From: Detlev Zundel Date: Thu, 8 Apr 2010 09:49:59 +0000 (+0200) Subject: mpc512x_fec: Move PHY initialization from probe into init routine. X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=5525856d59910c72687ab6201f39cdf1c04cfc15;p=u-boot.git mpc512x_fec: Move PHY initialization from probe into init routine. This saves the autonegotation delay when not using ethernet in U-Boot Signed-off-by: Detlev Zundel Signed-off-by: Ben Warren --- diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c index 3aba748aa1..c580c827a6 100644 --- a/drivers/net/mpc512x_fec.c +++ b/drivers/net/mpc512x_fec.c @@ -160,7 +160,7 @@ static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) } /********************************************************************/ -static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) +static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, unsigned char *mac) { u8 currByte; /* byte for which to compute the CRC */ int byte; /* loop - counter */ @@ -226,6 +226,12 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) printf ("mpc512x_fec_init... Begin\n"); #endif + mpc512x_fec_set_hwaddr (fec, dev->enetaddr); + out_be32(&fec->eth->gaddr1, 0x00000000); + out_be32(&fec->eth->gaddr2, 0x00000000); + + mpc512x_fec_init_phy (dev, bis); + /* Set interrupt mask register */ out_be32(&fec->eth->imask, 0x00000000); @@ -611,8 +617,6 @@ int mpc512x_fec_initialize (bd_t * bis) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; mpc512x_fec_priv *fec; struct eth_device *dev; - int i; - char *tmp, *end, env_enetaddr[6]; void * bd; fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); @@ -663,25 +667,6 @@ int mpc512x_fec_initialize (bd_t * bis) */ out_be32(&fec->eth->ievent, 0xffffffff); - /* - * Try to set the mac address now. The fec mac address is - * a garbage after reset. When not using fec for booting - * the Linux fec driver will try to work with this garbage. - */ - tmp = getenv ("ethaddr"); - if (tmp) { - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; - } - mpc512x_fec_set_hwaddr (fec, env_enetaddr); - out_be32(&fec->eth->gaddr1, 0x00000000); - out_be32(&fec->eth->gaddr2, 0x00000000); - } - - mpc512x_fec_init_phy (dev, bis); - return 1; }