From: Fabio Estevam Date: Sat, 26 Mar 2022 14:47:40 +0000 (-0300) Subject: imx8/ls10xx: Use a sane SYS_MALLOC_F_LEN default X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=545eceb52062cdc995c45b9581174b7ae66b0e6f;p=u-boot.git imx8/ls10xx: Use a sane SYS_MALLOC_F_LEN default When adding new features to imx8m boards, such as DM clock support, the malloc area can be exhausted. To avoid such issue, provide a reasonable default for the SYS_MALLOC_F_LEN size. Quoting Tom Rini: "This seems to be an area where everyone is either: - Kicking the value up a bit for themselves - Having hard to figure out problems booting the platform because it's too small a value until they see someone else picked a larger value. So lets raise these a bit and get some acks, please." Suggested-by: Heinrich Schuchardt Signed-off-by: Fabio Estevam Tested-by: Adam Ford #imx8mm-beacon, imx8mn-beacon Tested-by: Heiko Thiery --- diff --git a/Kconfig b/Kconfig index 678317e4d3..6b1ddfc549 100644 --- a/Kconfig +++ b/Kconfig @@ -249,10 +249,10 @@ config SYS_MALLOC_F_LEN depends on SYS_MALLOC_F default 0x1000 if AM33XX default 0x4000 if SANDBOX || RISCV - default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ - ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ - ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ - ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) + default 0x2000 if (ARCH_MX7 || ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ + ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) + default 0x10000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_LS1012A || \ + ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) default 0x400 help Before relocation, memory is very limited on many platforms. Still,