1 in the list. + */ + if ((mmc0 < mmc1 && devp->seq_ == 1) || + (mmc0 > mmc1 && devp->seq_ == 0)) { + mmc0[3] = '1'; + mmc1[3] = '0'; + debug("%s: set boot_targets to: %s\n", __func__, env); + env_set("boot_targets", env); + } + + return 0; +} + +int mmc_get_env_dev(void) +{ + const char *boot_device = + ofnode_read_chosen_string("u-boot,spl-boot-device"); + struct udevice *devp; + + if (!boot_device) { + debug("%s: /chosen/u-boot,spl-boot-device not set\n", + __func__); +#ifdef CONFIG_SYS_MMC_ENV_DEV + return CONFIG_SYS_MMC_ENV_DEV; +#else + return 0; +#endif + } + + debug("%s: booted from %s\n", __func__, boot_device); + + if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) +#ifdef CONFIG_SYS_MMC_ENV_DEV + return CONFIG_SYS_MMC_ENV_DEV; +#else + return 0; +#endif + + debug("%s: get MMC ENV from mmc%d\n", __func__, devp->seq_); + + return devp->seq_; +} + +enum env_location arch_env_get_location(enum env_operation op, int prio) +{ + const char *boot_device = + ofnode_read_chosen_string("u-boot,spl-boot-device"); + struct udevice *devp; + + if (prio > 0) + return ENVL_UNKNOWN; + + if (!boot_device) { + debug("%s: /chosen/u-boot,spl-boot-device not set\n", + __func__); + return ENVL_NOWHERE; + } + + debug("%s: booted from %s\n", __func__, boot_device); + + if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) && + !uclass_find_device_by_ofnode(UCLASS_SPI_FLASH, ofnode_path(boot_device), &devp)) + return ENVL_SPI_FLASH; + + if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) && + !uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) + return ENVL_MMC; + + printf("%s: No environment available: booted from %s but U-Boot config does not allow loading environment from it.", + __func__, boot_device); + + return ENVL_NOWHERE; +} diff --git a/board/theobroma-systems/common/common.h b/board/theobroma-systems/common/common.h new file mode 100644 index 0000000000..488313a2d8 --- /dev/null +++ b/board/theobroma-systems/common/common.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (C) Copyright 2023 Theobroma Systems Design und Consulting GmbH + */ + +/* + * setup_boottargets() - Swap mmc0 and mmc1 in boot_targets depending on U-Boot + * proper load medium. + * + * If bootsource is uSD-card we can assume that we want to use the + * SD-Card instead of the eMMC as first boot_target for distroboot. + * We only want to swap the defaults and not any custom environment a + * user has set. We exit early if a changed boot_targets environment + * is detected. + * + * Return: + * 0 if OK, -1 otherwise + */ +int setup_boottargets(void); diff --git a/board/theobroma-systems/puma_rk3399/MAINTAINERS b/board/theobroma-systems/puma_rk3399/MAINTAINERS index 1ec2dd72d6..93f570fc4f 100644 --- a/board/theobroma-systems/puma_rk3399/MAINTAINERS +++ b/board/theobroma-systems/puma_rk3399/MAINTAINERS @@ -3,6 +3,7 @@ M: Quentin Schulz M: Klaus Goger S: Maintained F: board/theobroma-systems/puma_rk3399 +F: board/theobroma-systems/common F: include/configs/puma_rk3399.h F: arch/arm/dts/rk3399-puma.dts F: configs/puma-rk3399_defconfig diff --git a/board/theobroma-systems/puma_rk3399/Makefile b/board/theobroma-systems/puma_rk3399/Makefile index d962b56f11..edd61a35c1 100644 --- a/board/theobroma-systems/puma_rk3399/Makefile +++ b/board/theobroma-systems/puma_rk3399/Makefile @@ -5,3 +5,6 @@ # obj-y += puma-rk3399.o +ifneq ($(CONFIG_SPL_BUILD),y) +obj-y += ../common/common.o +endif diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index b8b718da24..a82f97b2d5 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -3,28 +3,15 @@ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH */ -#include #include -#include -#include -#include -#include -#include -#include #include -#include -#include #include -#include #include -#include #include #include #include -#include #include -#include -#include +#include "../common/common.h" static void setup_iodomain(void) { @@ -40,145 +27,6 @@ static void setup_iodomain(void) rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT); } -/* - * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. - * - * If bootsource is uSD-card we can assume that we want to use the - * SD-Card instead of the eMMC as first boot_target for distroboot. - * We only want to swap the defaults and not any custom environment a - * user has set. We exit early if a changed boot_targets environment - * is detected. - */ -static int setup_boottargets(void) -{ - const char *boot_device = - ofnode_read_chosen_string("u-boot,spl-boot-device"); - char *env_default, *env; - - if (!boot_device) { - debug("%s: /chosen/u-boot,spl-boot-device not set\n", - __func__); - return -1; - } - debug("%s: booted from %s\n", __func__, boot_device); - - env_default = env_get_default("boot_targets"); - env = env_get("boot_targets"); - if (!env) { - debug("%s: boot_targets does not exist\n", __func__); - return -1; - } - debug("%s: boot_targets current: %s - default: %s\n", - __func__, env, env_default); - - if (strcmp(env_default, env) != 0) { - debug("%s: boot_targets not default, don't change it\n", - __func__); - return 0; - } - - /* - * Make the default boot medium between SD Card and eMMC, the one that - * was used to load U-Boot proper. If SPI-NOR flash was used, keep - * original default order. - */ - struct udevice *devp; - - if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) { - debug("%s: not reordering boot_targets, bootdev %s != MMC\n", - __func__, boot_device); - return 0; - } - - char *mmc0, *mmc1; - - mmc0 = strstr(env, "mmc0"); - mmc1 = strstr(env, "mmc1"); - - if (!mmc0 || !mmc1) { - debug("%s: only one mmc boot_target found\n", __func__); - return -1; - } - - /* - * If mmc0 comes first in the boot order and U-Boot proper was - * loaded from mmc1, swap mmc0 and mmc1 in the list. - * If mmc1 comes first in the boot order and U-Boot proper was - * loaded from mmc0, swap mmc0 and mmc1 in the list. - */ - if ((mmc0 < mmc1 && devp->seq_ == 1) || - (mmc0 > mmc1 && devp->seq_ == 0)) { - mmc0[3] = '1'; - mmc1[3] = '0'; - debug("%s: set boot_targets to: %s\n", __func__, env); - env_set("boot_targets", env); - } - - return 0; -} - -int mmc_get_env_dev(void) -{ - const char *boot_device = - ofnode_read_chosen_string("u-boot,spl-boot-device"); - struct udevice *devp; - - if (!boot_device) { - debug("%s: /chosen/u-boot,spl-boot-device not set\n", - __func__); -#ifdef CONFIG_SYS_MMC_ENV_DEV - return CONFIG_SYS_MMC_ENV_DEV; -#else - return 0; -#endif - } - - debug("%s: booted from %s\n", __func__, boot_device); - - if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) -#ifdef CONFIG_SYS_MMC_ENV_DEV - return CONFIG_SYS_MMC_ENV_DEV; -#else - return 0; -#endif - - debug("%s: get MMC ENV from mmc%d\n", __func__, devp->seq_); - - return devp->seq_; -} - -enum env_location arch_env_get_location(enum env_operation op, int prio) -{ - const char *boot_device = - ofnode_read_chosen_string("u-boot,spl-boot-device"); - struct udevice *devp; - - if (prio > 0) - return ENVL_UNKNOWN; - - if (!boot_device) { - debug("%s: /chosen/u-boot,spl-boot-device not set\n", - __func__); - return ENVL_NOWHERE; - } - - debug("%s: booted from %s\n", __func__, boot_device); - - if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) && - !uclass_find_device_by_ofnode(UCLASS_SPI_FLASH, ofnode_path(boot_device), &devp)) - return ENVL_SPI_FLASH; - - if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) && - !uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) - return ENVL_MMC; - - printf("%s: No environment available: booted from %s but U-Boot " - "config does not allow loading environment from it.", - __func__, boot_device); - - return ENVL_NOWHERE; -} - int misc_init_r(void) { const u32 cpuid_offset = 0x7; diff --git a/board/theobroma-systems/ringneck_px30/MAINTAINERS b/board/theobroma-systems/ringneck_px30/MAINTAINERS index d764e26066..06e1beaab1 100644 --- a/board/theobroma-systems/ringneck_px30/MAINTAINERS +++ b/board/theobroma-systems/ringneck_px30/MAINTAINERS @@ -3,6 +3,7 @@ M: Quentin Schulz M: Klaus Goger S: Maintained F: board/theobroma-systems/ringneck_px30 +F: board/theobroma-systems/common F: include/configs/ringneck_px30.h F: arch/arm/dts/px30-ringneck* F: configs/ringneck-px30_defconfig diff --git a/board/theobroma-systems/ringneck_px30/Makefile b/board/theobroma-systems/ringneck_px30/Makefile index 31ada1a694..45cc65baf9 100644 --- a/board/theobroma-systems/ringneck_px30/Makefile +++ b/board/theobroma-systems/ringneck_px30/Makefile @@ -5,3 +5,6 @@ # obj-y += ringneck-px30.o +ifneq ($(CONFIG_SPL_BUILD),y) +obj-y += ../common/common.o +endif diff --git a/board/theobroma-systems/ringneck_px30/ringneck-px30.c b/board/theobroma-systems/ringneck_px30/ringneck-px30.c index 5d2c76ab90..ff7e414303 100644 --- a/board/theobroma-systems/ringneck_px30/ringneck-px30.c +++ b/board/theobroma-systems/ringneck_px30/ringneck-px30.c @@ -3,163 +3,10 @@ * (C) Copyright 2022 Theobroma Systems Design und Consulting GmbH */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include -#include -#include -#include -#include -#include #include #include -#include -#include - -/* - * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card. - * - * If bootsource is uSD-card we can assume that we want to use the - * SD-Card instead of the eMMC as first boot_target for distroboot. - * We only want to swap the defaults and not any custom environment a - * user has set. We exit early if a changed boot_targets environment - * is detected. - */ -static int setup_boottargets(void) -{ - const char *boot_device = - ofnode_read_chosen_string("u-boot,spl-boot-device"); - char *env_default, *env; - - if (!boot_device) { - debug("%s: /chosen/u-boot,spl-boot-device not set\n", - __func__); - return -1; - } - debug("%s: booted from %s\n", __func__, boot_device); - - env_default = env_get_default("boot_targets"); - env = env_get("boot_targets"); - if (!env) { - debug("%s: boot_targets does not exist\n", __func__); - return -1; - } - debug("%s: boot_targets current: %s - default: %s\n", - __func__, env, env_default); - - if (strcmp(env_default, env) != 0) { - debug("%s: boot_targets not default, don't change it\n", - __func__); - return 0; - } - - /* - * Make the default boot medium between SD Card and eMMC, the one that - * was used to load U-Boot proper. - */ - struct udevice *devp; - - if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) { - debug("%s: not reordering boot_targets, bootdev %s != MMC\n", - __func__, boot_device); - return 0; - } - - char *mmc0, *mmc1; - - mmc0 = strstr(env, "mmc0"); - mmc1 = strstr(env, "mmc1"); - - if (!mmc0 || !mmc1) { - debug("%s: only one mmc boot_target found\n", __func__); - return -1; - } - - /* - * If mmc0 comes first in the boot order and U-Boot proper was - * loaded from mmc1, swap mmc0 and mmc1 in the list. - * If mmc1 comes first in the boot order and U-Boot proper was - * loaded from mmc0, swap mmc0 and mmc1 in the list. - */ - if ((mmc0 < mmc1 && devp->seq_ == 1) || - (mmc0 > mmc1 && devp->seq_ == 0)) { - mmc0[3] = '1'; - mmc1[3] = '0'; - debug("%s: set boot_targets to: %s\n", __func__, env); - env_set("boot_targets", env); - } - - return 0; -} - -int mmc_get_env_dev(void) -{ - const char *boot_device = - ofnode_read_chosen_string("u-boot,spl-boot-device"); - struct udevice *devp; - - if (!boot_device) { - debug("%s: /chosen/u-boot,spl-boot-device not set\n", - __func__); -#ifdef CONFIG_SYS_MMC_ENV_DEV - return CONFIG_SYS_MMC_ENV_DEV; -#else - return 0; -#endif - } - - debug("%s: booted from %s\n", __func__, boot_device); - - if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) -#ifdef CONFIG_SYS_MMC_ENV_DEV - return CONFIG_SYS_MMC_ENV_DEV; -#else - return 0; -#endif - - debug("%s: get MMC ENV from mmc%d\n", __func__, devp->seq_); - - return devp->seq_; -} - -enum env_location arch_env_get_location(enum env_operation op, int prio) -{ - const char *boot_device = - ofnode_read_chosen_string("u-boot,spl-boot-device"); - struct udevice *devp; - - if (prio > 0) - return ENVL_UNKNOWN; - - if (!boot_device) { - debug("%s: /chosen/u-boot,spl-boot-device not set\n", - __func__); - return ENVL_NOWHERE; - } - - debug("%s: booted from %s\n", __func__, boot_device); - - if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) && - !uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) - return ENVL_MMC; - - printf("%s: No environment available: booted from %s but U-Boot " - "config does not allow loading environment from it.", - __func__, boot_device); - - return ENVL_NOWHERE; -} +#include "../common/common.h" int misc_init_r(void) {