From: Vignesh Raghavendra Date: Thu, 8 Oct 2020 09:28:38 +0000 (+0530) Subject: phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=555ee3949307648d6c40081b30e212af075ab8a8;p=u-boot.git phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property "ti,dis-chg-det-quirk" property is not part of Linux kernel DT binding documentation. Therefore drop this and instead use soc_device_match() to distinguish b/w AM654 SR1.0 and SR2.0 devices similar to Linux kernel driver. Signed-off-by: Vignesh Raghavendra --- diff --git a/drivers/phy/omap-usb2-phy.c b/drivers/phy/omap-usb2-phy.c index adc454ddd4..a981cb2f8d 100644 --- a/drivers/phy/omap-usb2-phy.c +++ b/drivers/phy/omap-usb2-phy.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -196,6 +197,11 @@ struct phy_ops omap_usb2_phy_ops = { .exit = omap_usb2_phy_exit, }; +static const struct soc_attr am65x_sr10_soc_devices[] = { + { .family = "AM65X", .revision = "SR1.0" }, + { /* sentinel */ } +}; + int omap_usb2_phy_probe(struct udevice *dev) { int rc; @@ -222,10 +228,9 @@ int omap_usb2_phy_probe(struct udevice *dev) * Disabling the USB2_PHY Charger Detect function will put D+ * into the normal state. * - * Using property "ti,dis-chg-det-quirk" in the DT usb2-phy node - * to enable this workaround for AM654x PG1.0. + * Enable this workaround for AM654x PG1.0. */ - if (dev_read_bool(dev, "ti,dis-chg-det-quirk")) + if (soc_device_match(am65x_sr10_soc_devices)) priv->flags |= OMAP_USB2_DISABLE_CHG_DET; regmap = syscon_regmap_lookup_by_phandle(dev, "syscon-phy-power");